Nissan Frontier. Manual — part 278
DLN-14
< SYSTEM DESCRIPTION >
[TRANSFER: TX15B]
4WD SYSTEM
CAN Communication
INFOID:0000000009479629
.
Cross-Sectional View
INFOID:0000000009479630
4.
Transfer control device F58
5.
Transfer control unit M152, M153
(View with lower instrument panel LH
removed.)
6.
Park/neutral position switch F66
(M/T models)
7.
Combination meter M24
A: 4WD warning lamp
B: 4LO indicator lamp
C: 4WD shift indicator lamp
D: ATP warning lamp (A/T models)
8.
4WD shift switch M141
1.
Mainshaft
2.
Rear case
3.
Oil pump assembly
4.
Clutch gear
5.
2-4 shift fork
6.
2-4 sleeve
7.
Drive chain
8.
Sprocket
9.
L-H shift fork
10. L-H sleeve
11. Internal gear
12. Front case
13. Planetary carrier assembly
14. Sun gear assembly
15. L-H shift rod
16. Control shift rod A/T
17. Companion flange
18. Front drive shaft
19. Control shift rod M/T
20. Transfer control device
SDIA3418E
4WD SYSTEM
DLN-15
< SYSTEM DESCRIPTION >
[TRANSFER: TX15B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
Power Transfer
INFOID:0000000009479631
POWER TRANSFER DIAGRAM
POWER TRANSFER FLOW
1.
Mainshaft
2.
Clutch gear
3.
2-4 sleeve
4.
Drive chain
5.
Sprocket
6.
L-H sleeve
7.
Planetary carrier assembly
8.
Sun gear assembly
9.
Front drive shaft
WDIA0223E
DLN-16
< SYSTEM DESCRIPTION >
[TRANSFER: TX15B]
4WD SYSTEM
SDIA2213E
DIAGNOSIS SYSTEM (TRANSFER CONTROL UNIT)
DLN-17
< SYSTEM DESCRIPTION >
[TRANSFER: TX15B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
DIAGNOSIS SYSTEM (TRANSFER CONTROL UNIT)
CONSULT Function (ALL MODE AWD/4WD)
INFOID:0000000009479632
FUNCTION
CONSULT can display each diagnostic item using the following direct diagnostic modes.
SELF DIAGNOSTIC RESULT
Operation Procedure
1. Connect “CONSULT”.
2. With engine at idle, touch “SELF-DIAG RESULTS”.
Display shows malfunction experienced since the last erasing operation.
NOTE:
The details for "TIME" are as follows:
• "0": Error currently detected with transfer control unit.
• Except for "0": Error detected in the past and memorized with transfer control unit.
Detects frequency of driving after DTC occurs (frequency of turning ignition switch "ON/OFF").
How to Erase Self-diagnostic Results
1. Perform applicable inspection of malfunctioning item and then repair or replace.
2. Start engine and select “SELF-DIAG RESULTS” mode for “ALL MODE AWD/4WD” with CONSULT.
3. Touch “ERASE” on CONSULT screen to erase DTC memory.
CAUTION:
If memory cannot be erased, perform applicable diagnosis.
SELF-DIAGNOSTIC PROCEDURE (WITHOUT CONSULT)
Description
If the engine starts when there is something wrong with the 4WD system, the 4WD warning lamp turns ON or
flickers in the combination meter. When the system functions properly, the warning lamp turns ON when the
ignition switch is turned to “ON”, and it turns OFF after engine starts. To locate the cause of a problem, start
the self-diagnosis function. The 4WD warning lamp in the combination meter will indicate the problem area by
flickering according to the self-diagnostic results. Refer to
.
Diagnostic Procedure (A/T models)
1. Warm up engine.
2. Turn ignition switch “ON” and “OFF” at least twice, and then turn ignition switch “OFF”.
3. Move A/T selector lever to “P” position.
4. Turn 4WD shift switch to “2WD” position.
5. Turn ignition switch “ON”. (Do not start engine.)
6. 4WD warning lamp should turn ON.
If 4WD warning lamp does not turn ON, refer to
.
7. Move A/T selector lever to “R” position.
8. Turn 4WD shift switch to “2WD”, “4H” and “2WD” in order.
9. Move A/T selector lever to “P” position.
10. Turn 4WD shift switch to “4H”, “2WD” and “4H” in order.
11. Move A/T selector lever to “N” position.
12. Turn 4WD shift switch to “2WD” position.
13. Move A/T selector lever to “P” position.
14. Read the flickering of 4WD warning lamp.
Direct Diagnostic Mode
Description
Self Diagnostic Result
The transfer control unit self diagnostic results are displayed.
Data Monitor
The transfer control unit input/output data is displayed in real time.
CAN Diag Support Monitor
The result of transmit/receive diagnosis of CAN communication is displayed.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст