Nissan Teana J32. Manual — part 1108
STC-1
STEERING
C
D
E
F
H
I
J
K
L
M
SECTION
STC
A
B
STC
N
O
P
CONTENTS
STEERING CONTROL SYSTEM
BASIC INSPECTION . . . . . . . . .
DIAGNOSIS AND REPAIR WORK FLOW . . .
Work Flow . . . . . . . . . . . . . . . .....
FUNCTION DIAGNOSIS . . . . . . . ...
EPS SYSTEM . . . . . . . . . . . . . ..
System Diagram . . . . . . . . . . . . . ....
System Description . . . . . . . . . . . . ...
Component Parts Location . . . . . . . . . ....
Component Description . . . . . . . . . . .....
COMPONENT DIAGNOSIS . . . . . . ..
POWER SUPPLY AND GROUND CIRCUIT . ...
Description . . . . . . . . . . . . . . . ....
Diagnosis Procedure . . . . . . . . . . . .....
POWER STEERING SOLENOID VALVE . . ...
Description . . . . . . . . . . . . . . . ....
Diagnosis Procedure . . . . . . . . . . . .....
Component Inspection . . . . . . . . . . . ..
ENGINE SPEED SIGNAL CIRCUIT . . . . .
Description . . . . . . . . . . . . . . . ....
Diagnosis Procedure . . . . . . . . . . . .....
VEHICLE SPEED SIGNAL CIRCUIT . . . . .
Description . . . . . . . . . . . . . . . ..
Diagnosis Procedure . . . . . . . . . . . ...
ECU DIAGNOSIS . . . . . . . . . . .
POWER STEERING CONTROL UNIT . . . ..
Reference Value . . . . . . . . . . . . . ..
Wiring Diagram - ELECTRONICALLY CON-
TROLLED POWER STEERING SYSTEM - . . .
Fail-Safe . . . . . . . . . . . . . . . . ..
SYMPTOM DIAGNOSIS . . . . . . . ..
UNBALANCE STEERING WHEEL TURNING
FORCE (TORQUE VARIATION) . . . . . ...
Description . . . . . . . . . . . . . . . ...
Diagnosis Procedure . . . . . . . . . . . ...
PRECAUTION . . . . . . . . . . . ..
PRECAUTIONS . . . . . . . . . . . . .
Precaution Necessary for Steering Wheel Rota-
tion after Battery Disconnect . . . . . . . . ...
ON-VEHICLE REPAIR . . . . . . . . .
POWER STEERING CONTROL UNIT . . . ..
Exploded View . . . . . . . . . . . . . . .
STC-2
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORK FLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
INFOID:0000000003893521
DETAILED FLOW
1.
COLLECT THE INFORMATION FROM THE CUSTOMER
It is also important to clarify customer complaints before inspection. First of all, reproduce symptoms and
understand them fully. Ask customer about his/her complaints carefully. In some cases, it is necessary to
check symptoms by driving vehicle with customer.
CAUTION:
Customers are not professional. It is dangerous to make an easy guess like “maybe the customer
means that...,” or “maybe the customer mentions this symptom”.
>> GO TO 2.
2.
CHECK THE STATUS
1.
Check the power steering fluid leakage and power steering fluid level. Refer to
2.
Check the drive belt tension. Refer to
.
3.
Check the power steering gear for damages, cracks and fluid leakage. Refer to
4.
Check the relief oil pressure. Refer to
>> GO TO 3.
3.
DIAGNOSIS CHART BY SYMPTOM
Perform the diagnosis by symptom. Refer to
>> GO TO 4.
4.
FINAL CHECK
Check the input/output standard values for the power steering control unit.
Are the power steering control unit input/output values within standard ranges respectively?
YES
>> INSPECTION END
NO
>> GO TO 2.
EPS SYSTEM
STC-3
< FUNCTION DIAGNOSIS >
C
D
E
F
H
I
J
K
L
M
A
B
STC
N
O
P
FUNCTION DIAGNOSIS
EPS SYSTEM
System Diagram
INFOID:0000000003893522
CONTROL DIAGRAM
CROSS-SECTIONAL VIEW
System Description
INFOID:0000000003893523
• The EPS system controls the power steering solenoid valve through the power steering control unit.
JSGIA0119GB
1.
Combination meter
2.
Power steering control unit
3.
Power steering solenoid valve
4.
Steering gear assembly
5.
Gear housing assembly
6.
Gear sub-assembly
7.
Pinion
8.
Power steering oil pump
9.
Reservoir tank
JSGIA0376ZZ
STC-4
< FUNCTION DIAGNOSIS >
EPS SYSTEM
• The valve driving voltage to control the power steering solenoid
valve varies according to the vehicle speed.
OPERATION PRINCIPLE
During Parking (When Turning The Steering Wheel To The Right.)
1.
Power steering solenoid valve is closed while a vehicle is stopped.
2.
Pinion “1R”, “2R” and “3R” are closed depending on steering torque of steering wheel.
3.
Oil pressure “P” in the gear housing assembly is the sum of oil pressures occurred in “2R” and “3R”. This
results in a light steering force because of high pressure.
During High-speed Operation
1.
Power steering solenoid valve is opened during high-speed operation.
2.
Pinion “1R”, “2R” and “3R” are closed depending on steering torque of steering wheel.
3.
Oil pressure “2R” does not occur because the power steering solenoid valve is on full throttle.
4.
Oil pressure “P” in the gear housing assembly includes only oil pressure occurred in “3R” and results in a
heavy steering force.
JSGIA0374GB
JSGIA0020GB
JSGIA0021GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст