Nissan Tiida C11. Manual — part 1422
VTL-24
< ON-VEHICLE REPAIR >
[AUTOMATIC AIR CONDITIONER]
DUCTS AND GRILLES
CENTER VENTILATOR GRILLES
Removal
1.
Remove cluster lid C. Refer to
.
2.
Remove center ventilator grills (1) from cluster lid C using suit-
able tool (A).
Installation
Installation is in the reverse order of removal.
SIDE VENTILATOR GRILLES (LH/RH)
Removal
1.
Remove side ventilator assembly (LH). Refer to
2.
Remove side ventilator grille (LH) (1) using suitable tool (A).
3.
Remove side ventilator assembly (RH). Refer to
.
4.
Remove the side ventilator grille (RH) screw.
5.
Remove side ventilator grille (RH) (1) using suitable tool (A).
Installation
Installation is in the reverse order of removal.
DEFROSTER NOZZLE AND SIDE DEFROSTER DUCTS (LH/RH)
1.
Front floor duct
2.
Rear floor duct (left)
3.
Clip
4.
Rear floor duct (right)
ZJIA0661E
SJIA0658E
SJIA0659E
DUCTS AND GRILLES
VTL-25
< ON-VEHICLE REPAIR >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
Removal
1.
Remove instrument upper finisher. Refer to
2.
Remove screws and then remove side defroster duct (RH) and side defroster duct (LH).
3.
Remove screws, and then remove defroster nozzle.
Installation
Installation is in the reverse order of removal.
SIDE VENTILATOR DUCTS
Removal
1.
Remove instrument panel and pad. Refer to
2.
Remove screws (A), and then remove side ventilator duct (left)
(1).
3.
Remove screw (A) and clip (B), and then remove side ventilator
duct (right) (1).
Installation
Installation is in the reverse order of removal.
1.
Side defroster duct (RH)
2.
Side defroster duct (LH)
3.
Defroster nozzle
A.
Side defroster duct screw
B.
Defroster nozzle screw
WJIA2199E
SJIA0661E
SJIA0662E
VTL-26
< ON-VEHICLE REPAIR >
[AUTOMATIC AIR CONDITIONER]
DUCTS AND GRILLES
CENTER VENTILATOR DUCTS
Removal
1.
Remove instrument panel and pad. Refer to
2.
Remove screws (A), and then remove center ventilator ducts
(1).
Installation
Installation is in the reverse order of removal.
SIDE FOOT DUCTS
NOTE:
The side foot ducts are part of the A/C unit assembly case.
Removal
1.
Remove A/C unit assembly. Refer to
VTL-12, "Removal and Installation"
.
2.
Remove screws (A), and then remove side foot duct (LH) (1).
3.
Remove screws (A), and then remove side foot duct (RH) (1).
Installation
Installation is in the reverse order of removal.
FLOOR DUCTS
Removal
1.
Remove front seats and center console assembly. Refer to
SE-14, "Removal and Installation"
SJIA0663E
SJIA0664E
SJIA0665E
DUCTS AND GRILLES
VTL-27
< ON-VEHICLE REPAIR >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
2.
Disengage claws (A), and then remove front floor duct (1).
3.
Peel back floor trim to a point where floor duct is visible.
4.
Remove clips (A), and then remove rear floor duct (left) (1) and
rear floor duct (right) (2).
Installation
Installation is in the reverse order of removal.
SJIA0667E
SJIA0668E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст