Nissan Tiida C11. Manual — part 1409
TRANSAXLE ASSEMBLY
TM-687
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
FINAL DRIVE
1.
Reverse fork rod
2.
Selector
3.
Retaining pin
4.
5th-6th shift fork
5.
3rd-4th shift fork
6.
3rd-4th and 5th-6th fork rod
7.
1st-2nd fork rod
: Replace the parts as a set.
SFIA3295E
TM-688
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
TRANSAXLE ASSEMBLY
Disassembly
INFOID:0000000001381646
1.
Drain the oil from the transaxle. Refer to
.
2.
Remove filler plug and gasket from transaxle case.
3.
Remove shift lever retaining pin (1) and shifter lever using suit-
able tool.
4.
Remove bracket (2) and position switch (3) from transaxle case.
1.
Side gear
2.
Pinion mate gear
3.
Thrust washer
4.
Pinion mate shaft
5.
shim
6.
Differential side bearing outer race
(transaxle case side)
7.
Differential side bearing inner race
(transaxle case side)
8.
Final gear
9.
Differential case
10. Speedometer drive gear
11.
Lock ring
12. Differential side bearing inner race
(clutch housing side)
13. Differential side bearing outer race
(clutch housing side)
: Replace the parts as a set.
SFIA3296E
PCIB1693E
TRANSAXLE ASSEMBLY
TM-689
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
5.
Remove the bolts as shown.
6.
Remove reverse idler shaft bolt and seal washer.
7.
Remove transaxle case (1) upward while rotating selector lever
(2).
8.
Remove spring (1) of selector from return bushing (2).
9.
Move 1st-2nd fork rod (1), 3rd-4th and 5th-6th fork rod (2), and
reverse fork rod (3) to neutral position.
10. Remove selector (4) from clutch housing.
PCIB1694E
PCIB1695E
JPDIC0105ZZ
PCIB1697E
PCIB1698E
TM-690
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
TRANSAXLE ASSEMBLY
11. Remove retaining pin from 5th-6th shift fork using a pin punch.
12. Remove 3rd-4th and 5th-6th fork rod (1) assembly according to
the following.
a.
Lift the fork rod up.
b.
Remove 3rd-4th and 5th-6th fork rod (1) assembly from clutch
housing.
c.
Remove 3rd-4th shift fork and 5th-6th shift fork from 3rd-4th and
5th-6th fork rod.
13. Remove reverse gear assembly (1) according to the following.
a.
Lift up the input shaft assembly (2) and mainshaft assembly (3).
b.
Remove reverse gear assembly (1) and reverse fork rod (4)
from clutch housing.
14. Remove spring washer located under the reverse idler shaft.
15. Remove input shaft assembly (1), mainshaft assembly (2), and
1st-2nd fork rod (3) from clutch housing.
16. Remove final drive assembly (1) from clutch housing.
17. Remove magnet from clutch housing.
PCIB1699E
PCIB1700E
PCIB1701E
PCIB1702E
PCIB1703E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст