Nissan Tiida C11. Manual — part 1457
FRONT WIPER AUTO STOP SIGNAL CIRCUIT
WW-23
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Check continuity between IPDM E/R harness connector and front
wiper motor harness connector.
Does continuity exist?
YES
>> Replace front wiper motor. Refer to
.
NO
>> Repair or replace harness.
IPDM E/R
Front wiper motor
Continuity
Connector
Terminal
Connector
Terminal
E46 (A)
38
E1 (B)
4
Yes
ALLIA0349ZZ
WW-24
< COMPONENT DIAGNOSIS >
FRONT WIPER MOTOR GROUND CIRCUIT
FRONT WIPER MOTOR GROUND CIRCUIT
Diagnosis Procedure
INFOID:0000000001366616
1.
CHECK FRONT WIPER MOTOR (GROUND) OPEN CIRCUIT
1.
Turn the ignition switch OFF.
2.
Disconnect front wiper motor.
3.
Check continuity between front wiper motor harness connector
and ground.
Does continuity exist?
YES
>> Front wiper motor ground circuit is normal.
NO
>> Repair or replace harness.
Front wiper motor
Ground
Continuity
Connector
Terminal
E1
2
Yes
WKIA5488E
WASHER SWITCH
WW-25
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WASHER SWITCH
Description
INFOID:0000000001366617
• Washer switch is integrated with combination switch.
• Combination switch switches polarity between front washer operating and rear washer operating to supply
power to the front and rear washer motor on ground.
Component Inspection
INFOID:0000000001366618
1.
CHECK FRONT WASHER SWITCH
1.
Turn the ignition switch OFF.
2.
Disconnect combination switch.
3.
Check continuity between the combination switch terminals.
Does continuity exist?
YES
>> Wiper and washer switch is normal.
NO
>> Replace combination switch. Refer to
EXL-101, "Removal and Installation"
.
2.
CHECK REAR WASHER SWITCH
1.
Turn the ignition switch OFF.
2.
Disconnect combination switch.
3.
Check continuity between the combination switch terminals.
ALLIA0350GB
A: Terminal 14
B: Terminal 12
C: Terminal 13
D: Terminal 11
ALLIA0351ZZ
JPLIA0164GB
Combination switch
Condition
Continuity
Terminal
11
12
Front washer switch ON
Yes
13
14
A: Terminal 14
B: Terminal 12
C: Terminal 13
D: Terminal 11
ALLIA0352ZZ
JPLIA0164GB
WW-26
< COMPONENT DIAGNOSIS >
WASHER SWITCH
Does continuity exist?
YES
>> Wiper and washer switch is normal.
NO
>> Replace combination switch. Refer to
EXL-101, "Removal and Installation"
Combination switch
Condition
Continuity
Terminal
11
14
Rear washer switch ON
Yes
12
13
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст