Nissan Frontier. Manual — part 246
DLK-30
< DTC/CIRCUIT DIAGNOSIS >
DOOR SWITCH
Without CONSULT
Check voltage between BCM connector M18 or M19 terminals 12, 13, 47, 48 and ground.
Is the inspection result normal?
YES
>> Door switch circuit is OK.
NO
>> GO TO 2
2.
CHECK BCM OUTPUT VOLTAGE
1. Turn ignition switch OFF.
2. Disconnect door switches.
3. Check voltage between BCM connector M18, M19 terminals 12,
13, 47, 48 and ground.
Is the inspection result normal?
YES
>> GO TO 3
NO
BCS-49, "Removal and Installa-
.
3.
CHECK DOOR SWITCH CIRCUIT
1. Disconnect door switch and BCM.
2. Check continuity between door switch connector B8 (Front LH), B108 (Front RH), B18 (Rear LH), B116
(Rear RH) terminal 2 and BCM connector M18, M19 terminals 12, 13, 47 and 48.
3. Check continuity between door switch connector B8 (Front LH),
B108 (Front RH), B18 (Rear LH), B116 (Rear RH) terminal 2 and
ground.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Repair or replace harness.
4.
CHECK DOOR SWITCHES
1. Disconnect door switch.
2. Check continuity between door switch terminals.
Connec-
tor
Item
Terminals
Condition
Voltage (V)
(Approx.)
(+)
(–)
M19
Front door
switch LH
47
Ground
Open
↓
Closed
0
↓
Battery voltage
Rear door
switch LH
48
M18
Front door
switch RH
12
Rear door
switch RH
13
LIIA1177E
12 - Ground
: Battery voltage
13 - Ground
: Battery voltage
47 - Ground
: Battery voltage
48 - Ground
: Battery voltage
LIIA1177E
2 - 47
: Continuity should exist.
2 - 12
: Continuity should exist.
2 - 48
: Continuity should exist.
2 - 13
: Continuity should exist.
2 - Ground
: Continuity should not exist.
LIIA1178E
DOOR SWITCH
DLK-31
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> Check switch case ground condition.
NO
>> Replace door switch.
Terminal
Condition
Continuity
Door switch
2 – Ground
Open
Yes
Closed
No
WIIA0644E
DLK-32
< DTC/CIRCUIT DIAGNOSIS >
DOOR LOCK AND UNLOCK SWITCH
DOOR LOCK AND UNLOCK SWITCH
KING CAB
KING CAB : Description
INFOID:0000000009478888
Transmits door lock/unlock operation to BCM.
KING CAB : Component Function Check
INFOID:0000000009478889
1.
CHECK FUNCTION
With CONSULT
Check CDL LOCK SW, CDL UNLOCK SW in Data Monitor mode with CONSULT.
Is the inspection result normal?
YES
>> Door lock and unlock switch is OK.
NO
>> refer to
DLK-32, "KING CAB : Diagnosis Procedure"
.
KING CAB : Diagnosis Procedure
INFOID:0000000009478890
Regarding Wiring Diagram information, refer to
DLK-77, "Wiring Diagram - King Cab"
1.
CHECK DOOR LOCK/UNLOCK SWITCH INPUT SIGNAL
With CONSULT
Check door lock/unlock switch ("CDL LOCK SW", "CDL UNLOCK SW") in DATA MONITOR mode in CON-
SULT–III. Refer to
BCS-15, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)"
• When door lock/unlock switch is turned to LOCK:
• When door lock/unlock switch is turned to UNLOCK:
Without CONSULT
Check voltage between BCM connector M19 terminals 45, 46 and ground.
Is the inspection result normal?
Monitor item
Condition
CDL LOCK SW
LOCK
: ON
UNLOCK
: OFF
CDL UNLOCK SW
LOCK
: OFF
UNLOCK
: ON
CDL LOCK SW
: ON
CDL UNLOCK SW
: ON
Connec-
tor
Terminals
Condition
Voltage (V)
(Approx.)
(+)
(–)
M19
46
Ground
Door lock/unlock switch is
neutral.
Battery voltage
Door lock/unlock switch is
turned to UNLOCK.
0
45
Ground
Door lock/unlock switch is
neutral.
Battery voltage
Door lock/unlock switch is
turned to LOCK.
0
LIIA1351E
DOOR LOCK AND UNLOCK SWITCH
DLK-33
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
YES
>> Door lock/unlock switch circuit is OK.
NO
>> GO TO 2
2.
CHECK DOOR LOCK/UNLOCK SWITCH
1. Turn ignition switch OFF.
2. Disconnect door lock/unlock switch.
3. Check continuity between main power window and door lock/
unlock switch terminals 10, 11 and 14.
4. Check continuity between power window and door lock/unlock
switch RH terminals 1, 2 and 3.
Is the inspection result normal?
YES
>> GO TO 3
NO
>> Replace door lock/unlock switch.
3.
CHECK DOOR LOCK/UNLOCK SWITCH GROUND HARNESS
1. Disconnect main power window and door lock/unlock switch or power window and door lock/unlock switch
RH.
2. Check continuity between main power window and door lock/
unlock switch connector D7 terminal 14 and ground.
3. Check continuity between power window and door lock/unlock
switch RH connector D105 terminal 3 and ground
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Repair or replace harness.
4.
CHECK DOOR LOCK SWITCH CIRCUIT
1. Disconnect BCM.
Terminal
Condition
Continuity
10
14
Lock
Yes
Unlock/Neutral
No
11
Unlock
Yes
Lock/Neutral
No
Terminal
Condition
Continuity
1
3
Lock
Yes
Unlock/Neutral
No
2
Unlock
Yes
Lock/Neutral
No
WIIA0675E
14 - Ground
: Continuity should exist.
WIIA0449E
3 - Ground
: Continuity should exist.
WIIA0450E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст