Nissan Frontier. Manual — part 952
INT-14
< SYMPTOM DIAGNOSIS >
SQUEAK AND RATTLE TROUBLE DIAGNOSES
LAIA0071E
DOOR FINISHER
INT-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REMOVAL AND INSTALLATION
DOOR FINISHER
Removal and Installation
INFOID:0000000009480044
FRONT DOOR
Removal
1. Remove window crank handle or power window/door lock switch (if equipped). Refer to
PWC-73, "Removal and Installation"
(RH).
2. Remove pull handle escutcheon.
3. Remove pull handle cover, then remove door finisher screw.
4. Remove armrest.
a. While pushing on the side of the armrest, pull up on the rear of the armrest releasing the lower fastening
points.
b. With the rear of the armrest pulled upward, pull the front of the armrest toward you and remove.
1.
Front door
2.
Mirror bolt cover
3.
Pull handle escutcheon
4.
Pull handle/lock lever assembly
5.
Front door handle bracket
6.
Pull handle cover
7.
Front door finisher (RH shown)
8.
Power window/door lock switch
9.
Armrest
A.
Clip C101
AWJIA0162GB
INT-16
< REMOVAL AND INSTALLATION >
DOOR FINISHER
5. Remove screws behind armrest.
6. Release clips and reposition front door finisher.
7. Remove pull handle/lock lever assembly.
8. Disconnect lock lever cable and pull handle cable from lever assembly. Refer to
.
9. Remove front door finisher.
Installation
Installation is in the reverse order of removal.
REAR DOOR - CREW CAB
Removal
1. Remove window crank handle or rear power window switch (if equipped). Refer to
2. Remove pull handle cover.
• Remove screw behind pull handle cover.
3. Remove pull handle escutcheon.
4. Lift upward to release clips and remove armrest.
5. Remove screws behind armrest.
6. Release the clips and remove rear door finisher.
• Disconnect the harness connector from rear tweeter, then remove the rear tweeter screws and the rear
tweeter.
1.
Rear door
2.
Rear tweeter
3.
Pull handle/lock lever assembly
4.
Pull handle escutcheon
5.
Pull handle cover
6.
Metal clip
7.
Power window switch assembly
8.
Armrest
9.
Rear door finisher (RH shown)
10. Rear door handle bracket
A.
Clip C101
ALJIA0644GB
DOOR FINISHER
INT-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
7. Remove pull handle/lock lever assembly.
• Disconnect lock lever cable and pull handle cable from lever assembly. Refer to
Installation
Installation is in the reverse order of removal.
REAR DOOR - KING CAB
Removal
1. Remove lower seat belt anchor bolt. Refer to
SB-13, "Removal and Installation"
.
• Disconnect harness connector for passenger side.
2. Release the clips and remove rear door finisher.
3. Remove lock lever assembly.
• Disconnect lock lever cable and lever assembly. Refer to
DLK-141, "Removal and Installation"
Installation
Installation is in the reverse order of removal.
1.
Rear door
2.
Latch cover
3.
Guide
4.
Rear door finisher
5.
Metal clip
ALJIA0649ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст