Nissan Tiida C11. Manual — part 184
DLK-146
< COMPONENT DIAGNOSIS >
[WITH I-KEY, WITHOUT SUPER LOCK]
KEY WARNING LAMP
KEY WARNING LAMP
Description
INFOID:0000000001396621
Performs operation method guide and warning together with buzzer.
Component Function Check
INFOID:0000000001396622
1.
CHECK FUNCTION
With CONSULT-III
Check the operation with “INDICATOR” in “Active Test” mode.
Is the inspection result normal?
Yes
>> Key warning lamp in combination meter is OK.
No
>> Refer to
DLK-146, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000001396623
1.
CHECK KEY WARNING LAMP CIRCUIT
Refer to
XX-XX, "*****"
.
Is the inspection result normal?
Yes
>> GO TO 2.
No
>> Repair or replace key warning lamp circuit.
2.
CHECK INTERMITTENT INCIDENT
Refer to @@@.
>> INSPECTION END
Test item
Condition
INDICATOR
:BLUE ON
Key warning lamp (green) illuminates
:RED ON
Key warning lamp (red) illuminates
:BLUE IND
Key warning lamp (green) flashes
:RED IND
Key warning lamp (red) flashes
LOCK WARNING LAMP
DLK-147
< COMPONENT DIAGNOSIS >
[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
LOCK WARNING LAMP
Description
INFOID:0000000001396624
Performs operation method guide and warning together with buzzer.
Component Function Check
INFOID:0000000001396625
1.
CHECK FUNCTION
With CONSULT-III
Check the operation with “INDICATOR” in “Active Test” mode.
Is the inspection result normal?
Yes
>> Lock warning lamp in combination meter is OK.
No
>> Refer to
DLK-147, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000001396626
1.
CHECK COMBINATION METER OPERATION
Check the operation of the combination meter.
Does the combination meter operate normally?
Yes
>> GO TO 2.
No
>> Refer to
.
2.
CHECK LOCK WARNING LAMP CIRCUIT
1.
Engage the parking brake.
2.
Turn ignition switch ON.
3.
Depress the brake pedal and take the shift lever out of park.
4.
With the shift lever out of park, attempt to turn ignition switch to the LOCK position.
Does the "LOCK" indicator illuminate?
Yes
>> GO TO 3.
No
>> Refer to
in combination meter to diagnose the park/neutral position indicator
circuit.
3.
CHECK INTERMITTENT INCIDENT
Refer to @@@.
>> INSPECTION END
Test item
Condition
INDICATOR
:KNOB ON
Lock warning lamp illuminates
:KNOB IND
Lock warning lamp flashes
DLK-148
< COMPONENT DIAGNOSIS >
[WITH I-KEY, WITHOUT SUPER LOCK]
HAZARD WARNING LAMPS
HAZARD WARNING LAMPS
Description
INFOID:0000000001396627
Performs answer-back for each operation with the number of blinks.
Component Function Check
INFOID:0000000001396628
1.
CHECK FUNCTION
With CONSULT-III
Check hazard warning lamp “FLASHER” in “Active Test” mode.
Is the inspection result normal?
YES
>> Hazard warning lamp circuit is OK.
NO
>> Refer to
DLK-148, "Diagnosis Procedure"
.
Diagnosis Procedure
INFOID:0000000001396629
1.
CHECK HAZARD SWITCH CIRCUIT
Use the hazard warning switch circuit.
Do the hazard warning lamps operate normally?
YES
>> GO TO 2.
NO
>> Repair hazard warning lamps. Refer to
.
2.
CHECK INTERMITTENT INCIDENT
Refer to @@@.
>> INSPECTION END
VEHICLE SPEED SIGNAL CIRCUIT
DLK-149
< COMPONENT DIAGNOSIS >
[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
VEHICLE SPEED SIGNAL CIRCUIT
Description
INFOID:0000000001396630
Displays the vehicle speed signal received from combination meter as a numerical value (km/h).
Component Function Check
INFOID:0000000001396631
1.
CHECK FUNCTION
Check that all doors are automatically locked at the vehicle speed of more than 12 km/h (7 MPH).
Is the inspection result normal?
YES
>> Vehicle speed signal circuit is OK.
NO
>> Refer to
DLK-149, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000001396632
1.
CHECK VEHICLE SPEED SIGNAL CIRCUIT
Check vehicle speed signal “VEHICLE SPEED” in “Data Monitor” mode.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace vehicle speed signal circuit.
2.
CHECK INTERMITTENT INCIDENT
Refer to @@@.
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст