Nissan Tiida C11. Manual — part 1434
WCS-18
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (METER)
DIAGNOSIS SYSTEM (METER)
CONSULT-III Function (METER/M&A)
INFOID:0000000001728303
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
SELF-DIAG RESULTS
Display Item List
.
DATA MONITOR
Display Item List
X: Applicable
METER/M&A diagnosis mode
Description
SELF-DIAG RESULTS
Displays combination meter self-diagnosis results.
DATA MONITOR
Displays combination meter input/output data in real time.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
Display item [Unit]
MAIN
SIGNALS
SELECTION
FROM MENU
Description
SPEED METER [km/h] or [mph]
X
X
Displays the value of vehicle speed signal.
SPEED OUTPUT [km/h] or [mph]
X
X
Displays the value of vehicle speed signal, which is transmitted to
each unit with CAN communication.
TACHO METER [rpm]
X
X
Displays the value of engine speed signal, which is input from ECM.
W TEMP METER [
°
C] or [
°
F]
X
X
Displays the value of engine coolant temperature signal, which is in-
put from ECM.
FUEL METER [lit.]
X
X
Displays the value, which processes a resistance signal from fuel
gauge.
DISTANCE [km] or [mile]
X
X
Displays the value, which is calculated by vehicle speed signal, fuel
gauge and fuel consumption from ECM.
FUEL W/L [ON/OFF]
X
X
Displays [ON/OFF] condition of low-fuel warning lamp.
C-ENG W/L [ON/OFF]
X
Displays [ON/OFF] condition of malfunction indicator lamp.
SEAT BELT W/L [ON/OFF]
X
Indicates [ON/OFF] condition of seat belt warning lamp.
BUZZER [ON/OFF]
X
X
Displays [ON/OFF] condition of buzzer.
DOOR W/L [ON/OFF]
X
Displays [ON/OFF] condition of door warning lamp.
HI-BEAM IND [ON/OFF]
X
Displays [ON/OFF] condition of high beam indicator.
TURN IND [ON/OFF]
X
Displays [ON/OFF] condition of turn indicator.
FR FOG IND
X
Displays [ON/OFF] condition of front fog lamp indicator.
RR FOG IND
X
Displays [ON/OFF] condition of rear fog lamp indicator.
OIL W/L [ON/OFF]
X
Displays [ON/OFF] condition of oil pressure warning lamp.
LIGHT IND
X
Displays [ON/OFF] condition of exterior lamp indicator.
VDC/TCS IND [ON/OFF]
X
Displays [ON/OFF] condition of VDC OFF indicator lamp.
ABS W/L [ON/OFF]
X
Displays [ON/OFF] condition of ABS warning lamp.
SLIP IND [ON/OFF]
X
Displays [ON/OFF] condition of SLIP indicator lamp.
BRAKE W/L [ON/OFF]
X
Displays [ON/OFF] condition of brake warning lamp.*
OIL LEVEL IND
X
Displays [ON/OFF] condition of oil level indicator.
KEY G W/L [ON/OFF]
X
Displays [ON/OFF] condition of key green warning lamp.
KEY R W/L [ON/OFF]
X
Displays [ON/OFF] condition of key red warning lamp.
KEY KNOB W/L [ON/OFF]
X
Displays [ON/OFF] condition of key knob warning lamp.
PNP P SW
X
X
Displays [ON/OFF] condition of inhibitor P switch.
WCS
DIAGNOSIS SYSTEM (METER)
WCS-19
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
NOTE:
Some items are not available due to vehicle specification.
*: The monitor will indicate “OFF” even though the brake warning lamp is on if either of the following conditions exist.
• The parking brake is engaged
• The brake fluid level is low
PNP N SW
X
X
Displays [ON/OFF] condition of inhibitor N switch.
O/D OFF SW
X
Displays [ON/OFF] condition of O/D OFF switch.
BRAKE SW [ON/OFF]
X
Displays [ON/OFF] condition of parking brake switch.
P RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift P range indicator.
R RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift R range indicator.
N RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift N range indicator.
D RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift D range indicator.
2 RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift 2 range indicator.
1 RANGE IND [ON/OFF]
X
X
Displays [ON/OFF] condition of A/T shift 1range indicator.
O/D OFF W/L
X
Displays [ON/OFF] condition of O/D OFF indicator lamp.
CRUISE IND [ON/OFF]
X
Displays [ON/OFF] condition of CRUISE indicator.
EPS W/L
X
Displays [ON/OFF] condition of EPS warning lamp.
Display item [Unit]
MAIN
SIGNALS
SELECTION
FROM MENU
Description
WCS-20
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
DIAGNOSIS SYSTEM (BCM)
BUZZER
BUZZER : CONSULT-III Function (BCM - BUZZER)
INFOID:0000000001722925
CONSULT-III APPLICATION ITEMS
DATA MONITOR
ACTIVE TEST
Test item
Diagnosis mode
Description
BUZZER
Data Monitor
Displays BCM input data in real time.
Active Test
Operation of electrical loads can be checked by sending driving signal to them.
Display item
[Unit]
Description
IGN ON SW
[On/Off]
Status of ignition switch judged by BCM.
KEY IN SW
[On/Off]
Status of key switch judged by BCM.
DOOR SW-DR
[On/Off]
Status of front door switch (driver side) judged by BCM.
DOOR SW-AS
[On/Off]
Status of front door switch (passenger side) judged by BCM.
DOOR SW-RR
[On/Off]
Status of rear door switch RH judged by BCM.
DOOR SW-RL
[On/Off]
Status of rear door switch LH judged by BCM.
BACK DOOR SW-
[On/Off]
Status of back door switch judged by BCM.
LIGHTING SW
[On/Off]
Status of lighting switch judged by BCM using the combination switch readout function.
CDL LOCK SW
[On/Off]
Status of door lock switch judged by BCM.
CDL UNLOCK SW
[On/Off]
TRNK OPNR SW
[On/Off]
Status of trunk opener switch judged by BCM.
Display item
[Unit]
Description
KEY REMINDER WARN
The key warning chime operation can be checked by operating the relevant function (On/Off).
LIGHT WARN ALM
The light warning chime operation can be checked by operating the relevant function (On/Off).
BACK DR OPEN WARN
The back door open warning operation can be checked by operating the relevant function (On/Off).
DOOR WARNING IND
The door open warning operation can be checked by operating the relevant function (On/Off).
WCS
POWER SUPPLY AND GROUND CIRCUIT
WCS-21
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
COMPONENT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT
COMBINATION METER
COMBINATION METER : Diagnosis Procedure
INFOID:0000000001728304
1.
CHECK FUSES
Check for blown combination meter fuses.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse.
2.
POWER SUPPLY CIRCUIT CHECK
1.
Disconnect combination meter connector M24.
2.
Check voltage between combination meter harness connector
M24 terminals 27, 28 and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Check harness for open between combination meter and fuse.
3.
GROUND CIRCUIT CHECK
1.
Turn ignition switch OFF.
2.
Check continuity between combination meter harness connector
M24 terminals 21, 22, 23 and ground.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Repair harness or connector.
BCM (BODY CONTROL MODULE)
BCM (BODY CONTROL MODULE) : Diagnosis Procedure
INFOID:0000000001728305
1.
CHECK FUSES AND FUSIBLE LINK
Unit
Power source
Fuse No.
Combination meter
Battery 13
Ignition switch ON or START
3
Terminals
Ignition switch position
(+)
(–)
OFF
ON
START
Connector
Terminal
M24
27
Ground
Battery
voltage
Battery
voltage
Battery
voltage
28
0V
Battery
voltage
Battery
voltage
PKIC0700E
Terminals
Continuity
(+)
(–)
Connector
Terminal
M24
21
Ground
Yes
22
23
PKIC0701E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст