Nissan Teana J32. Manual — part 310
INTELLIGENT KEY SYSTEM
DLK-23
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
TRUNK OPEN FUNCTION : Component Parts Location
INFOID:0000000003841721
1.
BCM M118, M119, M120, M121,
M122, M123
2.
TCM F23
3.
IPDM E/R E10, E11
4.
Intelligent Key warning buzzer E25
5.
Remote keyless entry receiver M78
6.
Combination meter M34
7.
Key slot M99
8.
Control device (detention switch)
M57
9.
Inside key antenna (console) M262
JMKIA2375ZZ
DLK-24
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
TRUNK OPEN FUNCTION : Component Description
INFOID:0000000003794749
REMOTE KEYLESS ENTRY FUNCTION
10. Inside key antenna (instrument cen-
ter) M105
11.
Inside key antenna (trunk room) B86 12. Outside key antenna (rear bumper)
D85
13. Front outside handle LH (request
switch) D11
14. Front outside handle LH
(outside key antenna) D12
15. Trunk lid lock assembly
(trunk lid opener actuator) T5
16. Front door switch (driver side) B34
A.
Behind the combination meter
B.
Engine room (LH)
C.
Behind the instrument lower panel
RH
D.
Behind the center console
E.
Behind the audio unit
F.
View with rear bumper removed
1.
Front door lock assembly (driver
side) D9
2.
Rear door lock assembly LH D85
3.
Trunk lid opener request switch T6
A.
View with front door finisher removed B.
View with rear door finisher removed C.
View with trunk lid
JMKIA2376ZZ
Item
Function
BCM
Controls the trunk lid opener function and room lamp function.
Trunk lid opener switch
Inputs press/degrees signal to BCM.
Door lock actuator
Receives lock/unlock signal from BCM and locks/unlocks each door.
Door switch
Inputs door open/close condition to BCM.
Remote keyless entry receiver
Receives lock/unlock signal from the Intelligent Key, and then transmits to BCM.
Trunk lid opener request switch
Inputs lock/unlock operation to BCM.
Intelligent Key
Transmits button operation to remote keyless entry receiver.
Outside key antenna (rear bumper)
Detects if Intelligent Key is outside the vehicle.
Inside key antenna
Detects if Intelligent Key is inside the vehicle.
Intelligent Key warning buzzer
Warns the user of the trunk lid opener/close condition and inappropriate operations with the
buzzer sound.
INTELLIGENT KEY SYSTEM
DLK-25
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REMOTE KEYLESS ENTRY FUNCTION : System Diagram
INFOID:0000000003794750
REMOTE KEYLESS ENTRY FUNCTION : System Description
INFOID:0000000003794751
The Intelligent Key has the same functions as the remote control entry system. Therefore, it can be used in the
same manner as the remote controller by operating the door lock/unlock button.
OPERATION
Remote keyless entry system controls operation of the following items
• Door lock/unlock
• Trunk lid open
• Hazard and horn reminder
• Auto door lock
OPERATION AREA
To ensure the Intelligent Key works effectively, use within 1 m (3 ft) range of each door, however the operable
range may differ according to surroundings.
DOOR LOCK/UNLOCK FUNCTION
• When door lock/unlock button of the Intelligent Key is pressed, lock signal or unlock signal is transmitted
from Intelligent Key to BCM via remote keyless entry receiver.
• When BCM receives the door lock/unlock signal, it operates door lock actuator, blinks the hazard lamp (lock:
2 time, unlock: 1 times) and inputs horn chirp signal to IPDM E/R at the same time as a reminder.
• IPDM E/R honks horn (lock: 2 time) as a reminder
OPERATION CONDITION
TRUNK LID OPENER FUNCTION
When trunk lid button of Intelligent Key is pressed for more than 1 second, trunk lid open. For a detailed
description, refer to
DLK-21, "TRUNK OPEN FUNCTION : System Description"
HAZARD AND HORN REMINDER FUNCTION
When doors are locked or unlocked by Intelligent Key, BCM blinks hazard warning lamps as a reminder.
The hazard and horn reminder has a horn chirp mode (C mode) and a non-horn chirp mode (S mode).
Operating Function of Hazard and Horn Reminder
JMKIA2480GB
Remote controller operation
Operation condition
Operation
Lock
All doors closed
All doors lock
Unlock
Intelligent Key is out of key slot
All doors unlock
DLK-26
< FUNCTION DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
INTELLIGENT KEY SYSTEM
Hazard and horn reminder does not operate if any door switch is ON (any door is OPEN).
How to Change Hazard and Horn Reminder Mode
With CONSULT-III
SEC-22, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Without CONSULT-III
When LOCK and UNLOCK signals are sent from the Intelligent Key for more than 2 seconds at the same time,
the hazard and horn reminder mode is changed and hazard warning lamp blinks and horn sounds as follows:
AUTO DOOR LOCK FUNCTION
When all doors are locked, ignition switch is OFF (ignition switch is not pressed) and key switch is OFF (Intel-
ligent Key is not inserted in key slot), doors are unlocked with Intelligent Key button. When BCM does not
receive the following signals within 30 seconds, all doors are locked.
• Door switch is ON (door is opened)
• Door is locked
• Ignition switch is ON
• Key switch is ON (Intelligent Key is inserted in key slot)
Auto door lock mode can be changed by “AUTO LOCK SET” mode in “WORK SUPPORT”. Refer to
"INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
LIST OF OPERATION RELATED PARTS
The operation related parts are marked with
×
.
C mode
S mode
Intelligent Key operation
Lock
Unlock
Lock
Unlock
Hazard warning lamp flash
Twice
Once
Twice
—
Horn sound
Once
—
—
—
JMKIA2755GB
Remote keyless entry functions
Int
e
llig
en
t Ke
y
Ke
y sl
ot
Do
or re
qu
es
t s
w
it
c
h
Doo
r swi
tch
Doo
r lo
ck
ac
tu
at
or
CAN communication system
BCM
Com
b
in
at
ion
m
e
te
r
Hazard warning lamp
Horn
IPDM
E/R
Door lock/unlock function by remote control button
×
×
×
×
×
×
Hazard and horn reminder function
×
×
×
×
×
×
×
Auto door lock function
×
×
×
×
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст