Nissan Frontier D40. Manual — part 146
BRC-282
< ECU DIAGNOSIS >
[TYPE 3]
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
Fail-Safe
INFOID:0000000005275372
CAUTION:
If the Fail-Safe function is activated, perform Self Diagnosis for ABS/TCS/VDC system.
ABS/EBD SYSTEM
ABFIA0283GB
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
BRC-283
< ECU DIAGNOSIS >
[TYPE 3]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
In case of an electrical malfunction with the ABS, the ABS warning lamp, VDC OFF indicator lamp and SLIP
indicator lamp will turn on. In case of an electrical malfunction with the EBD system, the BRAKE warning lamp,
ABS warning lamp, VDC OFF indicator lamp and SLIP indicator lamp will turn on.
The system will revert to one of the following conditions of the Fail-Safe function.
1.
For ABS malfunction, only the EBD is operative and the condition of the vehicle is the same condition of
vehicles without ABS/TCS/VDC system.
2.
For EBD malfunction, the EBD and ABS become inoperative, and the condition of the vehicle is the same
as the condition of vehicles without ABS/TCS/VDC or EBD system.
HILL DESCENT CONTROL/HILL START ASSIST SYSTEM
In case of hill descent control system malfunction, the hill descent control indicator lamp will remain off even
though the hill descent control switch is operated and the condition of the vehicle is the same as the condition
of vehicles without hill descent control system.
In case of hill start assist system malfunction, the VDC OFF and SLIP indicator lamps are turned on and the
condition of the vehicle is the same as the condition of vehicles without hill start assist system.
VDC/TCS SYSTEM
In case of TCS/VDC system malfunction, the VDC OFF indicator lamp and SLIP indicator lamp are turned on
and the condition of the vehicle is the same as the condition of vehicles without TCS/VDC system. In case of
an electrical malfunction with the TCS/VDC system, the ABS control continues to operate normally without
TCS/VDC control.
DTC No. Index
INFOID:0000000005275373
DTC
Items (CONSULT screen terms)
Reference
C1101
RR RH SENSOR-1
C1102
RR LH SENSOR-1
C1103
FR RH SENSOR-1
C1104
FR LH SENSOR-1
C1105
RR RH SENSOR-2
C1106
RR LH SENSOR-2
C1107
FR RH SENSOR-2
C1108
FR LH SENSOR-2
C1109
BATTERY VOLTAGE [ABNORMAL]
C1110
CONTROLLER FAILURE
C1111
PUMP MOTOR
C1113
G-SENSOR
C1115
ABS SENSOR [ABNORMAL SIGNAL]
C1116
STOP LAMP SW
C1120
FR LH IN ABS SOL
C1121
FR LH OUT ABS SOL
C1122
FR RH IN ABS SOL
C1123
FR RH OUT ABS SOL
C1124
RR LH IN ABS SOL
C1125
RR LH OUT ABS SOL
C1126
RR RH IN ABS SOL
C1127
RR RH OUT ABS SOL
BRC-284
< ECU DIAGNOSIS >
[TYPE 3]
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
C1130
ENGINE SIGNAL 1
C1131
ENGINE SIGNAL 2
C1132
ENGINE SIGNAL 3
C1133
ENGINE SIGNAL 4
C1136
ENGINE SIGNAL 6
C1140
ACTUATOR RLY
C1143
ST ANG SEN CIRCUIT
C1144
ST ANG SEN SIGNAL
C1145
YAW RATE SENSOR
C1146
SIDE G-SEN CIRCUIT
C1155
BR FLUID LEVEL LOW
C1156
ST ANG SEN COM CIR
C1160
DECEL G SEN SET
C1163
ST ANGL SEN SAFE
C1164
CV1
C1165
CV2
C1166
SV1
C1167
SV2
C1170
VARIANT CODING
C1187
ABS DIFLOCK CONTROLLER NG
U1000
CAN COMM CIRCUIT
DTC
Items (CONSULT screen terms)
Reference
APPLICATION NOTICE
BRC-285
< SYMPTOM DIAGNOSIS >
[TYPE 3]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
SYMPTOM DIAGNOSIS
APPLICATION NOTICE
Application Notice
INFOID:0000000005548024
Service information
Remarks
TYPE 1
ABS
TYPE 2
VDC/TCS/ABS
TYPE 3
HILL DESCENT CONTROL/HILL START ASSIST/VDC/TCS/ABS
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст