Nissan Teana J32. Manual — part 1229
VTL-102
< ON-VEHICLE REPAIR >
[WITH 7 INCH DISPLAY]
HEATER CORE
Removal and Installation
INFOID:0000000003894516
REMOVAL
1.
Remove heater & cooling unit assembly. Refer to
.
2.
Remove mounting screws (A), and then remove foot duct (left)
(1).
3.
Remove heater pipe grommet (1).
4.
Remove mounting screw (A), and then remove heater pipe sup-
port (2).
5.
Remove mounting screws (B), and then remove heater pipe
cover (3).
6.
Slide heater core (1) to leftward (as shown in the figure).
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply compressor oil to them when installing.
• Check for refrigerant leakage when charging refrigerant.
NOTE:
• Refer to
when filling radiator with engine coolant.
• Charge the refrigerant.
37. Defroster door link
38.
Foot door link
39.
Max. cool door lever
40. Foot door lever
41.
Defroster door lever
42.
Adapter case
43. Distributor lower case
44.
Ventilator door
45.
Intake sensor
46. Intake sensor bracket
47.
Foot door
48.
Max. cool door
49. Defroster door
50.
Air mix door (Slide door)
for symbols in the figure.
JPIIA0925ZZ
JPIIA0926ZZ
JPIIA0927ZZ
DUCT AND GRILLE
VTL-103
< ON-VEHICLE REPAIR >
[WITH 7 INCH DISPLAY]
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
DUCT AND GRILLE
CENTER VENTILATOR GRILLE
CENTER VENTILATOR GRILLE : Exploded View
INFOID:0000000003894517
CENTER VENTILATOR GRILLE : Removal and Installation
INFOID:0000000003894518
REMOVAL
1.
Remove cluster lid D. Refer to
.
2.
Disengage the pawls, and then remove center ventilator grilles
(left and right) (1).
INSTALLATION
Installation is basically the reverse order of removal.
SIDE VENTILATOR GRILLE
1.
Side defroster nozzle (right)
2.
Defroster nozzle
3.
Side defroster nozzle (left)
4.
Ventilator duct
5.
Side defroster grille (left)
6.
Instrument panel assembly
7.
Side ventilator grille (left)
8.
Center ventilator grille (left)
9.
Cluster lid D
10. Center ventilator grille (right)
11. Side ventilator grille (right)
12. Side defroster grille (right)
JPIIA0928ZZ
: Pawl
JPIIA0929ZZ
VTL-104
< ON-VEHICLE REPAIR >
[WITH 7 INCH DISPLAY]
DUCT AND GRILLE
SIDE VENTILATOR GRILLE : Exploded View
INFOID:0000000003894519
SIDE VENTILATOR GRILLE : Removal and Installation
INFOID:0000000003894520
REMOVAL
1.
Remove ventilator duct. Refer to
VTL-106, "VENTILATOR DUCT : Exploded View"
.
2.
Disengage the pawls, and then remove side ventilator grilles
(left and right) (1).
INSTALLATION
Installation is basically the reverse order of removal.
SIDE DEFROSTER GRILLE
1.
Side defroster nozzle (right)
2.
Defroster nozzle
3.
Side defroster nozzle (left)
4.
Ventilator duct
5.
Side defroster grille (left)
6.
Instrument panel assembly
7.
Side ventilator grille (left)
8.
Center ventilator grille (left)
9.
Cluster lid D
10. Center ventilator grille (right)
11. Side ventilator grille (right)
12. Side defroster grille (right)
JPIIA0928ZZ
: Pawl
JPIIA0930ZZ
DUCT AND GRILLE
VTL-105
< ON-VEHICLE REPAIR >
[WITH 7 INCH DISPLAY]
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
SIDE DEFROSTER GRILLE : Exploded View
INFOID:0000000003894521
SIDE DEFROSTER GRILLE : Removal and Installation
INFOID:0000000003894522
REMOVAL
1.
Remove side defroster nozzles (left and right). Refer to
VTL-107, "SIDE DEFROSTER NOZZLE :
.
2.
Remove mounting screws (A), and then remove side defroster
grilles (left and right) (1).
INSTALLATION
Installation is basically the reverse order of removal.
VENTILATOR DUCT
1.
Side defroster nozzle (right)
2.
Defroster nozzle
3.
Side defroster nozzle (left)
4.
Ventilator duct
5.
Side defroster grille (left)
6.
Instrument panel assembly
7.
Side ventilator grille (left)
8.
Center ventilator grille (left)
9.
Cluster lid D
10. Center ventilator grille (right)
11. Side ventilator grille (right)
12. Side defroster grille (right)
JPIIA0928ZZ
JPIIA0931ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст