Nissan Xterra. Manual — part 697
HIGH AND LOW REVERSE CLUTCH
TM-301
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
• Check facing for burns, cracks or damage.
High and Low Reverse Clutch Retaining Plate and Driven Plates
• Check facing for burns, cracks or damage.
ASSEMBLY
1. Install drive plates, driven plates and retaining plate in high and
low reverse clutch drum.
CAUTION:
Take care with the order of plates.
• Snap ring (1)
• Retaining plate (2)
• Drive plate (3)
• Driven plate (4)
• Drive plate/Driven plate: 5/5
2. Install snap ring in high and low reverse clutch drum using suit-
able tool.
3. Install bearing race to high and low reverse clutch drum.
CAUTION:
Apply petroleum jelly to bearing race.
SCIA7134E
SCIA2868E
SCIA5215E
TM-302
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
DIRECT CLUTCH
DIRECT CLUTCH
Exploded View
INFOID:0000000009485628
Disassembly and Assembly
INFOID:0000000009485629
DISASSEMBLY
1. Remove snap ring from direct clutch drum using suitable tool.
2. Remove retaining plates, drive plates, driven plates and dish
plate from direct clutch drum.
INSPECTION
• Check the following, and replace direct clutch assembly if necessary.
Direct Clutch Snap Ring
• Check for deformation, fatigue or damage.
Direct Clutch Drive Plates
• Check facing for burns, cracks or damage.
Direct Clutch Retaining Plate and Driven Plates
• Check facing for burns, cracks or damage.
Direct Clutch Dish Plate
• Check facing for burns, cracks or damage.
ASSEMBLY
1.
Direct clutch drum
2.
Driven plate
3.
Retaining plate
4.
Snap ring
5.
Drive plate
6.
Dish plate
JSDIA1949ZZ
SCIA2868E
DIRECT CLUTCH
TM-303
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
1. Install dish plate, retaining plate, drive plates and driven plates
in direct clutch drum.
CAUTION:
Take care with order of plates.
• Snap ring (1)
• Retaining plate (2)
• Drive plate (3)
• Driven plate (4)
• Dish plate (5)
• Drive plate/Driven plate: 5/5
2. Install snap ring in direct clutch drum using suitable tool.
JSDIA1919ZZ
SCIA2868E
TM-304
< UNIT DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
ASSEMBLY
ASSEMBLY
Assembly (1)
INFOID:0000000009485630
1. Drive manual shaft oil seals into the transmission case until they
are flush using suitable tool.
CAUTION:
• Apply ATF to manual shaft oil seals.
• Do not reuse manual shaft oil seals.
2. Install detent spring and spacer in transmission case and secure
with the bolt.
3. Install manual shaft to transmission case.
4. Install parking rod to manual plate.
SCIA5259E
Bolt
: 7.9 N·m (0.81 kg-m, 70 in-lb)
SCIA5248E
SCIA5716E
SCIA5220E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст