Nissan Teana J32. Manual — part 991
FRONT SEAT
SE-97
< ON-VEHICLE REPAIR >
[WITH VENTILATION SEAT]
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Remove the screws (C), and then remove seat cushion duct A
(1) and B (2).
2.
Remove the clip, seatback duct B and C.
Remove the nuts (A), and then remove clip (1), seatback duct B
(2) and C (3).
3.
Remove the seatback duct A.
4.
Remove the ventilation motor.
• Disconnect the harness connector (A).
• Remove the screws (B), and then remove ventilation motor
(1).
5.
Remove the ventilation seat control unit.
• Disconnect the harness connectors (A).
• Remove the screws (B), and then remove ventilation seat con-
trol unit (1).
Assembly
Assemble in the reverse order of disassembly.
JMJIA1875ZZ
JMJIA1876ZZ
JMJIA1877ZZ
JMJIA1878ZZ
SE-98
< ON-VEHICLE REPAIR >
[WITH VENTILATION SEAT]
REAR SEAT
REAR SEAT
Exploded View
INFOID:0000000003809278
1.
Seat harness
2.
Cup holder
3.
Bushing
4.
Armrest bracket
5.
Armrest assembly
6.
Seat heater switch RH
7.
Air conditioning switch RH
8.
Rear sunshade switch
9.
Air conditioning switch LH
JMJIA1883GB
REAR SEAT
SE-99
< ON-VEHICLE REPAIR >
[WITH VENTILATION SEAT]
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
Removal and Installation
INFOID:0000000003809279
REMOVAL
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.
Remove the headrest.
2.
Remove the seat cushion.
• Pull the lock lever (1) at the front bottom of the seat cushion
forward (1 for each side), and pull the seat cushion upward to
release the wire (2) from the seat cushion hook. Then pull the
seat cushion forward to remove.
• Disconnect the harness connectors (A).
• Remove the seat cushion from the vehicle.
3.
Remove the seatback.
• Remove the bolts under seatback.
• Disconnect the harness connectors (A).
10. Seat heater switch LH
11.
Rear audio switch
12. Ventilation motor (seat cushion)
13. Blower filter
14. Seat cushion duct A
15. Seat cushion duct B
16. Seat cushion hook
17. Seat cushion pad
18. Seat cushion trim
19. Seatback center pad
20. Seat cushion heater unit
21. Seatback heater unit
22. Seatback pad
23. Seatback trim
24. Seat belt hook
25. Headrest holder (locked)
26. Headrest holder (free)
27. Headrest side (long type)
28. Headrest side (normal type)
29. Headrest center (normal type)
30. Headrest center (long type)
31
Seatback duct C
32. Seatback duct B
33. Ventilation motor (seatback)
34. Blower filter
35. Seatback duct A
36. Ventilation seat control unit
Refer to
JMJIA0251ZZ
JMJIA1934ZZ
JMJIA1935ZZ
SE-100
< ON-VEHICLE REPAIR >
[WITH VENTILATION SEAT]
REAR SEAT
• Lift up seatback from underneath, and then remove seatback from seatback hook that is fixed to the
vehicle.
• Remove the seatback from the vehicle.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
Disassembly and Assembly
INFOID:0000000003809280
SEATBACK
Disassembly
1.
Remove armrest assembly.
• Remove the screws (A) and pawls.
• Disconnect the connectors, and then remove cup holder (1).
• Remove the bolts (A), and then remove armrest retainer.
• Remove the harness clamp in the armrest and pull out seat harness.
• Remove the armrest assembly.
2.
Remove the seatback trim.
• Remove the screws, and then seat belt hook.
: Pawl
JMJIA1937ZZ
JMJIA1938ZZ
JMJIA1939ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст