Nissan Frontier. Manual — part 1218
CASE COMPONENTS
TM-83
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
CASE COMPONENTS
Disassembly
INFOID:0000000009480451
Case Components
1. Remove clips from PNP switch and back-up lamp switch.
2. Remove PNP switch, back-up lamp switch and plungers from
rear extension (or OD gear case).
3. Remove control housing bolts, and then remove control housing
and gasket from rear extension (or OD gear case).
4. Remove return spring plug, return spring and return spring
plunger from rear extension (or OD gear case).
CAUTION:
Do not reuse return spring plug.
5. Remove rear oil seal from OD gear case using Tool (for 4WD
models).
CAUTION:
Do not damage OD gear case.
PCIB1215E
PCIB1216E
PCIB1643E
Tool number
: KV381054S0 (J-34286)
PCIB1218E
TM-84
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
CASE COMPONENTS
6. Remove retaining pin using suitable tool, and then remove strik-
ing arm from striking rod assembly.
7. Remove rear extension (or OD gear case) bolts, and then
remove rear extension (or OD gear case) from adapter plate
using suitable tool.
8. Remove rear extension oil gutter bolt, and then remove rear
extension oil gutter and cap from rear extension. (For 2WD mod-
els)
9. Remove dust seal and rear oil seal from rear extension using
suitable tool. (For 2WD models)
CAUTION:
Be careful not to damage rear extension.
10. Remove counter end bearing from rear extension (or OD gear
case) using suitable tool.
CAUTION:
Be careful not to damage rear extension (or OD gear case).
PCIB1219E
PCIB1220E
PCIB1221E
PCIB1222E
PCIB1223E
CASE COMPONENTS
TM-85
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
11. Remove withdrawal lever ball pin and washer from front cover.
12. Remove front cover bolts, and then remove front cover and
front cover gasket from transmission case.
13. Remove front cover oil seal from front cover using suitable tool.
CAUTION:
Be careful not to damage front cover.
14. Remove baffle plate nut from transmission case.
15. Remove snap ring from main drive gear bearing using suitable
tool.
PCIB1224E
PCIB1225E
SCIA1399E
SCIA1443E
SCIA1532E
TM-86
< UNIT DISASSEMBLY AND ASSEMBLY >
[6MT: FS6R31A]
CASE COMPONENTS
16. Remove pivot bolt and check shift pin from transmission case.
CAUTION:
Do not reuse pivot bolt and check shift pin.
17. Remove transmission case from adapter plate.
18. Remove counter front bearing from transmission case.
19. Remove oil gutter from transmission case.
20. Remove filler plug and gasket from transmission case.
CAUTION:
Do not reuse gasket.
PCIB1226E
PCIB1227E
PCIB0436E
PCIB1228E
PCIB1229E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст