Nissan March K13. Manual — part 386
HAC-78
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONER]
SUNLOAD SENSOR
SUNLOAD SENSOR
Removal and Installation
INFOID:0000000006024090
REMOVAL
1.
Insert the appropriate tool into the clearance between sunload sensor and instrument panel assembly to
pull out sunload sensor upward.
2.
Disconnect sunload sensor connector to remove sunload sensor.
INSTALLATION
Installation is basically the reverse order of removal.
INTAKE SENSOR
HAC-79
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
INTAKE SENSOR
Exploded View
INFOID:0000000006024091
.
Removal and Installation
INFOID:0000000006024092
REMOVAL
1.
Remove the evaporator assembly. Refer to
HA-43, "EVAPORATOR : Removal and Installation"
.
2.
Remove the intake sensor from evaporator.
INSTALLATION
Note the following items, and then install in the order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply the compressor oil to them when installing.
• Mark the mounting position of intake sensor bracket prior to removal so that the reinstalled sensor
can be located in the same position.
• Never rotate the bracket insertion part when removing and installing the intake sensor.
• Check for leakages when recharging refrigerant. Refer to
HAC-80
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONER]
REFRIGERANT PRESSURE SENSOR
REFRIGERANT PRESSURE SENSOR
Exploded View
INFOID:0000000006024093
.
Removal and Installation
INFOID:0000000006024094
CAUTION:
Perform lubricant return operation before each refrigeration system disassembly. However, if a large
amount of refrigerant or lubricant is detected, never perform lubricant return operation. Refer to
22, "Perform Lubricant Return Operation"
REMOVAL
1.
Remove refrigerant pressure sensor. Refer to
HA-37, "REFRIGERANT PRESSURE SENSOR : Removal
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Replace O-ring with new one. Then apply compressor oil to them when installing.
• Check for leakages when recharging refrigerant. Refer to
POWER TRANSISTOR
HAC-81
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
POWER TRANSISTOR
Exploded View
INFOID:0000000006024095
Removal and Installation
INFOID:0000000006024096
REMOVAL
1.
Disconnect power transister connector.
2.
Remove mounting screws, and then remove power transister.
INSTALLATION
Install in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст