Nissan Tiida C11. Manual — part 932
IP-10
< SERVICE INFORMATION >
INSTRUMENT PANEL ASSEMBLY
INSTRUMENT PANEL ASSEMBLY
Component Parts
INFOID:0000000001523317
1.
Instrument upper mask
2.
Instrument upper panel assembly
3.
Instrument side panel (LH)
4.
Combination meter
5.
Instrument finisher E
6.
Cluster lid A
7.
Instrument panel side cover (LH)
8.
Instrument panel & pad
9.
Side ventilator assembly (LH)
ALJIA0097ZZ
INSTRUMENT PANEL ASSEMBLY
IP-11
< SERVICE INFORMATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
NOTE:
The LHD model shown, RHD similar.
Removal and Installation
INFOID:0000000001523318
NOTE:
The LHD model shown, RHD model similar.
WORK STEPS
When removing instrument panel & pad, cluster lid A, cluster lid C, passenger air bag module assembly and
center console assembly, follow steps in the order shown.
CAUTION:
• Disconnect both battery cables.
• Never tamper with or force air bag lid open, as this may adversely affect air bag performance.
• Be careful not to scratch pad and other parts.
10.
Instrument side finisher
11.
Instrument lower finisher
12.
Steering column cover upper
13.
Fuse block lid
14.
Steering column cover lower
15.
Steering lock escutcheon
16.
Instrument lower cover (LH)
17.
Console rear finisher (with armrest)
18.
Console body assembly (with arm-
rest)
19.
Center console
20.
Console mask cover (with armrest)
21.
Console mask
22.
A/T console finisher / M/T console
boot / CVT console finisher
23.
Console rear finisher (without armrest)
24.
Console body assembly (without
armrest)
25.
Rear cup holder (without armrest)
26.
Instrument lower cover (RH)
27.
Instrument finisher D
28.
Controller
29.
Cluster lid C
30.
Audio unit
31.
Glove box assembly
32.
Side ventilator assembly (RH)
33.
Instrument panel side cover (RH)
34.
Passenger air bag module assembly 35.
Instrument side panel (RH)
Pawl
Clip
Metal clip
Parts
Reference
page
Instrument
panel and pad
Cluster lid A
Cluster lid C
Passenger air
bag module
assembly
Center con-
sole assembly
Instrument finisher E
"Remov-
al"
[ 1 ]
[ 1 ]
[ 1 ]
Cluster lid C
"CLUS-
TER LID
C"
[ 2 ]
[ 2 ]
Audio unit
[ 3 ]
Front pillar garnish (LH/RH)
[ 4 ]
[ 2 ]
[ 1 ]
Instrument side panel (LH/RH)
[ 5 ]
[ 3 ]
[ 2 ]
Instrument panel side covers (LH/RH)
[ 6 ]
[ 4 ]
[ 3 ]
Instrument side finisher
[ 7 ]
[ 5 ]
Side ventilator assembly (LH)
[ 8 ]
[ 6 ]
Steering lock escutcheon
[ 9 ]
Steering column cover upper
[ 10 ]
[ 7 ]
Steering column cover lower
[ 11 ]
Cluster lid A
"CLUS-
TER LID
A"
[ 12 ]
[ 8 ]
Combination meter
[ 13 ]
Instrument lower finisher
"INSTRU-
MENT
LOWER
FINISH-
ER"
[ 14 ]
IP-12
< SERVICE INFORMATION >
INSTRUMENT PANEL ASSEMBLY
[ ]: Number indicates step in removal procedures.
INSTRUMENT PANEL ASSEMBLY
Removal
1.
Pull instrument finisher E backward by approximately 30
degrees while disengaging the instrument finisher E metal clips
and pawl.
Glove box assembly
"GLOVE
BOX AS-
SEMBLY"
[ 15 ]
Side ventilator assembly (RH)
[ 16 ]
[ 4 ]
Passenger air bag module assembly
[ 17 ]
[ 5 ]
Instrument upper mask
[ 18 ]
Instrument finisher D
[ 19 ]
Controller
[ 20 ]
Instrument upper panel assembly
[ 21 ]
Console mask
"Remov-
al"
[ 22 ]
[ 1 ]
CVT, A/T console finisher
[ 23 ]
[ 2 ]
M/T console boot
[ 23 ]
[ 2 ]
Console rear finisher
[ 24 ]
[ 3 ]
Console mask cover (with arm rest)
[ 25 ]
[ 4 ]
Rear cup holder (without arm rest)
[ 25 ]
[ 4 ]
Console body assembly
[ 26 ]
[ 5 ]
Instrument lower cover (LH/RH)
"INSTRU-
MENT
LOWER
FINISH-
ER"
[ 27 ]
[ 6 ]
Center console assembly
"CEN-
TER
CON-
SOLE AS-
SEMBLY"
[ 28 ]
[ 7 ]
Fuse block lid
[ 29 ]
Lighting and turn signal switch
[ 30 ]
Wiper & washer switch
[ 31 ]
Instrument panel & pad
[ 32 ]
Parts
Reference
page
Instrument
panel and pad
Cluster lid A
Cluster lid C
Passenger air
bag module
assembly
Center con-
sole assembly
WIIA1224E
INSTRUMENT PANEL ASSEMBLY
IP-13
< SERVICE INFORMATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
2.
Remove cluster lid C.
a.
Remove cluster lid C screws.
b.
Pull back and disengage pawls and cluster lid C metal clips.
c.
Disconnect harness connector and then remove cluster lid C.
3.
Remove audio unit. Refer to
AV-23, "Removal and Installation"
4.
Remove front pillar garnish. Refer to
5.
Remove the side panel (LH/RH).
a.
Pull up instrument side panel and disengage pawls.
b.
Remove instrument side panel.
6.
Remove LH instrument panel side cover.
a.
Using a suitable tool insert into upper space of instrument panel
side cover.
b.
Disengage pawls, and then remove instrument panel side cover.
7.
Remove the instrument panel side cover (1) pawls, using a suit-
able tool.
a.
Lift the instrument panel side cover upward and away from the
instrument panel to remove.
b.
Disconnect the passenger air bag deactivation switch harness
connector.
WIIA1225E
PIIB2439J
PIIB2448E
ALHIA0045ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст