Nissan March K13. Manual — part 310
EXL-66
< DTC/CIRCUIT DIAGNOSIS >
FRONT FOG LAMP CIRCUIT
FRONT FOG LAMP CIRCUIT
Component Function Check
INFOID:0000000005912416
1.
CHECK FRONT FOG LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Activate IPDM E/R auto active test. Refer to
PCS-11, "Diagnosis Description"
.
2.
Check that the front fog lamp is turned ON.
CONSULT-III ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the front fog lamp is turned ON.
Is the front fog lamp turned ON?
YES
>> Front fog lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000005912417
1.
CHECK FRONT FOG LAMP INPUT SIGNAL
CONSULT-III ACTIVE TEST
1.
Disconnect the front fog lamp connector.
2.
Turn the ignition switch ON.
3.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
4.
With operating the test items, check the voltage between the front fog lamp harness connector and the
ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK FRONT FOG LAMP GROUND CIRCUIT
1.
Turn the ignition switch OFF.
2.
Check continuity between the front fog lamp relay harness connector and ground.
Is the inspection result normal?
YES
>> Replace the bulb.
NO
>> Repair the harnesses or connectors.
3.
CHECK FRONT FOG LAMP OPEN CIRCUIT
Fog
: Front fog lamp ON
Off
: Front fog lamp OFF
Terminals
Test item
Voltage
(Approx.)
(+)
(
−
)
Front fog lamp
Ground
EXTERNAL LAMPS
Connector
Terminal
E30
1
Fog
Battery voltage
Off
0 V
E48
Fog
Battery voltage
Off
0 V
Front fog lamp
Ground
Continuity
Connector
Terminal
E30
1
Existed
E48
1
FRONT FOG LAMP CIRCUIT
EXL-67
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
1.
Turn the ignition switch OFF.
2.
Disconnect front fog lamp relay connector.
3.
Check continuity between the front fog lamp relay harness connector and the front fog lamp harness con-
nector.
Is the inspection result normal?
YES
>> Replace front fog lamp relay.
NO
>> Repair the harnesses or connectors.
Front fog lamp relay
Front fog lamp
Continuity
Connector
Terminal
Connector
Terminal
E3
3
E30
1
Existed
E48
1
EXL-68
< DTC/CIRCUIT DIAGNOSIS >
PARKING LAMP CIRCUIT
PARKING LAMP CIRCUIT
Component Function Check
INFOID:0000000005912422
1.
CHECK PARKING LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
1.
Activate IPDM E/R auto active test. Refer to
PCS-11, "Diagnosis Description"
.
2.
Check that the parking lamp is turned ON.
CONSULT-III ACTIVE TEST
1.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2.
With operating the test items, check that the parking lamp is turned ON.
Is the parking lamp turned ON?
YES
>> Parking lamp circuit is normal.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000005912423
1.
CHECK PARKING LAMP FUSE
1.
Turn the ignition switch OFF.
2.
Check that the following fuses are not fusing.
Is the fuse fusing?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK PARKING LAMP SHORT CIRCUIT
1.
Disconnect IPDM E/R, parking, license plate and tail lamps connectors.
2.
Check continuity between the IPDM E/R harness connector and the ground.
Does continuity exist?
YES
>> Repair the harnesses or connectors. And then replace the fuse.
NO
>> Replace the fuse. (Replace IPDM E/R if fusing is found again.)
3.
CHECK PARKING LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>> GO TO 4.
NO
>> Replace the bulb.
4.
CHECK PARKING LAMP OUTPUT VOLTAGE
CONSULT-III ACTIVE TEST
1.
Disconnect the parking lamp connector.
2.
Connect the IPDM E/Rconnector.
3.
Turn the ignition switch ON.
4.
Select “EXTERNAL LAMPS” of IPDM E/R active test item.
TAIL
: Parking lamp ON
Off
: Parking lamp OFF
Unit
Location
Fuse No.
Capacity
• Parking lamp
• License plate lamp
• Tail lamp
IPDM E/R
#46
10 A
IPDM E/R
Ground
Continuity
Connector
Terminal
E14
59
Not existed
PARKING LAMP CIRCUIT
EXL-69
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
5.
With operating the test items, check the voltage between the IPDM E/R harness connector and the
ground.
Is the measurement value normal?
YES
>> GO TO 5.
NO
>> Replace IPDM E/R. Refer to
PCS-28, "Removal and Installation"
.
5.
CHECK PARKING LAMP OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect IPDM E/R connector.
3.
Check continuity between the IPDM E/R harness connector and the parking lamp harness connector.
Does continuity exist?
YES
>> GO TO 6.
NO
>> Repair the harnesses or connectors.
6.
CHECK PARKING LAMP GROUND OPEN CIRCUIT
Check continuity between the parking lamp harness connector and the ground.
Does continuity exist?
YES
>> Replace the front combination lamp.
NO
>> Repair the harnesses or connectors.
Terminals
Test item
Voltage
(Approx.)
(+)
(
−
)
IPDM E/R
Ground
EXTERNAL LAMPS
Connector
Terminal
E14
59
TAIL
Battery voltage
OFF
0 V
IPDM E/R
Parking lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E14
59
E43
1
Existed
LH
E24
1
Parking lamp
Ground
Continuity
Connector
Terminal
RH
E43
2
Existed
LH
E24
2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст