Nissan March K13. Manual — part 74
DLK-7
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR STRIKER : Removal and Installation . .
DOOR HINGE . . . . . . . . . . . . . . ..
DOOR HINGE : Removal and Installation . . . .
DOOR CHECK LINK . . . . . . . . . . . ...
DOOR CHECK LINK : Removal and Installation ..
BACK DOOR . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ..
BACK DOOR ASSEMBLY . . . . . . . . . ..
BACK DOOR ASSEMBLY : Removal and Installa-
tion . . . . . . . . . . . . . . . . . .
BACK DOOR ASSEMBLY : Adjustment . . . ...
BACK DOOR STRIKER . . . . . . . . . . ..
BACK DOOR STRIKER : Removal and Installa-
tion . . . . . . . . . . . . . . . . . .
BACK DOOR HINGE . . . . . . . . . . . ...
BACK DOOR HINGE : Removal and Installation ..
BACK DOOR STAY . . . . . . . . . . . .
BACK DOOR STAY : Removal and Installation .
BACK DOOR STAY : Disposal . . . . . . . .
BACK DOOR WEATHER-STRIP . . . . . . .
BACK DOOR WEATHER-STRIP : Removal and
Installation . . . . . . . . . . . . . . . .
HOOD LOCK . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ..
Removal and Installation . . . . . . . . . ...
Inspection . . . . . . . . . . . . . . . ..
FRONT DOOR LOCK . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . ..
DOOR LOCK . . . . . . . . . . . . . . ...
DOOR LOCK : Removal and Installation . . . ..
INSIDE HANDLE . . . . . . . . . . . . . .
INSIDE HANDLE : Removal and Installation . .
OUTSIDE HANDLE . . . . . . . . . . . . ..
OUTSIDE HANDLE : Removal and Installation . .
REAR DOOR LOCK . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
DOOR LOCK . . . . . . . . . . . . . . .
DOOR LOCK : Removal and Installation . . . ...
INSIDE HANDLE . . . . . . . . . . . . . ..
INSIDE HANDLE : Removal and Installation . . .
OUTSIDE HANDLE . . . . . . . . . . . . ..
OUTSIDE HANDLE : Removal and Installation . .
BACK DOOR LOCK . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . ...
BACK DOOR STRIKER . . . . . . . . . . ...
BACK DOOR STRIKER : Removal and Installa-
tion . . . . . . . . . . . . . . . . . . .
DOOR LOCK . . . . . . . . . . . . . . .
DOOR LOCK : Removal and Installation . . . ...
OUTSIDE HANDLE . . . . . . . . . . . . ..
OUTSIDE HANDLE : Removal and Installation . .
EMERGENCY LEVER . . . . . . . . . . . .
EMERGENCY LEVER : Unlock procedures . . ..
FUEL FILLER LID OPENER . . . . . . ...
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
DOOR SWITCH . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
REMOTE KEYLESS ENTRY RECEIVER . ...
Removal and Installation . . . . . . . . . ...
KEYFOB BATTERY . . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
DLK-8
< PRECAUTION >
[WITH INTELLIGENT KEY SYSTEM]
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000006067020
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the “SRS AIR BAG” and
“SEAT BELT” of this Service Manual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SRS AIR BAG”.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s)
with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly
causing serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
INFOID:0000000006067021
NOTE:
• Before removing and installing any control units, first turn the push-button ignition switch to the LOCK posi-
tion, then disconnect both battery cables.
• After finishing work, confirm that all control unit connectors are connected properly, then re-connect both
battery cables.
• Always use CONSULT-III to perform self-diagnosis as a part of each function inspection after finishing work.
If a DTC is detected, perform trouble diagnosis according to self-diagnosis results.
For vehicle with steering lock unit, if the battery is disconnected or discharged, the steering wheel will lock and
cannot be turned.
If turning the steering wheel is required with the battery disconnected or discharged, follow the operation pro-
cedure below before starting the repair operation.
OPERATION PROCEDURE
1.
Connect both battery cables.
NOTE:
Supply power using jumper cables if battery is discharged.
2.
Turn the push-button ignition switch to ACC position.
(At this time, the steering lock will be released.)
3.
Disconnect both battery cables. The steering lock will remain released with both battery cables discon-
nected and the steering wheel can be turned.
4.
Perform the necessary repair operation.
5.
When the repair work is completed, re-connect both battery cables. With the brake pedal released, turn
the push-button ignition switch from ACC position to ON position, then to LOCK position. (The steering
wheel will lock when the push-button ignition switch is turned to LOCK position.)
6.
Perform self-diagnosis check of all control units using CONSULT-III.
PRECAUTIONS
DLK-9
< PRECAUTION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Work
INFOID:0000000005948961
• After removing and installing the opening/closing parts, be sure to carry out fitting adjustments to check their
operational.
• Check the lubrication level, damage, and wear of each part. If necessary, grease or replace it.
DLK-10
< PREPARATION >
[WITH INTELLIGENT KEY SYSTEM]
PREPARATION
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000005948963
Tool name
Description
Engine ear
Locates the noise
Remover tool
Removes the clips, pawls, and metal clips
Power tool
SIIA0995E
JMKIA3050ZZ
PIIB1407E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст