Nissan Frontier D40. Manual — part 1079
TM-214
< COMPONENT DIAGNOSIS >
[5AT: RE5R05A]
A/T SHIFT LOCK SYSTEM
A/T SHIFT LOCK SYSTEM
Description
INFOID:0000000005550165
Wiring Diagram - A/T SHIFT LOCK SYSTEM -
INFOID:0000000005274153
ABDWA0179GB
A/T SHIFT LOCK SYSTEM
TM-215
< COMPONENT DIAGNOSIS >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Diagnosis Procedure
INFOID:0000000005274154
Regarding Wiring Diagram information, refer to
TM-214, "Wiring Diagram - A/T SHIFT LOCK SYSTEM -"
1.
CHECK KEY INTERLOCK CABLE
ABDIA0411GB
TM-216
< COMPONENT DIAGNOSIS >
[5AT: RE5R05A]
A/T SHIFT LOCK SYSTEM
Check key interlock cable for damage.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair key interlock cable. Refer to
TM-290, "Removal and Installation"
.
2.
CHECK SELECTOR LEVER
Check selector lever for damage. Refer to
TM-277, "Inspection and Adjustment"
.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair selector lever. Refer to
.
3.
CHECK INPUT SIGNAL
1.
Turn ignition switch ON.
2.
Check voltage between A/T shift selector connector M156 termi-
nal 1 and ground.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> GO TO 4.
4.
CHECK STOP LAMP SWITCH
1.
Turn ignition switch OFF.
2.
Disconnect stop lamp switch connector.
3.
Check continuity between stop lamp switch terminals 3 and 4.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace damaged parts.
5.
CHECK GROUND CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect A/T shift selector connector.
3.
Check continuity between A/T shift selector connector M156 ter-
minal 2 and ground.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair harness or connectors.
6.
CHECK PARK POSITION SWITCH AND SHIFT LOCK SOLENOID
Brake pedal depressed
: Battery voltage
Brake pedal released
: 0V
AWDIA0583ZZ
Brake pedal depressed
: Continuity should exist
Brake pedal released
: Continuity should not exist
AWDIA0419ZZ
Continuity should exist.
AWDIA0584ZZ
A/T SHIFT LOCK SYSTEM
TM-217
< COMPONENT DIAGNOSIS >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
Check continuity between A/T shift selector terminals 1 and 2.
Is the inspection result normal?
YES
>> Inspection End
NO
>> Replace A/T shift selector. Refer to
.
Selector lever in “P” position
: Continuity should
exist
Except above
: Continuity should
not exist
AWDIA0585ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст