Nissan Frontier D40. Manual — part 668
STOP LAMP
EXL-145
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
STOP LAMP
Bulb Replacement
INFOID:0000000005274791
HIGH-MOUNTED STOP LAMP
Removal
1.
Remove high-mounted stop lamp. Refer to
EXL-145, "Removal and Installation"
2.
Rotate the center bulb socket counterclockwise to release from
high-mounted stop lamp assembly.
3.
Pull bulb straight out from bulb socket.
Installation
Installation is in the reverse order of removal.
Removal and Installation
INFOID:0000000005274792
HIGH-MOUNTED STOP LAMP
Removal
1.
Remove plugs on headlining.
2.
Remove the nuts and remove high-mounted stop lamp from out-
side of roof outer panel.
3.
Rotate the bulb sockets counterclockwise and remove the high-
mounted stop lamp assembly.
Installation
Installation is in the reverse order of removal.
WKIA3545E
WKIA3782E
High-mounted stop lamp nuts
: 3.38 N·m (0.34 kg-m, 30 in-lb)
EXL-146
< ON-VEHICLE REPAIR >
LICENSE PLATE LAMP
LICENSE PLATE LAMP
Bulb Replacement
INFOID:0000000005274793
REMOVAL
1.
Turn bulb socket counterclockwise to unlock bulb socket.
2.
Pull bulb to remove from bulb socket.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
INFOID:0000000005274794
REMOVAL
1.
Disconnect license plate lamp harness.
2.
Depress tab to remove license plate lamp from rear bumper.
INSTALLATION
Installation is in the reverse order of removal.
REAR COMBINATION LAMP
EXL-147
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REAR COMBINATION LAMP
Bulb Replacement
INFOID:0000000005274795
REMOVAL
1.
Remove rear combination lamp. Refer to
2.
Turn bulb counterclockwise to remove bulb socket.
3.
Pull bulb straight out away from socket to release.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
INFOID:0000000005274796
REMOVAL
1.
Open tailgate and remove rear combination lamp bolts.
2.
Pull combination lamp housing rearward to release locating
snap.
3.
Rotate each bulb socket counterclockwise to unlock it from lamp
housing and remove from vehicle.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
During installation, align locating snap on body prior to installing bolts.
WKIA3780E
WKIA3781E
Rear combination lamp bolts
: 2.4 Nm (0.24 kg-m, 21 in-lb)
EXL-148
< ON-VEHICLE REPAIR >
LIGHTING & TURN SIGNAL SWITCH
LIGHTING & TURN SIGNAL SWITCH
Removal and Installation
INFOID:0000000005274797
REMOVAL
1.
Remove lower instrument panel LH. Refer to
2.
Remove knee protector brace.
3.
Remove steering column cover.
4.
Disconnect the lighting and turn signal switch connector.
5.
While pressing tabs, pull lighting and turn signal switch toward
driver door and release from the steering column.
INSTALLATION
Installation is in the reverse order of removal.
LKIA0013E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст