Nissan Frontier. Manual — part 935
BULB SPECIFICATIONS
INL-67
< SERVICE DATA AND SPECIFICATIONS (SDS)
[WITH POWER DOOR LOCKS]
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
SERVICE DATA AND SPECIFICATIONS (SDS)
BULB SPECIFICATIONS
Bulb Specifications
INFOID:0000000009480162
*: Always check with the Parts Department for the latest parts information.
Item
Wattage (W)*
Front room/map lamp
8
Vanity lamp
–
Room lamp 2nd row
8
Shift selector finisher lamp
3
INL-68
< BASIC INSPECTION >
[WITHOUT POWER DOOR LOCKS]
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000009480163
OVERALL SEQUENCE
AWLIA1837GB
DIAGNOSIS AND REPAIR WORKFLOW
INL-69
< BASIC INSPECTION >
[WITHOUT POWER DOOR LOCKS]
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
DETAILED FLOW
1.
INTERVIEW FOR MALFUNCTION
Find out what the customer's concerns are.
>> GO TO 2
2.
SYMPTOM CHECK
Verify the symptom from the customer's information.
>> GO TO 3
3.
BASIC INSPECTION
Check the operation of each part. Check that any concerns occur other than those mentioned in the customer
interview.
>> GO TO 4
4.
SELF-DIAGNOSIS WITH CONSULT
Perform the self-diagnosis with CONSULT. Check that any DTC is detected.
Is any DTC detected?
YES
>> GO TO 5
NO
>> GO TO 6
5.
TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
>> GO TO 9
6.
FAIL-SAFE ACTIVATION CHECK
Determine if the customer’s concern is related to fail-safe activation.
Does the fail-safe activate?
YES
>> GO TO 7
NO
>> GO TO 8
7.
SYSTEM DIAGNOSIS
Perform the system diagnosis for the system in which the fail-safe activates. Specify the malfunctioning part.
>> GO TO 9
8.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
>> GO TO 9
9.
MALFUNCTION PART REPAIR
Repair or replace the malfunctioning part.
>> GO TO 10
10.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT)
Perform the self-diagnosis with CONSULT. Verify that no DTCs are detected. Erase all DTCs detected prior to
the repair. Verify that DTC is not detected again.
Is any DTC detected?
YES
>> GO TO 5
INL-70
< BASIC INSPECTION >
[WITHOUT POWER DOOR LOCKS]
DIAGNOSIS AND REPAIR WORKFLOW
NO
>> GO TO 11
11.
REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.
Does it operate normally?
YES
>> Inspection End
NO
>> GO TO 3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст