Nissan Tiida C11. Manual — part 644

EC-1226

< ECU DIAGNOSIS >

[K9K]

ECM

AIR CIRC SUBFUNCTION (TURBOCHARGER/INTAKE AIR)

Test Condition: Engine Stopped and Ignition Switch ON

9

Engine

MOTOR

RUNNING
Indicates the current status of
the engine.
• STOPPED
• STARTER
• ACTIVATED
• RUNNING

NONE.

10

Engine immobilizer

ENGINE IMMOBI

INACTIVE
Indicates the status of the immo-
bilizer system.
• INACTIVE: The ECM has rec-

ognized the immobilizer code
transmitted by the Intelligent
Key unit or BCM.

• ACTIVE: The ECM does not

recognize the immobilizer
code transmitted by the Intelli-
gent Key unit or BCM.

If ACTIVE, perform the trouble diag-
nosis for NATS.

11

Vehicle speed

VEHICLE SPEED

0 km/h (mph)
Indicates the vehicle speed in
km/h (mph). This parameter is
transmitted by the “ABS actuator
and electric unit (control unit)” or
combination meter via CAN
communication line.

Perform the trouble diagnosis for
CAN communication line. Perform
the trouble diagnosis for “ABS actu-
ator and electric unit (control unit)” or
combination meter.

Order

Function

Parameter

Display and notes

Trouble diagnosis

Order

Function

Parameter

Display and notes

Trouble diagnosis

1

Intake air pressure

ATOMOS PRESS

700 mbar < ATOMOS PRESS
< 1100 mbar
Indicates the ambient baromet-
ric pressure in mbar. The sen-
sor is incorporated in the ECM.

If not consistent, check ATOMOS
PRESS = INLET PRESS = local
ambient barometric pressure, with
the engine stopped and ignition
switch ON.

INLET PRESS

Indicates the pressure in the
turbocharger in mbar.

2

Intake air

ATMOS PRES SEN V

1.6V < ATMOS PRES SEN V <
4.9V

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P2226 BARO SENSOR.

AIR TEMP SEN V

0.1V < AIR TEMP SEN V <
4.8V

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0110 IAT SENSOR.

3

air flow

AIR FLOW

0 mg/st
Mass air flow estimated by the
ECM.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0100 MAF SENSOR.

AIR FLOW DEMAND

Mass air flow request set point
the ECM.

AIR FLOW SUPLY V

0.27V < AIR FLOW SUPLY V <
4.56V
Indicates voltage of the mass
air flow sensor.

4

Inlet air temperature

INLET AIR TEM

Indicates the intake air temper-
ature in

°

C. This information is

provided by the IAT sensor.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0110 IAT SENSOR.

5

Engine speed

ENGINE SPEED

0 rpm
Indicates the engine's rotation-
al speed in rpm.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0335 CKP SENSOR.

ECM

EC-1227

< ECU DIAGNOSIS >

[K9K]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

Test Condition: Engine at idle

*: Just at start time. After 1 minute, EGR volume control valve will close and flow start increase.

FUEL CIRCUIT SUB FUNCTION

Test Condition: Engine Stopped and Ignition Switch ON

Order

Function

Parameter

Display and notes

Trouble diagnosis

1

Intake air pressure

ATOMOS PRESS

700 mbar < ATOMOS PRESS
< 1100 mbar
Indicates the ambient baromet-
ric pressure in mbar. The sen-
sor is incorporated in the ECM.

If not consistent, check ATOMOS
PRESS = INLET PRESS = local
ambient barometric pressure, with
the engine stopped and ignition
switch ON.

INLET PRESS

Indicates the pressure in the
turbocharger in mbar.
INLET PRESS = local ambient
barometric pressure.

2

Intake air

ATMOS PRES SEN V

1.6V < ATMOS PRES SEN V <
4.9V

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P2226 BARO SENSOR.

AIR TEMP SEN V

0.1V < AIR TEMP SEN V <
4.8V

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0110 IAT SENSOR.

3

air flow

AIR FLOW

200* < AIR FLOW < 350 mg/st
Mass air flow measured the
ECM.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0100 MAF SENSOR.

AIR FLOW DEMAND

The flow must follow the re-
quest and must be near to it.

AIR FLOW SUPLY V

Indicates the voltage of the
mass air flow sensor.

4

Inlet air temperature

INLET AIR TEM

Indicates the intake air temper-
ature in

°

C. This information is

provided by the IAT sensor.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0110 IAT SENSOR.

5

Engine speed

ENGINE SPEED

About 800 rpm
Indicates the engine's rotation-
al speed in rpm.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0335 CKP SENSOR.

Order

Function

Parameter

Display and notes

Trouble diagnosis

1

Fuel pump tempera-
ture

FUEL TEMP

Close to ambient temperature
(cold engine).
Indicates the fuel pump tempera-
ture in

°

C.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0180 FTT SENSOR.

FUEL TEMP SEN V

0.1V < FUEL TEMP SEN V <
4.9V

2

Engine coolant tem-
perature

WATER TEMP

Close to ambient temperature
(cold engine).
Indicates the engine coolant tem-
perature in

°

C.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0115 ETC SENSOR.

COOLAN TMP SEN V

0.13V < COOLAN TMP SEN V <
4.90V

3

Engine speed

ENGINE SPEED

Indicates the engine's rotational
speed in rpm.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0335 CKP SENSOR.

4

Fuel rail pressure

RAIL PRESSURE

Indicates the theoretical pressure
value for optimum engine opera-
tion.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0190 and P1089 FRP SENSOR.

RAIL PRES SET

RAIL PRES SET = 0 bar

RAIL PRES S V

0.4V < RAIL PRES S V < 4.7V

EC-1228

< ECU DIAGNOSIS >

[K9K]

ECM

Test Condition: Engine at Idle

5

Fuel flow

FUEL FLOW REG

INACTIVE

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0001 FUEL PUMP.

FUEL FLOW S/V CU

Close to 0A

F/FLOW CORR CYL1

Cylinder no. 1 - 4 fuel flow correc-
tion = 0

NONE

F/FLOW CORR CYL2

F/FLOW CORR CYL3

F/FLOW CORR CYL4

6

Fuel pressure

FUEL PRESS REG

INACTIVE

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0090 FUEL PUMP.

7

Intake air tempera-
ture

AIR TEMP SEN V

0.1V < AIR TEMP SEN V < 4.8V

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0110 IAT SENSOR.

8

Fuel injectors

INJCTR CONDNSR V

49V < INJCTR CONDNSR V <
96V

In the event of a malfunction, per-
form the trouble diagnosis for
P0201, P0202, P0203 and P0204
FUEL INJECTOR.

COMM INJCTR CYL1

INACTIVE

COMM INJCTR CYL2

COMM INJCTR CYL3

COMM INJCTR CYL4

Order

Function

Parameter

Display and notes

Trouble diagnosis

Order

Function

Parameter

Display and notes

Trouble diagnosis

1

Fuel pump tempera-
ture

FUEL TEMP

Indicates the fuel pump tempera-
ture in

°

C.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0180 FTT SENSOR.

FUEL TEMP SEN V

0.1V < FUEL TEMP SEN V <
4.9V

2

Engine coolant tem-
perature

WATER TEMP

Indicates the engine coolant tem-
perature in

°

C.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0115 ETC SENSOR.

COOLAN TMP SEN V

0.1V < COOLAN TMP SEN V <
4.9V

3

Engine speed

ENGINE SPEED

About 800 rpm
Indicates the engine's rotational
speed in rpm.

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0335 CKP SENSOR.

4

Fuel rail pressure

RAIL PRESSURE

Indicates the theoretical pressure
value for optimum engine opera-
tion.
200 bar < RAIL PRESSURE <
250 bar

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0190 and P1089 FRP SENSOR.

RAIL PRES SET

The pressure must follow the set-
point and must be near to it.

RAIL PRES S V

0.4V < RAIL PRES S V < 4.7V

5

Fuel flow

FUEL FLOW REG

ACTIVE

NONE.

FUEL FLOW S/V CU

Maximum 2A

NONE.

F/FLOW CORR CYL1

F/FLOW CORR CYL1-4 = 0.3 -
1.9

In the event of a malfunction, per-
form the trouble diagnosis for
TEST6: MAJJOR LEAK IIN FUEL
INJECTORS/FUEL INJECTORS
OPEN.

F/FLOW CORR CYL2

F/FLOW CORR CYL3

F/FLOW CORR CYL4

6

Fuel pressure

FUEL PRESS REG

ACTIVE

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0090 FUEL PUMP.

ECM

EC-1229

< ECU DIAGNOSIS >

[K9K]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

DRIVER PARAMETERS SUB FUNCTION

Test Condition: Engine Stopped and Ignition Switch ON

Test Condition: Engine at Idle

7

Intake air tempera-
ture

AIR TEMP SEN V

0.1V < AIR TEMP SEN V < 4.8V

In the event of a malfunction, per-
form the trouble diagnosis for DTC
P0110 IAT SENSOR.

8

Fuel injectors

INJCTR CONDNSR V

49V < INJCTR CONDNSR V <
96V

In the event of a malfunction, per-
form the trouble diagnosis for
P0201, P0202, P0203 and P0204
FUEL INJECTOR.

COMM INJCTR CYL1

ACTIVE

COMM INJCTR CYL2

COMM INJCTR CYL3

COMM INJCTR CYL4

Order

Function

Parameter

Display and notes

Trouble diagnosis

Order

Function

Parameter

Display and notes

Trouble diagnosis

1

Power supply

C/U+AFTR IGN

PRESENT

NONE

2

Clutch pedal

ACC PEDAL DETECT

NO

In the event of a malfunction, per-
form the trouble diagnosis for
ASCD CLUTCH SWITCH.

3

Malfunction indica-
tor

SEVERITY 1 LIGHT

INACTIVE

Also check that there are no mal-
function ECM.

SEVERITY 2 LIGHT

INACTIVE

4

Accelerator pedal

ACCEL/PDL POS

0% = ACCEL/PDL POS < 100%
Indicates the percentage of the
accelerator pedal position be-
tween no load and full load posi-
tion.

In the event of a malfunction, per-
form the trouble diagnosis for APP
SENSOR (DTC P0225, and
P2120) and SENSOR POWER
SUPPLY (DTC P0641 and P0651).

PEDAL POS TRACK1

Indicates the percentage of the
accelerator pedal position be-
tween no load and full load posi-
tion.

PL PTNMR T1 V

0.4V < PL PTNMR T1V < 4.64V
Indicates the percentage of the
accelerator pedal position be-
tween no load (0V) and full load
(5V) position.

PEDAL POS TRACK2

Indicates the percentage of the
accelerator pedal position be-
tween no load and full load posi-
tion.

PL PTNMR T2 V

0.27V < PL PTNMR T2V < 3.75V
Indicates the percentage of the
accelerator pedal position be-
tween no load (0V) and full load
(5V) position.

Order

Function

Parameter

Display and notes

Trouble diagnosis

1

Power supply

C/U+AFTR IGN

PRESENT

NONE

2

Clutch pedal

ACC PEDAL DETECT

NO

In the event of a malfunction, per-
form the trouble diagnosis for
ASCD CLUTCH SWITCH.

3

Malfunction indicator

SEVERITY 1 LIGHT

INACTIVE

Also check that there are no mal-
function ECM.

SEVERITY 2 LIGHT

INACTIVE