Nissan March K13. Manual — part 97
TAKE AWAY WARNING DOES NOT OPERATE
DLK-99
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
TAKE AWAY WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000005948950
1.
CHECK DOOR SWITCH
Check door switch.
Refer to
DLK-58, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
• Instrument center: Refer to
.
• Luggage room: Refer to
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK COMBINATION METER BUZZER
Check combination meter buzzer.
Refer to
DLK-82, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-79, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK KEY WARNING LAMP
Check key warning lamp.
Refer to
DLK-83, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
REPLACE BCM
• Replace BCM. Refer to
BCS-57, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-33, "Intermittent Incident"
.
DLK-100
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000005948951
1.
CHECK “LO- BATT OF KEY FOB WARN” SETTING IN “WORK SUPPORT”
1.
Select “INTELLIGENT KEY” of “BCM”.
2.
Select “LO- BATT OF KEY FOB WARN” in “WORK SUPPORT” mode.
3.
Check “LO- BATT OF KEY FOB WARN” setting in “WORK SUPPORT”.
Refer to
DLK-24, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “ON” in “LO- BATT OF KEY FOB WARN”.
2.
CHECK INTELLIGENT KEY
Check Intelligent key.
Refer to
DLK-81, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK KEY WARNING LAMP
Check key warning lamp.
Refer to
DLK-83, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
• Instrument center: Refer to
.
• Console: Refer to
• Luggage room: Refer to
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
REPLACE BCM
• Replace BCM. Refer to
BCS-57, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-33, "Intermittent Incident"
.
DOOR LOCK OPERATION WARNING DOES NOT OPERATE
DLK-101
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK OPERATION WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000005948952
1.
CHECK DOOR LOCK FUNCTION
Check door lock function.
Does door lock/unlock using door request switch?
YES
>> GO TO 2.
NO
>> Refer to
DLK-90, "DRIVER SIDE : Diagnosis Procedure"
2.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to
DLK-79, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
• Replace BCM. Refer to
BCS-57, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-33, "Intermittent Incident"
.
DLK-102
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
KEY ID WARNING DOES NOT OPERATE
KEY ID WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000005948953
1.
CHECK INTELLIGENT KEY
Check Intelligent Key.
Refer to
DLK-81, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK KEY WARNING LAMP
Check key warning lamp.
Refer to
DLK-83, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
• Replace BCM. Refer to
BCS-57, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> INSPECTION END
NO
>> Check intermittent incident. Refer to
GI-33, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст