Nissan Frontier. Manual — part 38
AV-144
< PRECAUTION >
[DISPLAY AUDIO WITHOUT AMPLIFIER]
PRECAUTIONS
• Do not perform bypass wire connections for the repair parts. (The
spliced wire will become separated and the characteristics of
twisted line will be lost.)
Precaution for Work
INFOID:0000000009482124
• When removing or disassembling each component, be careful not to damage or deform it. If a component
may be subject to interference, be sure to protect it with a shop cloth.
• When removing (disengaging) components with a screwdriver or similar tool, be sure to wrap the component
with a shop cloth or vinyl tape to protect it.
• Protect the removed parts with a shop cloth and prevent them from being dropped.
• Replace a deformed or damaged clip.
• If a part is specified as a non-reusable part, always replace it with a new one.
• Be sure to tighten bolts and nuts securely to the specified torque.
• After installation is complete, be sure to check that each part works properly.
• Follow the steps below to clean components:
- Water soluble dirt:
• Dip a soft cloth into lukewarm water, wring the water out of the cloth and wipe the dirty area.
• Then rub with a soft, dry cloth.
- Oily dirt:
• Dip a soft cloth into lukewarm water with mild detergent (concentration: within 2 to 3%) and wipe the dirty
area.
• Then dip a cloth into fresh water, wring the water out of the cloth and wipe the detergent off.
• Then rub with a soft, dry cloth.
- Do not use organic solvent such as thinner, benzene, alcohol or gasoline.
- For genuine leather seats, use a genuine leather seat cleaner.
PKIA0307E
AV
PREPARATION
AV-145
< PREPARATION >
[DISPLAY AUDIO WITHOUT AMPLIFIER]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000009482125
The actual shape of the tools may differ from those illustrated here.
Commercial Service Tools
INFOID:0000000009482126
Tool number
(TechMate No.)
Tool name
Description
—
(J-46534)
Trim Tool Set
Removing trim components
AWJIA0483ZZ
Tool name
Description
Power tool
Loosening nuts, screws and bolts
PIIB1407E
AV-146
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO WITHOUT AMPLIFIER]
AUDIO UNIT
REMOVAL AND INSTALLATION
AUDIO UNIT
Removal and Installation
INFOID:0000000009482127
REMOVAL
1. Disconnect the negative battery terminal. Refer to
PG-83, "Removal and Installation"
2. Remove cluster lid C. Refer to
IP-19, "Removal and Installation"
3. Remove the screws (A) from the bracket.
4. Remove the audio unit (1) from cluster lid C.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA2930ZZ
AV
FRONT TWEETER
AV-147
< REMOVAL AND INSTALLATION >
[DISPLAY AUDIO WITHOUT AMPLIFIER]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FRONT TWEETER
Removal and Installation
INFOID:0000000009482128
REMOVAL
1. Remove the front tweeter grille.
2. Remove the front tweeter screws (A).
3. Pull out the front tweeter (1), then disconnect the harness con-
nector from the front tweeter and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALNIA1074ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст