Nissan Xterra. Manual — part 502
CHASSIS AND BODY MAINTENANCE
MA-33
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
• Follow the maintenance schedule for tire rotation service intervals.
Refer to
XX-XX, "*****"
.
• When installing the wheel, tighten wheel nuts to the specified
torque.
CAUTION:
• Do not include the spare tire when rotating the tires.
• When installing wheels, tighten them diagonally by dividing
the work two to three times in order to prevent the wheels
from developing any distortion.
• Be careful not to tighten wheel nut at torque exceeding the
criteria for preventing strain of disc rotor.
• Use NISSAN genuine wheel nuts for aluminum wheels.
• Perform the ID registration, after tire rotation. Refer to
XX-XX, "*****"
.
BRAKE FLUID LEVEL AND LEAKS
BRAKE FLUID LEVEL AND LEAKS : Checking Brake Fluid Level and Leaks
INFOID:0000000009484295
• Check the brake fluid level in the reservoir tank. It should be
between the “MAX” and “MIN” lines on the reservoir tank.
• Visually check around reservoir tank for fluid leaks.
• If the fluid level is extremely low, check the brake system.
• If the brake warning lamp comes on when the fluid is at the correct
level, check the brake fluid level switch and the parking brake
switch.
BRAKE LINES AND CABLES
BRAKE LINES AND CABLES : Checking Brake Line and Cables
INFOID:0000000009484296
1. Check the brake lines and hoses for cracks, deterioration, and
other damage. Replace any damaged parts.
CAUTION:
If brake fluid leaks are visible around the brake line joints,
retighten the joint, or replace damaged parts as necessary.
2. Check for brake fluid leaks by fully depressing brake pedal while
engine is running.
DISC BRAKE
DISC BRAKE : Checking Disc Brake
INFOID:0000000009484297
ROTOR
Wheel nut tightening
torque
: 133 N·m (14 kg-m, 98 ft-lb)
SMA829C
LFIA0234E
SBR389C
MA-34
< PERIODIC MAINTENANCE >
CHASSIS AND BODY MAINTENANCE
Check the condition of the rotor, and for any wear or damage. Repair
or replace as necessary.
CALIPER
Check for any fluid leakage. Repair as necessary.
PAD
Inspect the thickness of pad through cylinder body inspection hole.
Use a scale for inspection if necessary.
STEERING GEAR AND LINKAGE
STEERING GEAR AND LINKAGE : Checking Steering Gear and Linkage
INFOID:0000000009484298
STEERING GEAR
• Check the steering gear housing for looseness, damage and oil
leakage as shown.
• Check the steering column connections for looseness.
STEERING LINKAGE
• Check the ball joint, dust cover and other component parts for looseness, wear, damage and grease leak-
age.
POWER STEERING FLUID AND LINES
Standard thickness
: Refer to
(rear).
Repair limit thickness
(rear).
SBR020B
SMA922A
Standard thickness
: Refer to
(rear).
Repair limit thickness : Refer to
(rear).
BRA0010D
SGIA0506E
CHASSIS AND BODY MAINTENANCE
MA-35
< PERIODIC MAINTENANCE >
C
D
E
F
G
H
I
J
K
L
M
B
MA
N
O
A
POWER STEERING FLUID AND LINES : Checking Power Steering Fluid and Line
INFOID:0000000009484299
CHECKING FLUID LEVEL
• Check the power steering fluid level with the engine off.
• Check fluid level on reservoir. Use “HOT” range at fluid tempera-
tures of 50
° to 80°C (122° to 176°F). Use “COLD” range at fluid
temperatures of 0
° to 30°C (32° to 86°F).
CAUTION:
• Do not overfill.
• Fill with the recommended fluid or equivalent. Refer to
CHECKING LINES
• Check lines for improper attachment, leaks, cracks, damage, loose
connections, chafing and deterioration. Refer to
.
AXLE AND SUSPENSION PARTS
AXLE AND SUSPENSION PARTS : Checking Axle and Suspension Parts
INFOID:0000000009484300
FRONT AND REAR AXLE AND SUSPENSION PARTS
Check front and rear axle and suspension parts for excessive play, cracks, wear or other damage.
• Shake each wheel to check for excessive play.
• Rotate each wheel to check for abnormal noise.
• Check axle and suspension nuts and bolts for looseness.
• Check the strut and shock absorber for oil leakage or other damage.
• Check suspension ball joints for grease leakage and ball joint dust cover for cracks or other damage.
FRONT DRIVE SHAFT
LGIA0021E
SGIA0506E
SMA525A
MA-36
< PERIODIC MAINTENANCE >
CHASSIS AND BODY MAINTENANCE
Check the boots and drive shaft for cracks, wear, damage, and
grease leakage.
LOCKS, HINGES AND HOOD LATCH
SFA108A
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст