Nissan Frontier D40. Manual — part 778
ILLUMINATION
INL-67
< ON-VEHICLE REPAIR >
[WITH POWER DOOR LOCKS]
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
ILLUMINATION
Removal and Installation
INFOID:0000000005272835
ILLUMINATION CONTROL SWITCH
Removal
The illumination control switch is replaced as a part of the combina-
tion meter assembly. Refer to
MWI-95, "Removal and Installation"
Installation
Installation is in the reverse order of removal.
A/T FINISHER LAMP
Removal
1.
Remove A/T finisher from center console. Refer to
.
2.
Rotate A/T finisher lamp socket (2) with bulb (3) counterclock-
wise, then pull away from finisher (1).
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1.
Remove A/T finisher from center console. Refer to
.
2.
Remove A/T finisher lamp socket (1), then pull bulb (2) straight
out away from socket.
LKIA0579E
ALLIA0590ZZ
AT finisher lamp bulb
: 12V - 3W
ALLIA0321ZZ
INL-68
< SERVICE DATA AND SPECIFICATIONS (SDS)
[WITH POWER DOOR LOCKS]
BULB SPECIFICATIONS
SERVICE DATA AND SPECIFICATIONS (SDS)
BULB SPECIFICATIONS
Interior Lamp/Illumination
INFOID:0000000005272836
*: Always check with the Parts Department for the latest parts information.
Item
Wattage (W)*
Map lamp
8
Vanity lamp
*
Glove box lamp
3.4
Room lamp
8
A/T finisher lamp
3
DIAGNOSIS AND REPAIR WORKFLOW
INL-69
< BASIC INSPECTION >
[WITHOUT POWER DOOR LOCKS]
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000005550764
OVERALL SEQUENCE
AWLIA1661GB
INL-70
< BASIC INSPECTION >
[WITHOUT POWER DOOR LOCKS]
DIAGNOSIS AND REPAIR WORKFLOW
DETAILED FLOW
1.
INTERVIEW FOR MALFUNCTION
Find out what the customer's concerns are.
>> GO TO 2
2.
SYMPTOM CHECK
Verify the symptom from the customer's information.
>> GO TO 3
3.
BASIC INSPECTION
Check the operation of each part. Check that any concerns occur other than those mentioned in the customer
interview.
>> GO TO 4
4.
SELF-DIAGNOSIS WITH CONSULT-III
Perform the self-diagnosis with CONSULT-III. Check that any DTC is detected.
Is any DTC detected?
YES
>> GO TO 5
NO
>> GO TO 6
5.
TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
>> GO TO 9
6.
FAIL-SAFE ACTIVATION CHECK
Determine if the customer’s concern is related to fail-safe activation.
Does the fail-safe activate?
YES
>> GO TO 7
NO
>> GO TO 8
7.
SYSTEM DIAGNOSIS
Perform the system diagnosis for the system in which the fail-safe activates. Specify the malfunctioning part.
>> GO TO 9
8.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
>> GO TO 9
9.
MALFUNCTION PART REPAIR
Repair or replace the malfunctioning part.
>> GO TO 10
10.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT-III)
Perform the self-diagnosis with CONSULT-III. Verify that no DTCs are detected. Erase all DTCs detected prior
to the repair. Verify that DTC is not detected again.
Is any DTC detected?
YES
>> GO TO 5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст