Nissan Frontier. Manual — part 1213
DESCRIPTION
TM-63
< SYMPTOM DIAGNOSIS >
[6MT: FS6R31A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
DESCRIPTION
Cross-Sectional View
INFOID:0000000009480441
DOUBLE-CONE SYNCHRONIZER
1.
Mainshaft
2.
Reverse synchronizer hub
3.
Reverse coupling sleeve
4.
Reverse main gear
5.
4th main gear
6.
3rd main gear
7.
1st main gear
8.
1st-2nd coupling sleeve
9.
1st-2nd synchronizer hub
10. 2nd main gear
11. 6th main gear
12. 5th-6th coupling sleeve
13. 5th-6th synchronizer hub
14. Main drive gear
15. Front cover
16. Transmission case
17. Counter gear
18. Filler plug
19. 3rd counter gear
20. 3rd-4th synchronizer hub
21. 3rd-4th coupling sleeve
22. Drain plug
23. Adapter plate
24. 4th counter gear
25. Reverse idler gear
26. Reverse idler shaft
27. Reverse counter gear
28. OD gear case
29. Rear extension
PCIB1297E
TM-64
< SYMPTOM DIAGNOSIS >
[6MT: FS6R31A]
DESCRIPTION
The 1st, 3rd and 4th gears are equipped with a double-cone synchronizer to reduce the operating force of the
shift selector.
TRIPLE-CONE SYNCHRONIZER
The 2nd gear is equipped with a triple-cone synchronizer to reduce the operating force of the shift selector.
PCIB0594E
M/T OIL
TM-65
< PERIODIC MAINTENANCE >
[6MT: FS6R31A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
PERIODIC MAINTENANCE
M/T OIL
Changing
INFOID:0000000009480442
DRAINING
1. Start the engine and let it run to warm up the transmission.
2. Stop the engine. Remove the transmission drain plug and drain the oil.
3. Set a gasket on the drain plug and install it to the transmission. Tighten the drain plug to the specified
.
CAUTION:
Do not reuse gasket.
FILLING
1. Remove the filler plug. Fill with new oil until oil level reaches the
specified limit near the filler plug hole as shown.
2. After refilling the oil, check oil level. Set a gasket to the filler
plug, then install it to the transmission. Tighten the filler plug to
the specified torque. Refer to
CAUTION:
Do not reuse gasket.
Checking
INFOID:0000000009480443
OIL LEAKAGE AND OIL LEVEL
1. Make sure that oil is not leaking from the transmission or around it.
2. Check oil level from the filler plug hole as shown.
CAUTION:
Do not start engine while checking oil level.
3. Set a gasket on the filler plug and install it to the transmission.
Tighten the filler plug to the specified torque. Refer to
CAUTION:
Do not reuse gasket.
Oil grade and viscosity
: Refer to
USA AND CANADA : Flu-
ids and Lubricants"
.
Oil capacity
: Refer to
USA AND CANADA : Flu-
ids and Lubricants"
.
PCIB0268E
PCIB0268E
TM-66
< REMOVAL AND INSTALLATION >
[6MT: FS6R31A]
REAR OIL SEAL
REMOVAL AND INSTALLATION
REAR OIL SEAL
Removal and Installation
INFOID:0000000009480444
REMOVAL
For 2WD Models
1. Remove rear propeller shaft. Refer to
(3S1310),
DLN-163, "Removal and Installation"
(3S1330),
DLN-174, "Removal and Installation"
2BJ100).
2. Remove dust seal and rear oil seal using suitable tool.
CAUTION:
Do not damage rear extension.
For 4WD Models
1. Remove front and rear propeller shafts. Refer to
DLN-134, "Removal and Installation"
143, "Removal and Installation"
DLN-174, "Removal and Installation"
2. Remove transfer assembly. Refer to
DLN-101, "Removal and Installation"
3. Remove rear oil seal using Tool.
CAUTION:
Do not damage OD gear case.
INSTALLATION
Installation is in the reverse order of removal.
For 2WD Models
LCIA0383E
Tool number
: KV381054S0 (J-34286)
PCIB1218E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст