Nissan Maxima (2020 year). Manual — part 11

1.

Intelligent Keys (two sets)

2.

Mechanical keys

3.

Key number plate (one plate)

NISSAN INTELLIGENT KEY®

Your vehicle can only be driven with the
Intelligent Keys which are registered to
your vehicle’s Intelligent Key System com-
ponents.

Never leave these keys in the vehicle.

As many as four Intelligent Keys can be
registered and used with one vehicle. The
new keys must be registered by a NISSAN
dealer prior to use with the Intelligent Key
System of your vehicle. Since the registra-

tion process requires erasing all memory in
the Intelligent Key components when reg-
istering new keys, be sure to take all Intelli-
gent Keys that you have to the NISSAN
dealer.

A key number plate is supplied with your
keys. Record the key number and keep it in
a safe place (such as your wallet), not in the
vehicle. If you lose your keys, it is recom-
mended that you visit a NISSAN dealer for
duplicates by using the key number.
NISSAN does not record key numbers so it
is very important to keep track of your key
number plate.

A key number is only necessary when you
have lost all keys and do not have one to
duplicate from. If you still have a key, it can
be duplicated without knowing the key
number.

CAUTION

Listed below are conditions or occur-
rences which will damage the Intelli-
gent Key:

∙ Do not allow the Intelligent Key, which

contains electrical components, to
come into contact with water or salt
water. This could affect the system
function.

∙ Do not drop the Intelligent Key.

∙ Do not strike the Intelligent Key

sharply against another object.

∙ Do not change or modify the Intelli-

gent Key.

∙ Wetting may damage the Intelligent

Key. If the Intelligent Key gets wet, im-
mediately wipe until it is completely
dry.

∙ Do not place the Intelligent Key for an

extended period in an area where
temperatures exceed 140°F (60°C).

∙ Do not attach the Intelligent Key with

a key holder that contains a magnet.

∙ Do not place the Intelligent Key near

equipment that produces a magnetic
field, such as a TV, audio equipment
and personal computers.

If an Intelligent Key is lost or stolen, NISSAN
recommends erasing the ID code of that
Intelligent Key from the vehicle. This may
prevent the unauthorized use of the Intelli-
gent Key to operate the vehicle. For infor-
mation regarding the erasing procedure, it
is recommended that you visit a NISSAN
dealer.

LPD2875

KEYS

3-2

Pre-driving checks and adjustments

Mechanical key

The Intelligent Key contains the mechani-
cal key, which can be used in case of a
discharged battery.

To remove the mechanical key, release the
lock knob on the back of the Intelligent Key.

To install the mechanical key, firmly insert it
into the Intelligent Key until the lock knob
returns to the lock position.

The mechanical key can be used for opera-
tion in the same way as an ordinary key.

CAUTION

Always carry the mechanical key in-
stalled in the Intelligent Key slot.

For additional information, refer to “Doors”
in this section and “Storage” in the “Instru-
ments and controls” section of this manual.

Valet hand-off

When you have to leave a key with a valet,
give them the Intelligent Key itself and keep
the mechanical key with you to protect
your belongings.

To prevent the glove box from being
opened during valet hand-off, follow the
procedures below.

1. Remove the mechanical key from the

Intelligent Key.

2. Lock the glove box with the mechani-

cal key.

3. Hand the Intelligent Key to the valet

and keep the mechanical key with you.

For additional information, refer to “Stor-
age” in the “Instruments and controls” sec-
tion of this manual.

NISSAN VEHICLE IMMOBILIZER
SYSTEM KEYS

You can only drive your vehicle using the
Intelligent Keys which are registered to the
NISSAN Vehicle Immobilizer System com-
ponents in your vehicle.

The mechanical key can be used for all the
locks.

Never leave the keys in the vehicle.

Additional or replacement keys:

If you still have a key, the key number is not
necessary when you need extra NISSAN Ve-
hicle Immobilizer System keys. Your existing
key can be duplicated without knowing the
key number. As many as four NISSAN Vehicle
Immobilizer System keys can be used with
one vehicle. You should bring all NISSAN Ve-
hicle Immobilizer System keys that you have
to the NISSAN dealer for registration. This is
because the registration process will erase
the memory of all key codes previously regis-
tered into the NISSAN Vehicle Immobilizer
System. After the registration process, these
components will only recognize keys coded
into the NISSAN Vehicle Immobilizer System
during registration. Any key that is not given
to the dealer at the time of registration will no
longer be able to start your vehicle.

SPA1951

Pre-driving checks and adjustments

3-3

CAUTION

Do not allow the immobilizer system
key, which contains an electrical tran-
sponder, to come into contact with wa-
ter or salt water. This could affect sys-
tem function.

When the doors are locked using one of the
following methods, the doors cannot be
opened using the inside or outside door
handles. The doors must be unlocked to
open the doors.

WARNING

∙ Always have the doors locked while

driving. Along with the use of seat
belts, this provides greater safety in
the event of an accident by helping to
prevent persons from being thrown
from the vehicle. This also helps keep
children and others from unintention-
ally opening the doors, and will help
keep out intruders.

∙ Before opening any door, always look

for and avoid oncoming traffic.

∙ To help avoid risk of injury or death

through unintended operation of the
vehicle and/or its systems, including
entrapment in windows or inadver-
tent door lock activation, do not leave
children, people who require the as-
sistance of others or pets unattended
in your vehicle. Additionally, the tem-
perature inside a closed vehicle on a
warm day can quickly become high
enough to cause a significant risk of
injury or death to people and pets.

DOORS

3-4

Pre-driving checks and adjustments

LOCKING WITH KEY

To lock the door using the mechanical key,
turn the key toward the front of the vehicle

䊊

1

. This will only lock the corresponding

door and will not activate the security sys-
tem. To arm the security system, press
the

button on the Intelligent Key.

To unlock the corresponding door using
the mechanical key, turn the key toward
the rear of the vehicle. This will only unlock
the corresponding door and will not dis-
arm the security system.

䊊

2

.

For additional information, refer to “Security
systems” in the “Instruments and controls”
section of this manual

LOCKING WITH INSIDE LOCK KNOB

To lock the door without the key, move the
inside lock knob to the lock position

䊊

1

,

then close the door.

To unlock the door without the key, move
the inside lock knob to the unlock position

䊊

2

.

Driver’s side

LPD2129

Inside lock

LPD2092

Pre-driving checks and adjustments

3-5

LOCKING WITH POWER DOOR
LOCK SWITCH

To lock all the doors without a key, push the
door lock switch (driver’s or front passen-
ger’s side) to the lock position

䊊

1

. When

locking the door this way, be certain not to
leave the key inside the vehicle.

To unlock all the doors without a key, push
the door lock switch (driver’s or front pas-
senger’s side) to the unlock position

䊊

2

.

Lockout protection

When the power door lock switch (driver’s
or front passenger’s side) is moved to the
lock position with the Intelligent Key left in
the vehicle and any door open, all doors will
unlock automatically and a chime will
sound after the door is closed.

AUTOMATIC DOOR LOCKS

∙ All doors lock automatically when the

vehicle

speed

reaches

15

mph

(24 km/h).

∙ All doors unlock automatically when the

transmission is placed in the P (Park)
position or when the ignition switch is
placed in the OFF position, depending
on the option selected in the “Vehicle
Settings” menu.

NOTE:

The Auto Door Unlock function can be
changed using “Vehicle Settings” of the
vehicle information display. For addi-
tional information, refer to “Vehicle in-
formation display” in the “Instruments
and controls” section of this manual.

CHILD SAFETY REAR DOOR LOCK

Child safety locks help prevent the rear
doors from being opened accidentally, es-
pecially when small children are in the ve-
hicle.

The child safety lock levers are located on
the edge of the rear doors.

When the lever is in the unlock position

䊊

2

,

the door can be opened from the outside
or the inside.

When the lever is in the LOCK position

䊊

1

,

the door can be opened only from the
outside.

LPD2309

LPD2570

3-6

Pre-driving checks and adjustments

WARNING

∙ Radio waves could adversely affect

electric medical equipment. Those
who use a pacemaker should contact
the

electric

medical

equipment

manufacturer for the possible influ-
ences before use.

∙ The Intelligent Key transmits radio

waves when the buttons are pressed.
The FAA advises the radio waves may
affect aircraft navigation and com-
munication systems. Do not operate
the Intelligent Key while on an air-
plane. Make sure the buttons are not
operated unintentionally when the
unit is stored for a flight.

∙ Never leave the Intelligent Key in the

vehicle when you leave the vehicle.

The Intelligent Key system can operate all
the door locks using the remote control
function or pushing the request switch on
the vehicle without taking the key out from
a pocket or purse. The operating environ-
ment and/or conditions may affect the In-
telligent Key system operation.

Be sure to read the following before using
the Intelligent Key system.

CAUTION

Be sure to carry the Intelligent Key with
you when operating the vehicle.

The Intelligent Key is capable of receiving
and transmitting radio waves. The Intelli-
gent Key system transmits weak radio
waves from various distances. Environ-
mental conditions may interfere with the
operation of the Intelligent Key system un-
der the following operating conditions:

∙ When operating near a location where

strong radio waves are transmitted,
such as a TV tower, power station and
broadcasting station.

∙ When in possession of wireless equip-

ment, such as a cellular telephone,
transceiver, or a CB radio.

∙ When the Intelligent Key is in contact

with or covered by metallic materials.

∙ When any type of radio wave remote

control is used nearby.

∙ When the Intelligent Key is placed near

an electric appliance such as a personal
computer.

∙ When the vehicle is parked near a park-

ing meter.

In such cases, correct the operating condi-
tions before using the Intelligent Key func-
tion or use the mechanical key.

Although the life of the battery varies de-
pending on the operating conditions, the
battery’s life is approximately two years. If
the battery is discharged, replace it with a
new one.

When the Intelligent Key battery is low, a
yellow indicator illuminates with the mes-
sage “Key Battery Low” in the vehicle infor-
mation display. For additional information,
refer to “Vehicle information display warn-
ings and indicators” in the “Instruments
and controls” section of this manual.

Since the Intelligent Key is capable of re-
ceiving radio waves, if the key is left near
equipment which transmits strong radio
waves, such as signals from a TV and per-
sonal computer, the battery life may be-
come shorter.

For additional information, refer to “Battery
replacement” in the “Do-it-yourself ” section
of this manual.

As many as four Intelligent Keys can be
registered and used with one vehicle. For
information about the purchase and use of
additional Intelligent Keys, it is recom-
mended that you visit a NISSAN dealer.

NISSAN INTELLIGENT KEY®

Pre-driving checks and adjustments

3-7

OPERATING RANGE

The Intelligent Key functions can only be
used when the Intelligent Key is within the
specified operating range from the request
switch

䊊

1

.

NOTE:

If all doors are already unlocked, opening
the trunk does NOT require an Intelligent
Key to be in range of the trunk request
switch or rear of the vehicle.

When the Intelligent Key battery is dis-
charged or strong radio waves are present
near the operating location, the Intelligent
Key operating range becomes narrower,
and the Intelligent Key may not function
properly.

The operating range is within 31.50 in
(80 cm) from each request switch

䊊

1

.

If the Intelligent Key is too close to the door
glass, handle or rear bumper, the request
switches may not function.

When the Intelligent Key is within the oper-
ating range, it is possible for anyone, even
someone who does not carry the Intelli-
gent Key, to push the request switch to
lock/unlock the doors within range.

DOOR LOCKS/UNLOCKS
PRECAUTION

∙ Do not push the door handle request

switch with the Intelligent Key held in
your hand as illustrated. The close dis-
tance to the door handle will cause the
Intelligent Key system to have difficulty
recognizing that the Intelligent Key is
outside the vehicle.

∙ After locking with the door handle re-

quest switch, verify the doors are se-
curely locked by testing them.

LPD2073

LPD2554

3-8

Pre-driving checks and adjustments

∙ To prevent the Intelligent Key from be-

ing left inside the vehicle, make sure you
carry the Intelligent Key with you and
then lock the doors.

∙ Do not pull the door handle before

pushing

the

door

handle

request

switch. The door will be unlocked but
will not open. Release the door handle
once and pull it again to open the door.

NISSAN INTELLIGENT KEY®
OPERATION

You can lock or unlock the doors without
taking the Intelligent Key out of your pocket
or bag.

When you carry the Intelligent Key with you,
you can lock or unlock all doors by pushing
the door handle request switch within the
range of operation.

Locking doors

1. Move the shift lever to the P (Park) posi-

tion, place the ignition switch in the
LOCK position and make sure you carry
the Intelligent Key with you.

2. Close driver’s door.

3. Push any door handle request switch

while carrying the Intelligent Key with
you.

4. All doors will lock.

5. The hazard warning lights flash twice, a

chime sounds twice, and the front and
tail lights may turn on for 10 seconds.

LPD2399

LPD2347

Pre-driving checks and adjustments

3-9

NOTE:

∙ Request switches for all doors can be

deactivated

when

the

Ext.

Door

Switch feature is switched to OFF us-
ing the “Vehicle Settings” menu on
the vehicle information display. For
additional information, refer to “Ve-
hicle information display” in the “In-
struments and controls” section of
this manual.

∙ Doors lock with the door handle re-

quest switch

䊊

1

while the ignition

switch is not in the LOCK position.

∙ Doors do not lock by pushing the door

handle request switch while the driv-
er’s door is open. However, the driver
door locks with the mechanical key
even if any door is open.

∙ Doors do not lock with the door

handle request switch with the Intel-
ligent Key inside the vehicle and a
beep sounds to warn you. However,
when an Intelligent Key is inside the
vehicle, doors can be locked with an-
other Intelligent Key.

CAUTION

∙ After locking the doors using the re-

quest switch, make sure that the
doors have been securely locked by
operating the door handles.

∙ When locking the doors using the re-

quest switch, make sure to have the
Intelligent Key in your possession be-
fore operating the request switch to
prevent the Intelligent Key from being
left in the vehicle.

∙ The request switch is operational only

when the Intelligent Key has been de-
tected by the Intelligent Key system.

Lockout protection

To prevent the Intelligent Key from being
accidentally locked in the vehicle, lockout
protection is equipped with the Intelligent
Key system.
When any door is open, the doors are
locked, and then the Intelligent Key is put
inside the vehicle and all the doors are
closed; a chime will sound and the lock will
automatically unlock.

NOTE:

The doors may not lock when the Intelli-
gent Key is in the same hand that is op-
erating the request switch to lock the
door. Put the Intelligent Key in a purse,
pocket or your other hand.

CAUTION

The lockout protection may not func-
tion under the following conditions:

∙ When the Intelligent Key is placed on

top of the instrument panel.

∙ When the Intelligent Key is placed in-

side the glove box or a storage bin.

∙ When the Intelligent Key is placed in-

side the door pockets.

∙ When the Intelligent Key is placed in-

side or near metallic materials.

WPD0369

3-10

Pre-driving checks and adjustments

Unlocking doors

1. Carry the Intelligent Key.

2. Push the door handle request switch.

3. The door on which the request switch

was pressed will unlock and the hazard
warning lights flash once, the outside
buzzer sounds once, the hazard warn-
ing lights flash once and the front and
tail lights may turn on for 30 seconds.

4. Push the door handle request switch

again within one minute, the outside
buzzer sounds once and the remaining
doors unlock.

NOTE:

∙ If the “Selective Unlock” feature is

switched to OFF using the “Vehicle
Settings” menu, all doors will unlock
upon the first request switch

䊊

1

press.

∙ Request switches for all doors can be

deactivated

when

the

Ext.

Door

Switch feature is switched to OFF us-
ing the “Vehicle Settings” menu on
the vehicle information display. For
additional information, refer to “Ve-
hicle information display” in the “In-
struments and controls” section of
this manual.

If a door handle is pulled while unlocking
the doors, that door may not be unlocked.
Returning the door handle to its original
position will unlock the door. If the door
does not unlock after returning the door
handle, push the door handle request
switch to unlock the door.

All doors will be locked automatically un-
less one of the following operations is per-
formed within one minute after pushing
the request switch.

∙ Opening any door.

∙ Pushing the ignition switch.

The interior light timer illuminates for a pe-
riod of time when a door is unlocked and
the interior light switch is in the ON posi-
tion.

The interior light can be turned off without
waiting by performing one of the following
operations:

∙ Placing the ignition switch in the ON po-

sition.

∙ Locking the doors with the remote con-

trol.

∙ Switching the interior light switch to the

OFF position.

LPD2347

LPD2165

Pre-driving checks and adjustments

3-11

∙ Switching the Auto Room Lamp feature

to the OFF position in the “Vehicle Set-
tings” menu on the vehicle information
display. For additional information, refer
to “Vehicle information display” in the
“Instruments and controls” section of
this manual.

Opening the trunk lid

1. Push the trunk opener request switch

䊊

A

for more than 1 second while carry-

ing the Intelligent Key with you.

2. The trunk will unlatch. A chime will

sound four times.

3. Raise the trunk lid to open the trunk.

Lockout protection

To prevent the Intelligent Key from being
accidentally locked in the trunk, lockout
protection is equipped with the Intelligent
Key.

When all doors are locked and the trunk lid
is closed with the Intelligent Key inside the
trunk, the outside buzzer will sound and the
trunk will open.

LPD2968

3-12

Pre-driving checks and adjustments

HOW TO USE THE REMOTE
KEYLESS ENTRY FUNCTION

1.

(remote engine start) button

2.

(lock) button

3.

(unlock) button

4.

(trunk) button

5.

(panic) button

The remote keyless entry function can op-
erate all door locks using the remote key-
less function of the Intelligent Key. The re-
mote keyless function can operate at a
distance of 33 ft (10 m) away from the ve-

hicle. The operating distance depends
upon the conditions around the vehicle.

The remote keyless entry function will not
function under the following conditions:

∙ When the Intelligent Key is not within the

operational range.

∙ When the Intelligent Key battery is dis-

charged.

CAUTION

When locking the doors using the Intel-
ligent Key, be sure not to leave the key in
the vehicle.

Locking doors

1. Place the ignition switch in the LOCK

position.

2. Close all doors.

3. Press the

button on the Intelli-

gent Key.

4. The hazard indicator lights flash twice

and the horn beeps once.

5. All doors will be locked.

CAUTION

After locking the doors using the Intel-
ligent Key, be sure that the doors have
been securely locked by operating the
door handles.

Unlocking doors

1. Press the

button on the Intelligent

Key.

2. The hazard warning lights flash once

and the driver’s door will unlock.

3. Press the

button again within

1 minute to unlock all doors and trunk.

NOTE:

The

Selective

Unlock

feature

can

be

changed using the “Vehicle Settings” menu
on the vehicle information display. For addi-
tional information, refer to “Vehicle infor-
mation display” in the “Instruments and
controls” section of this manual.
All doors will be locked automatically un-
less one of the following operations is per-
formed within 1 minute after pressing
the

button:

∙ Opening any doors.

∙ Pushing the ignition switch.

LPD3603

Pre-driving checks and adjustments

3-13

The interior light illuminates for a period of
time when a door is unlocked and the inte-
rior light switch is not in the OFF position.

The light can be turned off without waiting
by performing one of the following opera-
tions:

∙ Placing the ignition switch in the ON po-

sition.

∙ Locking the doors with the Intelligent

Key.

∙ Switching the interior light switch to the

OFF position. For additional informa-
tion, refer to “Interior lights” in the “In-
struments and controls” section of this
manual.

∙ Switching the Auto Room Lamp feature

to the OFF position in the “Vehicle Set-
tings” menu on the vehicle information
display. For additional information, refer
to “Vehicle information display” in the
“Instruments and controls” section of
this manual.

Opening windows

The Intelligent Key allows you to simultane-
ously open windows equipped with auto-
matic operation.

∙ To open the windows, press the

button on the Intelligent Key longer
than 3 seconds after all doors are un-
locked.

The door windows cannot be closed by
using the Intelligent Key.

Releasing the trunk lid

Press the

button for longer than

0.5 seconds to open the trunk lid. The trunk
release button will not operate when the
ignition switch is placed in the ON position.

Using the panic alarm

If you are near your vehicle and feel threat-
ened, you may activate the panic alarm to
call attention by pressing and holding
the

button on the Intelligent Key for

longer than 0.5 seconds.
The panic alarm and headlights will stay on
for a period of time.

The panic alarm stops when:

∙ It has run for a period of time, or

∙ Any button is pressed on the Intelligent

Key.

∙ The request switch on the driver or pas-

senger door is pushed and the Intelli-
gent Key is in range of the door handle.

Answer back horn feature

If desired, the answer back horn feature
can be deactivated using the Intelligent
Key. When it is deactivated and the
button is pressed, the hazard indicator
lights flash twice. When the

button is

pressed, neither the hazard indicator lights
nor the horn operates.

NOTE:

If you change the Answer Back Horn fea-
ture with the Intelligent Key, the vehicle
information display screen will show the
current mode after the ignition switch
has been cycled from the OFF to the ON
position. The vehicle information display
screen can also be used to change the
answer back horn mode.
For additional information, refer to “Ve-
hicle settings” in the “Instruments and
controls” section of this manual.
To deactivate:

Press and hold the

and

but-

tons for at least 2 seconds. The hazard
indicator lights will flash three times to con-
firm that the answer back horn feature has
been deactivated.

3-14

Pre-driving checks and adjustments

To activate:

Press and hold the

and

but-

tons for at least 2 seconds once more.
The hazard indicator lights will flash once
and the horn will sound once to confirm
that the horn beep feature has been reac-
tivated.
Deactivating the horn beep feature does
not silence the horn if the alarm is trig-
gered.

Intelligent Key button operation
light

The light blinks only when you press any
button on the Intelligent Key. The light illu-
mination only signifies that the key fob has
transmitted a signal. You may look and/or
listen to verify that the vehicle has per-
formed the intended operation. The num-
ber of blinks identifies each registered key
(i.e. 1 blink = 1st key,...,4 blinks = 4th key) for
your own identification purposes.

If the light does not blink, your battery may
be too weak to communicate to the ve-
hicle. If this occurs, the battery may need to
be replaced. For additional information re-
garding the replacement of a battery, refer
to “Battery replacement” in the “Do-it-
yourself ” section of this manual.

WARNING SIGNALS

To help prevent the vehicle from moving
unexpectedly by erroneous operation of
the Intelligent Key or to help prevent the
vehicle from being stolen, a chime or
buzzer sounds from inside and outside the
vehicle and a warning is displayed in the
instrument panel.

When a chime or beep sounds or a warning
is displayed, be sure to check the vehicle
and the Intelligent Key.

For

additional

information,

refer

to

“Troubleshooting guide” in this section and
“Vehicle information display” in the “Instru-
ments and controls” section of this manual.

LPD2836

Pre-driving checks and adjustments

3-15

TROUBLESHOOTING GUIDE

Verify the location of all Intelligent Keys that
are programmed for the vehicle. If another
Intelligent Key is in range or inside the ve-
hicle, the vehicle system may respond dif-
ferently than expected.

Symptom

Possible Cause

Remedy

When pushing the ignition switch to
stop the engine

The Shift to Park warning appears on
the vehicle information display and the
inside warning chime sounds
continuously.

The shift lever is not in the P (Park)
position.

Move the shift lever to the P (Park)
position.

When opening the driver’s door to get
out of the vehicle

The Door/Trunk Open warning ap-
pears on the display and the inside
warning chime sounds continuously.

The ignition switch is in the ACC
position.

Place the ignition switch in the ON po-
sition or close the driver’s door.

When closing the door after getting
out of the vehicle

The No Key Detected warning appears
on the vehicle information display, the
outside chime sounds three times and
the inside warning chime sounds for
approximately three seconds.

The Intelligent Key is not detected in-
side of the vehicle.

Place the ignition switch in the OFF
position.

The Rear Door Alert warning message
appears on the display, the horn
sounds three times twice, or a Check
Back Seat For Articles warning ap-
pears on the display.

The Rear Door Alert is activated

Check the back seat for all articles,
press the ENTER button to clear the
Rear Door Alert warning message.

The Shift to Park warning appears on
the vehicle information display and the
inside and outside chimes sound
continuously.

The ignition switch is in the ACC or
OFF position and the shift lever is not
in the P (Park) position.

Carry the Intelligent Key with you

3-16

Pre-driving checks and adjustments

Symptom

Possible Cause

Remedy

When closing the door with the inside
lock knob turned to LOCK

The outside chime sounds for approxi-
mately three seconds and all the
doors unlock.

The Intelligent Key is inside the vehicle.

Carry the Intelligent Key with you.

When pushing the door handle re-
quest switch or the LOCK button on
the Intelligent Key to lock the door

The outside chime sounds for approxi-
mately three seconds.

The Intelligent Key is inside the vehicle.

Carry the Intelligent Key with you.

When pushing the ignition switch to
start the engine

The Key Battery Low indicator appears
on the display.

The battery charge is low.

Replace the battery with a new one.
For additional information, refer to
“Battery replacement” in the “Do-it-
yourself ” section of this manual.

The Key ID Incorrect warning appears
on the vehicle information display.

The Intelligent Key is not detected in-
side of the vehicle.

Carry the registered Intelligent Key
with you.

When closing the trunk lid

The outside chime sounds for approxi-
mately 10 seconds and the trunk lid
opens.

The Intelligent Key is inside the trunk.

Carry the Intelligent Key with you.

Pre-driving checks and adjustments

3-17