Nissan Frontier (2022 year). Manual in english — page 15

Front and rear view

Guiding lines that indicate the approximate
vehicle width and distance to objects with
reference to the vehicle body line

O

A

are

displayed on the monitor.

Distance guide lines:

Indicate distances from the vehicle body:
• Red line

O

1

: approximately 1.5 ft (0.5 m)

• Yellow line

O

2

: approximately 3ft (1 m)

• Green line

O

3

: approximately 7 ft (2 m)

• Green line

O

4

: approximately 10 ft (3 m) (if

so equipped)

Vehicle width guide lines

O

5

Indicate the approximate vehicle width
when backing up.

Predicted course lines

O

6

Indicate the predicted course when oper-
ating the vehicle. The predicted course
lines will be displayed on the monitor when
the steering wheel is turned. The predicted
course lines will move depending on how
much the steering wheel is turned and will
not be displayed while the steering wheel is
in the straight-ahead position.

The front view will not be displayed when
the vehicle speed is above 6 mph (10 km/h).

NOTE:

When the monitor displays the front
view and the steering wheel turns about
90 degrees or less from the straight-
ahead position, both the right and left
predicted course lines

O

6

are displayed.

When the steering wheel turns about 90
degrees or more, a line is displayed only
on the opposite side of the turn.

SAA1840

Front view

SAA1896

Rear view

Monitor, climate, audio, phone and voice recognition systems

4-13

Bird’s-eye view

The bird's-eye view shows the overhead
view of the vehicle, which helps confirm the
vehicle position and the predicted course
to a parking space.

The vehicle icon

O

1

shows the position of

the vehicle. Note that the apparent dis-
tance between objects viewed in the
bird's-eye view may differ somewhat from
the actual distance to the vehicle.

The areas that the cameras cannot cover

O

2

are indicated in black.

After the ignition switched is placed in the
ON position, the non-viewable area

O

2

is

highlighted in yellow for 3 seconds after the
birds-eye view is displayed.

In addition, the non-viewable corners are
displayed in red and will blink for the first 3
seconds

O

3

to remind the driver to be

cautious.

WARNING

•

Objects in the bird's-eye view will ap-
pear further than the actual distance.

•

Tall objects, such as a curb or vehicle,
may be misaligned or not displayed
at the seam of the views.

•

Objects that are above the camera
cannot be displayed.

•

The view of the bird's-eye view may
be misaligned when the camera po-
sition alters.

•

A line on the ground may be mis-
aligned and is not seen as being
straight at the seam of the views. The
misalignment will increase as the
line proceeds away from the vehicle.

Front-side view

Guiding lines

Guiding lines that indicate the approximate
width and the front end of the vehicle are
displayed on the monitor.

The front-of-vehicle line

O

1

shows the front

part of the vehicle.

The side-of-vehicle line

O

2

shows the ap-

proximate vehicle width including the out-
side mirrors.

The extensions

O

3

of both the front

O

1

and

side

O

2

lines are shown with a green dotted

line.

LHA4264

LHA2652

4-14

Monitor, climate, audio, phone and voice recognition systems

Rear-wide view

The rear-wide view shows a wider area on
the entire screen and allows the checking
of the blind corners on right and left sides.
The rear-wide view displays an approxi-
mately 180-degree area. The predicted
course lines are not displayed when using
the rear-wide view.

Distance guide lines

Indicates distances from the vehicle body:
• Red line

O

1

: approximately 1.5 ft (0.5 m)

• Yellow line

O

2

: approximately 3 ft (1 m)

• Green line

O

3

: approximately 7 ft (2 m)

Vehicle width guide lines

O

4

Indicate the vehicle width when backing
up.

DIFFERENCE BETWEEN PREDICTED
AND ACTUAL DISTANCES

The displayed guidelines and their loca-
tions on the ground are for approximate
reference only. Objects on uphill or downhill
surfaces or projecting objects will be actu-
ally located at distances different from
those displayed in the monitor relative to
the guidelines (refer to illustrations). When
in doubt, turn around and view the objects
as you are backing up, or park and exit the
vehicle to view the positioning of objects
behind the vehicle.

Backing up on a steep uphill

When backing up the vehicle up a hill, the
distance guide lines and the vehicle width
guide lines are shown closer than the ac-
tual distance. Note that any object on the
hill is further than it appears on the
monitor.

LHA4819

Rear-wide view

LHA5516

Monitor, climate, audio, phone and voice recognition systems

4-15

Backing up on a steep downhill

When backing up the vehicle down a hill,
the distance guide lines and the vehicle
width guide lines are shown farther than
the actual distance. Note that any object
on the hill is closer than it appears on the
monitor.

Backing up near a projecting
object

The vehicle may seem to nearly clear the
object in the display. However, the vehicle
may hit the object if it projects over the
actual backing up course.

Backing up behind a projecting
object

The position

O

C

is shown farther than the

position

O

B

in the display. However, the po-

sition

O

C

is actually at the same distance as

the position

O

A

. The vehicle may hit the

LHA5517

LHA4995

LHA5518

4-16

Monitor, climate, audio, phone and voice recognition systems

object when backing up to the position

O

A

if the object projects over the actual back-
ing up course.

HOW TO PARK WITH PREDICTED
COURSE LINES

WARNING

•

If the tires are replaced with different
sized tires, the predicted course lines
may be displayed incorrectly.

•

On a snow-covered or slippery road,
there may be a difference between
the predicted course line and the ac-
tual course line.

•

If the battery is disconnected or be-
comes discharged, the predicted
course lines may be displayed incor-
rectly. If this occurs, please perform
the following procedures:

–

Turn the steering wheel from lock
to

lock

while

the

engine

is

running.

–

Drive the vehicle on a straight road
for more than 5 minutes.

•

When the steering wheel is turned
with the ignition switch in the ACC
position, the predicted course lines
may be displayed incorrectly.

•

There is the possibility that when the
vehicle mirrors are extended for tow-
ing, the mirrors may be shown in the
bird's-eye view and front side view.

1. Visually check that the parking space is

safe before parking your vehicle.

2. The rear view of the vehicle is displayed

on the screen

O

A

when the shift lever is

moved to the R (Reverse) position.

LHA5043

Monitor, climate, audio, phone and voice recognition systems

4-17

3. Slowly back up the vehicle adjusting the

steering wheel so that the predicted
course lines

O

B

enter the parking space

O

C

.

4. Maneuver the steering wheel to make

the vehicle width guide lines

O

D

parallel

to the parking space

O

C

while referring

to the predicted course lines.

5. When the vehicle is parked in the space

completely, move the shift lever to the P
(Park) position and apply the parking
brake.

HOW TO SWITCH THE DISPLAY

With the ignition switch in the ON position,
press the CAMERA button or move the shift
lever to the R (Reverse) position to operate
the Intelligent Around View Monitor.

The Intelligent Around View Monitor dis-
plays different split screen views depend-
ing on the position of the shift lever. Press
the CAMERA button to switch between the
available views.

If the shift lever is in the R (Reverse) position,
the available views are:
• Rear view/bird’s-eye view split screen
• Rear view/front-side view split screen
• Rear-wide view

If the shift lever is in the P (Park) or D (Drive)
position, the available views are:
• Front view/bird’s-eye view split screen
• Front view/front-side view split screen

The display will switch from the Intelligent
Around View Monitor screen when:
• The shift lever is in the D (Drive) position

and the vehicle speed increases above
approximately 6 mph (10 km/h).

• A different screen is selected.

LHA4770

4-18

Monitor, climate, audio, phone and voice recognition systems

ADJUSTING THE SCREEN

1. Press the Menu button.

2. Touch the “Settings” key.

3. Touch the “Camera” key.

4. Touch the “Display Settings” key.

5. Touch the “Brightness”, “Contrast”, Tint”,

“Color”, or “Black Level” key.

6. Adjust the item by touching the “+” or “–”

key on the touch-screen display.

NOTE:

Do not adjust any of the display settings
of the Intelligent Around View Monitor
while the vehicle is moving. Make sure
the parking brake is firmly applied.

INTELLIGENT AROUND VIEW
MONITOR SYSTEM LIMITATIONS

LHA5379

LHA5520

Monitor, climate, audio, phone and voice recognition systems

4-19

WARNING

Listed below are the system limitations
for Intelligent Around View Monitor.
Failure to operate the vehicle in accor-
dance with these system limitations
could result in serious injury or death.

•

Do not use the Intelligent Around
View Monitor with the outside mir-
rors in the stored position, and make
sure that the tailgate is securely
closed when operating the vehicle
using the Intelligent Around View
Monitor.

•

The apparent distance between ob-
jects

viewed

on

the

Intelligent

Around View Monitor differs from the
actual distance.

•

The cameras are installed on the
front grille, the outside mirrors and
above the rear license plate. Do not
put anything on the vehicle that cov-
ers the cameras.

•

When washing the vehicle with high
pressure water, be sure not to spray it
around the cameras. Otherwise, wa-
ter may enter the camera unit caus-
ing water condensation on the lens, a
malfunction, fire or an electric shock.

•

Do not strike the cameras. They are
precision

instruments.

Doing

so

could cause a malfunction or cause
damage resulting in a fire or an elec-
tric shock.

There are some areas where the system
will not show objects and the system does
not warn of moving objects. When in the
front or rear view display, an object below
the bumper or on the ground may not be
viewed

O

1

. When in the bird’s-eye view, a tall

object near the seam

O

2

of the camera

viewing areas will not appear in the
monitor.

The following are operating limitations and
do not represent a system malfunction:
• There may be a delay when switching

between views.

• When the temperature is extremely high

or low, the screen may not display objects
clearly.

• When strong light directly shines on the

camera, objects may not be displayed
clearly.

• The screen may flicker under fluorescent

light.

• The colors of objects on the Intelligent

Around View Monitor may differ some-
what from the actual color of objects.

• Objects on the Intelligent Around View

Monitor may not be clear and the color of
the

object

may

differ

in

a

dark

environment.

• There may be differences in sharpness

between each camera view of the bird's-
eye view.

• Do not use wax on the camera lens. Wipe

off any wax with a clean cloth that has
been dampened with a diluted mild
cleaning agent, then wipe with a dry
cloth.

4-20

Monitor, climate, audio, phone and voice recognition systems

System temporarily unavailable

When the “!” icon is displayed on the screen,
there are abnormal conditions in the Intel-
ligent Around View Monitor. This will not
hinder normal driving operation but it is
recommended that the system be in-
spected. It is recommended that you visit a
NISSAN dealer for this service.

When the “[X]” icon is displayed on the
screen, the camera image may be receiv-
ing temporary electronic disturbances
from surrounding devices. This will not hin-
der normal driving operation but it is rec-
ommended that the system be inspected
if it occurs frequently. It is recommended
that you visit a NISSAN dealer for this
service.

SYSTEM MAINTENANCE

CAUTION

•

Do not use alcohol, benzine or thin-
ner to clean the camera. This will
cause discoloration.

•

Do not damage the cameras as the
monitor screen may be adversely
affected.

If dirt, rain or snow accumulates on any of
the cameras

O

1

, the Intelligent Around

View Monitor may not display objects
clearly. Clean the camera by wiping with a
cloth dampened with a diluted mild clean-
ing agent and then wiping with a dry cloth.

LHA3591

LHA3592

LHA5519

Monitor, climate, audio, phone and voice recognition systems

4-21

1. CAMERA button

WARNING

•

Failure to follow the warnings and in-
structions for proper use of the Mov-
ing Object Detection system could
result in serious injury or death.

•

The MOD system is not a substitute
for proper vehicle operation and is
not designed to prevent contact with
objects

surrounding

the

vehicle.

When maneuvering, always use the
outside mirrors and rearview mirror
and turn and check the surroundings
to ensure it is safe to maneuver.

•

The system is deactivated at speeds
above 6 mph (10 km/h). It is reacti-
vated at lower speeds.

•

The MOD system is not designed to
detect

surrounding

stationary

objects.

LHA5514

MOVING OBJECT DETECTION (MOD)
(if so equipped)

4-22

Monitor, climate, audio, phone and voice recognition systems

The MOD system can inform the driver of
moving objects near the vehicle when
backing out of garages, maneuvering in
parking lots and in other such instances.

The MOD system detects moving objects
by using image processing technology on
the image shown in the display.

MOD SYSTEM OPERATION

The MOD system will turn on automatically
under the following conditions:
• When the shift lever is in the R (Reverse)

position.

• When vehicle speed decreases below ap-

proximately 10 km/h (6 mph) and the
camera screen is displayed.

The MOD system operates in the following
conditions when the camera view is
displayed:
• When the shift lever is in the P (Park) or N

(Neutral) position and the vehicle is
stopped, the MOD system detects mov-
ing objects in the bird’s-eye view. The
MOD system will not operate if the out-
side mirrors are moving in or out, in the
stowed position, or if either front door is
opened.

• When the shift lever is in the D (Drive)

position and the vehicle speed is below
approximately 6 mph (10 km/h), the MOD
system detects moving objects in the
front view.

• When the shift lever is in the R (Reverse)

position and the vehicle speed is below
approximately 6 mph (10 km/h), the MOD
system detects moving objects in the
rear view. The MOD system will not oper-
ate if the tailgate is open.

LHA4190

Front and bird’s-eye views

LHA5171

Rear and bird’s-eye views

Monitor, climate, audio, phone and voice recognition systems

4-23

The MOD system does not detect moving
objects in the front-side view. The MOD
icon is not displayed on the screen when in
this view.

When the MOD system detects moving ob-
jects near the vehicle, a chime will be heard
and a yellow frame will be displayed on the
view where the objects are detected. While
the MOD system continues to detect mov-
ing objects, the yellow frame continues to
be displayed.

NOTE:

While the RCTA chime is beeping, the
MOD system will not chime.

In the bird’s-eye view, the yellow frame

O

1

is

displayed on each camera image (front,
rear, right, left) depending on where mov-
ing objects are detected.

The yellow frame

O

2

is displayed on each

view in the front view and rear view modes.

A blue MOD icon

O

3

is displayed in the view

where the MOD system is operative. A gray
MOD icon is displayed in the view where the
MOD system is not operative.

If the MOD system is turned off, the MOD
icon

O

3

is not displayed.

TURNING MOD ON AND OFF (if so
equipped)

Some vehicles include the option to allow
the MOD system to be turned on or off.

To turn the MOD system on or off:

1. Press the

or

button on the

steering wheel and select “Settings” in
the vehicle information display.

2. Using the

buttons, select “Driver

Assistance” and press the ENTER button.

3. Select “Parking Aids”.

4. Toggle ON or OFF “Moving Object” using

the ENTER button.

MOD SYSTEM LIMITATIONS

WARNING

Listed below are the system limitations
for MOD. Failure to operate the vehicle
in accordance with these system limi-
tations could result in serious injury or
death.

•

Do not use the MOD system when
towing a trailer. The system may not
function properly.

LHA4997

Rear and front-side views

LHA4998

Rear-wide view

4-24

Monitor, climate, audio, phone and voice recognition systems

•

Excessive noise (for example, audio
system volume or open vehicle win-
dow) will interfere with the chime
sound, and it may not be heard.

•

The MOD system performance will be
limited according to environmental
conditions and surrounding objects
such as:

–

When there is low contrast be-

tween background and the mov-
ing objects.

–

When there is a blinking source of

light.

–

When strong light such as another

vehicle’s headlight or sunlight is
present.

–

When camera orientation is not in

its usual position, such as when a
mirror is folded.

–

When there is dirt, water drops or

snow on the camera lens.

–

When the position of the moving

objects in the display is not
changed.

•

The MOD system might detect flow-
ing water droplets on the camera
lens, white smoke from the muffler,
moving shadows, etc.

•

The MOD system may not function
properly depending on the speed, di-
rection, distance or shape of the
moving objects.

•

If your vehicle sustains damage to
the parts where the camera is in-
stalled, leaving it misaligned or bent,
the sensing zone may be altered and
the MOD system may not detect ob-
jects properly.

•

When the temperature is extremely
high or low, the screen may not dis-
play objects clearly. This is not a
malfunction.

NOTE:
The blue MOD icon will change to or-
ange if one of the following has oc-
curred:

• When the system is malfunctioning.
• When the component temperature

reaches a high level (icon will blink).

• When the Rear View camera has de-

tected a blockage (icon will blink).

If the icon light continues to illuminate
orange, have the MOD system checked. It
is recommended that you visit a NISSAN
dealer for this service.

SYSTEM MAINTENANCE

CAUTION

•

Do not use alcohol, benzine or thin-
ner to clean the camera. This will
cause discoloration.

•

Do not damage the camera as the
monitor screen may be adversely
affected.

If dirt, rain or snow accumulates on any of
the cameras

O

1

, the MOD system may not

operate properly. Clean the camera by wip-
ing with a cloth dampened with a diluted
mild cleaning agent and then wiping with a
dry cloth.

LHA5519

Monitor, climate, audio, phone and voice recognition systems

4-25

Adjust air flow direction for the driver and
passenger’s side vents or center vents

O

2

by moving the vent slide and/or vent as-
semblies. Open or close the driver, passen-
ger and center vents by using the dial. The
defrost vents

O

1

located above the driver

and passenger side vents cannot be ad-
justed or closed.

WARNING

•

The air conditioner cooling function
operates only when the engine is
running.

•

Do not leave children or adults who
would normally require the assis-
tance of others alone in your vehicle.
Pets should also not be left alone.
They could accidentally injure them-
selves or others through inadvertent
operation of the vehicle. Also, on hot,
sunny days, temperatures in a closed
vehicle could quickly become high
enough to cause severe or possibly
fatal injuries to people or animals.

•

Do not use the recirculation mode for
long periods as it may cause the inte-
rior air to become stale and the win-
dows to fog up.

NOTE:

• Odors from inside and outside the ve-

hicle can build up in the air conditioner
unit. Odor can enter the passenger
compartment through the vents.

• When parking, set the heater and air

conditioner controls to turn off air re-
circulation to allow fresh air into the
passenger compartment. This should
help reduce odors inside the vehicle.

LHA5496

VENTS

HEATER AND AIR CONDITIONER
(manual) (if so equipped)

4-26

Monitor, climate, audio, phone and voice recognition systems

CONTROLS

1.

Fan speed control dial / system

OFF dial / A/C (air conditioning) button

2. Air flow control buttons

3. Temperature control dial / MAX A/C

button

4.

Air recirculation button

5.

Front windshield defrost button

Fan speed control dial

The

fan speed control dial turns the

fan on and off and controls fan speed.

Fan speed control dial — OFF mode

Setting the

fan speed control dial to the

off position will turn off the fan and the air
recirculation indicator light will turn on. To
get fresh air in fan off mode, press the
air recirculation button to turn off the indica-
tor. In fan off mode, the mode buttons can be
selected to change the air vent distribution
(if the air recirculation mode is off).

Air flow control buttons

The air flow control buttons allow you to
select the air flow outlets.

MAX
A/C

—

Air flows from center and side
vents with maximum cooling.

—

Air flows from center and side
vents.

—

Air flows from center and side
vents and foot outlets.

—

Air flows mainly from foot out-
lets and side vents.

—

Air flows from defroster outlets
and foot outlets.

—

Air flows mainly from defroster
outlets.

LHA5528

Monitor, climate, audio, phone and voice recognition systems

4-27

Temperature control dial

The temperature control dial allows you to
adjust the temperature of the outlet air. To
lower the temperature, turn the dial to the
left. To increase the temperature, turn the
dial to the right.

Air recirculation button

ON position (Indicator light on)

Interior air is recirculated inside the vehicle.

Press the

button to the ON position

when:
• driving on a dusty road.
• to prevent traffic fumes from entering

passenger compartment.

• for maximum cooling when using the air

conditioner.

OFF position (Indicator light off)

If outside air is desired in off mode, press
the recirculation button until the indicator
turns off.

If fogging occurs, press the

front

windshield defrost button.

A/C (air conditioner) button

Start the engine, turn the

fan speed

control dial to the desired position and
press the

button to turn on the air

conditioner. To turn off the air conditioner,
press the

button again.

The air conditioner cooling function op-
erates only when the engine is running.

HEATER OPERATION

Heating

This mode is used to direct heated air to
the foot outlets. Some air also flows from
the defrost outlets.

1. Press the

button to the OFF posi-

tion for normal heating. The indicator
light on the

button will go off.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to the

desired position between the middle
and the hot position.

Ventilation

This mode directs outside air to the side
and center vents.

1. Press the

button to the off position.

The indicator light on the

button

will go off.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to the

desired position.

Defrosting or defogging

This mode directs the air to the defrost
outlets to defrost/defog the windows.

1. Press the

defrost/defog button.

2. Turn the

fan speed control dial to

the desired position.

3. Turn the temperature control dial to the

desired position between the middle
and the hot position.

• To quickly remove ice or fog from the win-

dows, turn the

fan speed control dial

to the highest setting and the tempera-
ture control to the full HOT position.

4-28

Monitor, climate, audio, phone and voice recognition systems