Nissan Frontier. Manual — part 1312
WCS
WARNING CHIME SYSTEM
WCS-43
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ABNIA5553GB
WCS-44
< SYMPTOM DIAGNOSIS >
THE LIGHT REMINDER WARNING DOES NOT SOUND
SYMPTOM DIAGNOSIS
THE LIGHT REMINDER WARNING DOES NOT SOUND
Description
INFOID:0000000009478020
Light reminder warning does not sound even though headlamp is illuminated.
Diagnosis Procedure
INFOID:0000000009478021
1.
CHECK COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) OPERATION
Check that the headlamps operate normally by operating the combination switch (lighting and turn signal
switch).
Do they operate normally?
YES
>> GO TO 2
NO
>> Refer to
2.
CHECK FRONT DOOR SWITCH LH SIGNAL CIRCUIT
Perform a unit inspection for the front door switch LH. Refer to
(Crew Cab) or
DLK-27, "KING CAB : Component Function Check"
(King Cab).
Is the inspection result normal?
YES
BCS-49, "Removal and Installation"
NO
>> Refer to
DLK-29, "CREW CAB : Diagnosis Procedure"
(King Cab).
WCS
THE SEAT BELT WARNING CONTINUES SOUNDING, OR DOES NOT SOUND
WCS-45
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
THE SEAT BELT WARNING CONTINUES SOUNDING, OR DOES NOT
SOUND
Description
INFOID:0000000009478022
• Seat belt warning does not sound even though driver seat belt is not fastened.
• Seat belt warning sounds even though driver seat belt is fastened.
Diagnosis Procedure
INFOID:0000000009478023
1.
CHECK WARNING CHIME OPERATION
1. With key removed from key switch and the front door LH open, turn lighting switch to 1st or 2nd position.
2. Return lighting switch to off position, and insert key into key switch.
Does warning chime sound for both steps?
YES
>> GO TO 2
NO
>> • If both light reminder warning and key warning do not sound, replace combination meter. Refer
MWI-90, "Removal and Installation"
• If the light reminder warning does not sound only, refert to
• If the key warning does not sound only, refert to
.
2.
CHECK SEAT BELT WARNING LAMP
1. Turn ignition switch ON.
2. Check the operation of the seat belt warning lamp in the combination meter.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-49, "Removal and Installation"
NO
>> GO TO 3
3.
CHECK SEAT BELT BUCKLE SWITCH LH CIRCUIT
Perform inspection of the seat belt buckle switch LH circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Repair harness or connector.
4.
CHECK SEAT BELT BUCKLE SWITCH LH
Perform a unit inspection for the seat belt buckle switch LH. Refer to
WCS-21, "Component Inspection"
Is the inspection result normal?
YES
>> Replace the combination meter. Refer to
MWI-90, "Removal and Installation"
.
NO
>> Replace the seat belt buckle switch LH. Refer to
SE-32, "Removal and Installation"
Seat belt fastened
: OFF
Seat belt not fastened
: ON
WCS-46
< SYMPTOM DIAGNOSIS >
THE KEY WARNING DOES NOT SOUND
THE KEY WARNING DOES NOT SOUND
Description
INFOID:0000000009478024
Key warning does not sound even though key is in ignition and front door LH is opened.
Diagnosis Procedure
INFOID:0000000009478025
1.
CHECK WARNING CHIME OPERATION
With key removed from the ignition and the front door LH open, turn the lighting switch to 1st or 2nd position.
Does warning chime sound?
YES
>> GO TO 2
NO
>> Replace combination meter. Refer to
MWI-90, "Removal and Installation"
2.
CHECK KEY SWITCH CIRCUIT
Perform inspection of the key switch circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair harness or connector.
3.
CHECK KEY SWITCH
Perform a unit inspection for the key switch. Refer to
WCS-23, "Component Inspection"
Is the inspection result normal?
YES
BCS-49, "Removal and Installation"
NO
>> Replace the key switch.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст