Nissan Tiida C11. Manual — part 1283
ROAD TEST
TM-183
< ON-VEHICLE MAINTENANCE >
[TYPE 1 (4AT: RE4F03B)]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Move selector lever to “D”, “2” and “1” positions and check if vehicle
creeps forward.
Does vehicle creep forward in all three positions?
YES
>> GO TO
TM-183, "Cruise Test - Part 1"
.
NO
>> • Mark the box on the
XX-XX, "*****"
.
TM-144, "Vehicle Does Not Creep Forward in
.
• Continue “Road Test”.
Cruise Test - Part 1
INFOID:0000000001696172
1.
CHECK STARTING GEAR (D
1
) POSITION
1.
Drive vehicle for approximately 10 minutes to warm engine oil and ATF up to operating temperature.
2.
Park vehicle on flat surface.
3.
Push overdrive control switch. (OD OFF indicator lamp is off.)
4.
Move selector lever to “P” position.
5.
Start engine.
6.
Move selector lever to “D” position.
7.
Accelerate vehicle by constantly depressing accelerator pedal
half-way.
Read gear position. Refer to
XX-XX, "*****"
.
Does vehicle start from D
1
?
YES
>> GO TO 2.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-145, "Vehicle Cannot Be Started from D
.
• Continue “Road Test”.
2.
CHECK SHIFT-UP (D
1
TO D
2
)
Check shift-up (D
1
to D
2
).
Specified speed when shifting from D
1
to D
2.
Refer to
TM-188, "Vehicle Speed When Shifting Gears"
.
SAT773B
ATF operating temperature:
50 - 80
°
C (122 - 176
°
F)
SCIA5472E
SAT775B
SAT495G
TM-184
< ON-VEHICLE MAINTENANCE >
[TYPE 1 (4AT: RE4F03B)]
ROAD TEST
Read gear position, throttle opening and vehicle speed.
Refer to
XX-XX, "*****"
.
Does A/T shift from D
1
to D
2
at the specified speed?
YES
>> GO TO 3.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-146, "A/T Does Not Shift: D
• Continue “Road Test”.
3.
CHECK SHIFT-UP (D
2
TO D
3
)
Check shift-up (D
2
to D
3
).
Specified speed when shifting from D
2
to D
3.
Refer to
TM-188, "Vehicle Speed When Shifting Gears"
.
Read gear position, throttle opening and vehicle speed.
Refer to
XX-XX, "*****"
.
Does A/T shift from D
2
to D
3
at the specified speed?
YES
>> GO TO 4.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-148, "A/T Does Not Shift: D
• Continue “Road Test”.
4.
CHECK SHIFT-UP (D
3
TO D
4
)
Check shift-up (D
3
to D
4
).
Specified speed when shifting from D
3
to D
4.
Refer to
TM-188, "Vehicle Speed When Shifting Gears"
.
Read gear position, throttle opening and vehicle speed.
Refer to
XX-XX, "*****"
.
Does A/T shift from D
3
to D
4
at the specified speed?
YES
>> GO TO 5.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-149, "A/T Does Not Shift: D
• Continue “Road Test”.
5.
CHECK LOCK-UP (D
4
TO D
4
L/U)
Check lock-up (D
4
to D
4
L/U).
Specified speed when lock-up occurs. Refer to
TM-188, "Vehicle Speed When Performing and Releasing
.
Read vehicle speed, throttle opening when lock-up duty
becomes 94%. Refer to
XX-XX, "*****"
.
Does A/T perform lock-up at the specified speed?
YES
>> GO TO 6.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-151, "A/T Does Not Perform Lock-up"
.
• Continue “Road Test”.
6.
CHECK LOCK-UP HOLD
Check lock-up hold.
SCIA7188E
SCIA7189E
SCIA7190E
SCIA7191E
ROAD TEST
TM-185
< ON-VEHICLE MAINTENANCE >
[TYPE 1 (4AT: RE4F03B)]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
When lock-up duty becomes 94%. Refer to
XX-XX, "*****"
.
Does A/T hold lock-up condition for more than 30 seconds?
YES
>> GO TO 7.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-151, "A/T Does Not Hold Lock-up Condition"
.
• Continue “Road Test”.
7.
CHECK SHIFT-DOWN (D
4
L/U TO D
4
)
Release accelerator pedal.
When lock-up duty becomes 4%. Refer to
XX-XX, "*****"
.
Is lock-up released when accelerator pedal is released?
YES
>> GO TO 8.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-152, "Lock-up Is Not Released"
• Continue “Road Test”.
8.
CHECK SHIFT-DOWN (D
4
TO D
3
)
Decelerate vehicle by applying foot brake lightly.
Read gear position and engine speed. Refer to
XX-XX,
"*****"
.
Does engine speed return to idle smoothly when A/T is shifted from
D
4
to D
3
?
YES
>> 1.
Stop vehicle.
2.
Go to
TM-185, "Cruise Test - Part 2"
.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-153, "Engine Speed Does Not Return to
.
• Continue “Road Test”.
Cruise Test - Part 2
INFOID:0000000001696173
1.
CHECK STARTING GEAR (D
1
) POSITION
1.
Push overdrive control switch. (OD OFF indicator lamp is off.)
2.
Move selector lever to “D” position.
3.
Accelerate vehicle by half throttle again.
Read gear position. Refer to
XX-XX, "*****"
.
Does vehicle start from D
1
?
YES
>> GO TO 2.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-145, "Vehicle Cannot Be Started from D
.
• Continue “Road Test”.
2.
CHECK SHIFT-UP AND SHIFT-DOWN (D
3
TO D
4
TO D
2
)
1.
Accelerate vehicle to 80 km/h (50 MPH) as shown in the figure.
SAT959I
SAT495G
TM-186
< ON-VEHICLE MAINTENANCE >
[TYPE 1 (4AT: RE4F03B)]
ROAD TEST
2.
Release accelerator pedal and then quickly depress it fully.
Read gear position and throttle opening. Refer to
XX-XX,
"*****"
.
Does A/T shift from D
4
to D
2
as soon as accelerator pedal is
depressed fully?
YES
>> GO TO 3.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-146, "A/T Does Not Shift: D
• Continue “Road Test”.
3.
CHECK SHIFT-UP (D
2
TO D
3
)
Check shift-up (D
2
to D
3
)
Specified speed when shifting from D
2
to D
3
. Refer to
TM-188, "Vehicle Speed When Shifting Gears"
.
Read gear position, throttle opening and vehicle speed.
Refer to
XX-XX, "*****"
.
Does A/T shift from D
2
to D
3
at the specified speed?
YES
>> GO TO 4.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-148, "A/T Does Not Shift: D
• Continue “Road Test”.
4.
CHECK SHIFT-UP (D
3
TO D
4
) AND ENGINE BRAKE
Release accelerator pedal after shifting from D
2
to D
3
.
Read gear position, throttle opening and vehicle speed.
Refer to
XX-XX, "*****"
.
Does A/T shift from D
3
to D
4
and does vehicle decelerate by engine
brake?
YES
>> 1.
Stop vehicle.
2.
Go to
TM-186, "Cruise Test - Part 3"
.
NO
>> • Mark the box on the
XX-XX, "*****"
.
• GO TO
TM-149, "A/T Does Not Shift: D
• Continue “Road Test”.
Cruise Test - Part 3
INFOID:0000000001696174
1.
CHECK SHIFT-DOWN (D
4
TO D
3
) (WITH OVERDRIVE CONTROL SWITCH)
1.
Push overdrive control switch. (OD OFF indicator lamp is off.)
2.
Move selector lever to “D” position.
3.
Accelerate vehicle using half throttle to D
4
.
SCIA7192E
SAT960I
SAT405H
SAT812A
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст