Nissan Tiida C11. Manual — part 758
EXL-30
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (IPDM E/R)
DIAGNOSIS SYSTEM (IPDM E/R)
CONSULT - III Function (IPDM E/R)
INFOID:0000000001523254
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with IPDM E/R.
DATA MONITOR
Monitor item
ACTIVE TEST
Test item
Diagnosis mode
Description
SELF-DIAG RESULTS
Displays the diagnosis results judged by IPDM E/R.
DATA MONITOR
Displays the real-time input/output data from IPDM E/R input/output data.
ACTIVE TEST
IPDM E/R can provide a drive signal to electronic components to check their operations.
CAN DIAG SUPPORT MONITOR
The results of transmit/receive diagnosis of CAN communication can be read.
Monitor Item
[Unit]
MAIN SIG-
NALS
Description
HL LO REQ
[Off/On]
×
Displays the status of the low beam request signal received from BCM via CAN
communication.
HL HI REQ
[Off/On]
×
Displays the status of the high beam request signal received from BCM via CAN
communication.
FR FOG REQ
[Off/On]
×
Displays the status of the front fog light request signal received from BCM via
CAN communication.
TAIL & CLR REQ
[Off/On]
x
Displays the status of the tail and clearance lamp request signal received from
BCM via CAN communication.
DTRL REQ
[Off]
NOTE:
The item is indicated, but not monitored.
Test item
Operation
Description
EXTERNAL LAMPS
Off
OFF
TAIL
Operates the tail lamp relay.
Lo
Operates the headlamp low relay.
Hi
Operates the headlamp low relay and ON/OFF the headlamp high relay at 1 sec-
ond intervals.
Fog
Operates the front fog lamp relay.
DIAGNOSIS SYSTEM (HEADLAMP LEVELIZER)
EXL-31
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
DIAGNOSIS SYSTEM (HEADLAMP LEVELIZER)
CONSULT-III Function
INFOID:0000000001530336
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with IPDM E/R.
SELF-DIAG RESULTS
DATA MONITOR
Monitor item
ACTIVE TEST
Test item
WORK SUPPORT
Support item
Diagnosis mode
Description
SELF-DIAG RESULTS
Displays the diagnosis results judged by IPDM E/R.
DATA MONITOR
Displays the real-time input/output data from IPDM E/R input/output data.
ACTIVE TEST
IPDM E/R can provide a drive signal to electronic components to check their operations.
CAN DIAG SUPPORT MONITOR
The results of transmit/receive diagnosis of CAN communication can be read.
Error item
Description
Possible cause/Action to take
PARA NOT PROG [B208A]
Height sensor not initialized
Initialize sensor using CONSULT-III
INITIAL NOT DONE [B2081]
Height sensor not initialized
Monitor Item
[Unit]
MAIN SIG-
NALS
Description
INT SEN VALUE
[%]
ACT OUTPUT
[%]
ACT MEASURED
[%]
SPEED SIG
[km/h]
Displays the vehicle speed as received from the combination meter.
LIGHT SIGNAL
[V]
Displays voltage of the parking lamps ON signal as received from the IPDM E/R
INT SEN VOLT
[V]
Displays voltage available to the height sensor.
EXT SEN VOLT
[V]
EXT SEN SIG
[V]
Test item
Operation
Description
LAMP TEST
MIN
Operates aiming motor to lowest axis.
MID
Operates aiming motor to middle axis.
MAX
Operates aiming motor to highest axis.
Test item
Description
SENSOR INITIALISE
Adjust sensor and store initial height setting.
EXL-32
< COMPONENT DIAGNOSIS >
POWER SUPPLY AND GROUND CIRCUIT
COMPONENT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT
BCM (BODY CONTROL MODULE)
BCM (BODY CONTROL MODULE) : Diagnosis Procedure
INFOID:0000000001523255
For BCM power supply and ground circuit information, refer to
XX-XX, "*****"
.
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM) : Di-
agnosis Procedure
INFOID:0000000001523256
For IPDM E/R power supply and ground circuit information, refer to
XX-XX, "*****"
.
HEADLAMP (HI) CIRCUIT
EXL-33
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HEADLAMP (HI) CIRCUIT
HEADLAMP (HALOGEN)
HEADLAMP (HALOGEN) : Description
INFOID:0000000001523259
The IPDM E/R (intelligent power distribution module engine room) controls the headlamp high relay based on
inputs from the BCM via the CAN communication lines. When the headlamp high relay is energized, power
flows through fuses 34 and 35, located in the IPDM E/R. Power then flows to the front combination lamps to
the headlamp high beam.
HEADLAMP (HALOGEN) : Component Function Check
INFOID:0000000001523260
1.
CHECK HEADLAMP (HI) OPERATION
WITHOUT CONSULT-III
1.
Start IPDM E/R auto active test. Refer to
XX-XX, "*****"
.
2.
Check that the headlamp switches to the high beam.
NOTE:
HI/LO is repeated 1 second each when using the IPDM E/R auto active test.
CONSULT-III
1.
Select "EXTERNAL LAMP" of IPDM E/R active test item.
2.
With operating the test items, check that the headlamp switches to the high beam.
Does the headlamp switch to the high beam?
YES
>> Headlamp (HI) circuit is normal.
NO
>> Refer to
EXL-33, "HEADLAMP (HALOGEN) : Diagnosis Procedure"
HEADLAMP (HALOGEN) : Diagnosis Procedure
INFOID:0000000001523261
1.
CHECK HEADLAMP (HI) FUSES
1.
Turn the ignition switch OFF.
2.
Check that the following fuses are not open.
Is the fuse open?
YES
>> Repair the harness and replace the fuse.
NO
>> GO TO 2
2.
CHECK HEADLAMP (HI) OUTPUT VOLTAGE
CONSULT-III ACTIVE TEST
1.
Turn the ignition switch OFF.
2.
Disconnect the front combination lamp connector.
3.
Turn the ignition switch ON.
4.
Select "EXTERNAL LAMP" of IPDM E/R active test item.
5.
With EXTERNAL LAMP ON, check the voltage between the
combination lamp connector and ground.
HI
: Headlamp switches to the high beam.
OFF
: Headlamp OFF
Unit
Location
Fuse No.
Capacity
Headlamp HI (LH) IPDM E/R
35
10A
Headlamp HI (RH) IPDM E/R
34
10A
(+)
(
−
)
Voltage
Connector
Terminal
LH
E25
1
Ground
Battery voltage
RH
E26
PKIC0960E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст