Nissan March K13. Manual — part 375
HAC-34
< WIRING DIAGRAM >
[AUTOMATIC AIR CONDITIONER]
AUTOMATIC AIR CONDITIONING SYSTEM
WIRING DIAGRAM
AUTOMATIC AIR CONDITIONING SYSTEM
Wiring Diagram
INFOID:0000000006024062
For connector terminal arrangements, harness layouts, and alphabets in a
(option abbreviation; if not
described in wiring diagram), refer to
GI-12, "Connector Information"
JCIWM0485GB
AUTOMATIC AIR CONDITIONING SYSTEM
HAC-35
< WIRING DIAGRAM >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
JCIWM0486GB
HAC-36
< BASIC INSPECTION >
[AUTOMATIC AIR CONDITIONER]
DIAGNOSIS AND REPAIR WORK FLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000006024007
OVERALL SEQUENCE
DETAILED FLOW
JPIIA1650GB
DIAGNOSIS AND REPAIR WORK FLOW
HAC-37
< BASIC INSPECTION >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
1.
INTERVIEW FOR MALFUNCTION
Interview the symptom to the customer.
>> GO TO 2.
2.
SYMPTOM CHECK
Check the symptom from the customer's information.
>> GO TO 3.
3.
BASIC INSPECTION
Check the operation of each part. Check that any symptom occurs other than the interviewed symptom.
>> GO TO 4.
4.
SELF-DIAGNOSIS WITH ON BOARD DIAGNOSIS SYSTEM
Perform the self-diagnosis with on board diagnosis. Check that whether malfunction result is detected or not.
Refer to
HAC-22, "Diagnosis Description"
Is any malfunction result detected?
YES
>> GO TO 5.
NO
>> GO TO 6.
5.
TROUBLE DIAGNOSIS BY MALFUNCTION
Perform the trouble diagnosis for the detected malfunction result. Specify the malfunction part.
>> GO TO 6.
6.
SELF-DIAGNOSIS WITH CONSULT-III
Perform the self-diagnosis with CONSULT-III. Check that any DTC is detected.
Is any DTC detected?
YES
>> GO TO 7.
NO
>> GO TO 8.
7.
TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
>> GO TO 8.
8.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
>> GO TO 9.
9.
MALFUNCTION PART REPAIR
Repair or replace the malfunctioning part.
>> GO TO 10.
10.
REPAIR CHECK (SELF-DIAGNOSIS WITH ON BOARD DIAGNOSIS AND CONSULT-III)
Perform the self-diagnoses with on board diagnosis and CONSULT-III. Check that any DTC or malfunction
result is not detected. Erase DTC if DTC is detected before the repair. Check that DTC is not detected again.
Is any or malfunction result or DTC detected?
YES-1 >> If malfunction result is detected, GO TO 5.
YES-2 >> If DTC is detected, GO TO 7.
NO
>> GO TO 11.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст