Nissan Frontier D40. Manual — part 276
FRONT DRIVE SHAFT
DLN-125
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TX15B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
FRONT DRIVE SHAFT
Disassembly and Assembly
INFOID:0000000005275491
DISASSEMBLY
1.
Remove the front bearing using Tools.
2.
Remove the rear bearing using Tools.
INSPECTION AFTER DISASSEMBLY
Front Drive Shaft
Check the items below. If necessary, replace them with new ones.
• Damage, peeling, dent, uneven wear and bending of the shaft.
• Excessive wear, damage and peeling of the gear.
Bearing
Check the bearing for damage and rough rotation. If necessary,
replace the bearing with a new one.
ASSEMBLY
Tool number
A: ST35300000 (
—
)
B: ST30021000 (J-22912-01)
SDIA2106E
Tool number
A: ST33710000 (
—
)
B: ST30021000 (J-22912-01)
PDIA0153E
PDIA0154E
MTF0041D
DLN-126
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TX15B]
FRONT DRIVE SHAFT
1.
Install the rear bearing using Tools.
2.
Install the front bearing using Tools.
Tool number
A: KV38100500 (
—
)
B: ST30901000 (J-26010-01)
PDIA0155E
Tool number
A: KV38100500 (
—
)
B: ST30901000 (J-26010-01)
PDIA0156E
SHIFT CONTROL
DLN-127
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TX15B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
SHIFT CONTROL
Disassembly and Assembly
INFOID:0000000005612375
DISASSEMBLY (A/T MODELS)
1.
Remove the snap ring.
2.
Remove the retaining pin.
3.
Remove the drum cam from the control shift rod.
4.
Remove the retaining pin from the L-H shift rod.
5.
Remove the 2-4 shift bracket.
6.
Remove the retaining ring from the 2-4 shift fork, using suitable
tool.
7.
Remove the fork guide collar and 2-4 shift fork spring from the 2-
4 shift fork.
DISASSEMBLY (M/T MODELS)
1.
Remove the retaining ring from the 2-4 shift fork, using suitable
tool.
2.
Remove the fork guide collar and 2-4 shift fork spring from the 2-
4 shift fork.
INSPECTION AFTER DISASSEMBLY
Shift Fork
PDIA0122E
PDIA0125E
WDIA0226E
WDIA0226E
DLN-128
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TX15B]
SHIFT CONTROL
• Measure the clearance between the shift fork and sleeve. If it is out
of specification, replace it with a new one.
Shift Rod and Fork Components
• Check the working face of the shift rod and fork for wear, partial
wear, abrasion, bending and other abnormality. If any is found,
replace with a new one.
ASSEMBLY (A/T MODELS)
1.
Install clevis pin and shift collar to L-H shift fork after assembling them.
CAUTION:
Use caution when installing L-H shift fork, clevis pin or shift collar.
2.
Install clevis pin and shift collar to 2-4 shift bracket after assembling them.
CAUTION:
Use caution when installing 2-4 shift bracket.
3.
Install the fork guide collar and 2-4 shift fork spring to the 2-4
shift fork, and then secure it with the retaining ring.
CAUTION:
• Do not reuse retaining ring.
• Be careful with orientation.
4.
Install the 2-4shift bracket to the L-H shift rod.
5.
Install the retaining pin evenly to the L-H shift rod.
CAUTION:
Do not reuse retaining pin.
Standard value
2-4
: Refer to
DLN-130, "Inspection and Adjust-
L-H
: Refer to
DLN-130, "Inspection and Adjust-
PDIA0134E
PDIA0135E
SDIA3391E
PDIA0125E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст