Nissan Frontier. Manual — part 1034
MWI-80
< WIRING DIAGRAM >
METER
ABNIA5544GB
MWI
METER
MWI-81
< WIRING DIAGRAM >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
ABNIA5545GB
MWI-82
< WIRING DIAGRAM >
METER
ABNIA5546GB
MWI
THE FUEL GAUGE POINTER DOES NOT MOVE
MWI-83
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYMPTOM DIAGNOSIS
THE FUEL GAUGE POINTER DOES NOT MOVE
Description
INFOID:0000000009480389
Fuel gauge needle will not move from a certain position.
Diagnosis Procedure
INFOID:0000000009480390
1.
CHECK COMBINATION METER INPUT SIGNAL
1. Select “METER/M&A” on CONSULT.
2. Using “FUEL METER” of “DATA MONITOR”, compare the monitor value with the fuel gauge reading on
the combination meter. Refer to
MWI-34, "Component Function Check"
Does monitor value match fuel gauge reading?
YES
>> GO TO 2
NO
>> Replace combination meter. Refer to
MWI-90, "Removal and Installation"
2.
CHECK FUEL LEVEL SENSOR SIGNAL CIRCUIT
Check the fuel level sensor signal circuit. Refer to
.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Repair harness or connector.
3.
CHECK FUEL LEVEL SENSOR UNIT
Perform a unit check for the fuel level sensor unit. Refer to
MWI-35, "Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Replace fuel level sensor unit. Refer to
FL-10, "Removal and Installation"
4.
CHECK FLOAT INTERFERENCE
Check that the float arm does not interfere or bind with any of the components in the fuel tank.
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-90, "Removal and Installation"
NO
>> Repair or replace malfunctioning parts.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст