Nissan Teana J32. Manual — part 1278
HEADLAMP WASHER NOZZLE AND TUBE
WW-97
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
ON-VEHICLE REPAIR
HEADLAMP WASHER NOZZLE AND TUBE
Exploded View
INFOID:0000000003761621
Hydraulic Layout
INFOID:0000000003761622
Removal and Installation
INFOID:0000000003761623
REMOVAL
1.
Headlamp washer nozzle cover
2.
Headlamp washer nozzle assembly
JPLIA1130ZZ
1.
Headlamp washer nozzle assembly
(LH)
2.
Headlamp washer tube
3.
Headlamp washer nozzle assembly
(RH)
A.
Headlamp washer tube joint
: Clip
JPLIA1131ZZ
WW-98
< ON-VEHICLE REPAIR >
HEADLAMP WASHER NOZZLE AND TUBE
1.
Push pawl (A), and remove the headlamp washer nozzle cover
(1).
2.
Remove the front bumper fascia. Refer to
.
3.
Disconnect the headlamp washer tube from the headlamp
washer nozzle assembly.
4.
Remove the headlamp washer nozzle mounting bolt.
5.
Remove the headlamp washer nozzle assembly from the front
bumper fascia.
INSTALLATION
Install in the reverse order of removal.
Inspection
INFOID:0000000003761624
HEADLAMP WASHER NOZZLE SPRAY POSITION INSPECTION
Check that the headlamp washer injection is certainly on the head-
lamp illuminating area. If the injection is out of the area, check the
headlamp washer tube and headlamp washer nozzle leakages.
JPLIA1132ZZ
JPLIA1133ZZ
WASHER TANK
WW-99
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WASHER TANK
Exploded View
INFOID:0000000003761625
Removal and Installation
INFOID:0000000003761626
REMOVAL
1.
Pull out the washer tank inlet from the washer tank.
2.
Remove the front bumper fascia. Refer to
3.
Disconnect the washer pump connector.
4.
Disconnect the headlamp washer pump connector.
5.
Disconnect the washer tube.
6.
Disconnect the headlamp washer tube.
7.
Remove the washer tank mounting bolts.
8.
Remove the washer tank from the vehicle.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Add water up to the top of the washer tank inlet after installing. Check that there is no leakage.
1.
Washer tank inlet
2.
Washer tank
JPLIA1134ZZ
WW-100
< ON-VEHICLE REPAIR >
WASHER PUMP
WASHER PUMP
Exploded View
INFOID:0000000003761627
Removal and Installation
INFOID:0000000003761628
REMOVAL
1.
Remove the fender protector RH (front). Refer to
EXT-22, "FENDER PROTECTOR : Exploded View"
.
2.
Disconnect the washer pump connector.
3.
Disconnect the washer tube.
4.
Remove the washer pump from the washer tank.
5.
Remove the packing from the washer tank.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Never twist the packing when installing the washer pump.
1.
Washer tank
2.
Washer tube
3.
Washer pump
4.
Washer pump connector
5.
Packing
: Vehicle front
JPLIA1135ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст