Nissan Frontier. Manual — part 958
IP-12
< SYMPTOM DIAGNOSIS >
SQUEAK AND RATTLE TROUBLE DIAGNOSES
Diagnostic Worksheet
INFOID:0000000009478549
LAIA0072E
SQUEAK AND RATTLE TROUBLE DIAGNOSES
IP-13
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
LAIA0071E
IP-14
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
REMOVAL AND INSTALLATION
INSTRUMENT PANEL ASSEMBLY
Exploded View
INFOID:0000000009478550
1.
Display unit bracket (RH/LH)
2.
Steering member assembly
3.
Knee protector
4.
Instrument stay (RH/LH)
5.
Knee protector brace
6.
Speaker grille (RH/LH)
7.
Instrument lower panel LH
8.
Cluster lid A
9.
Side ventilator assembly (RH/LH)
10. Combination meter
11.
Steering lock escutcheon
12. Steering column upper cover
13. Steering column lower cover
14.
Storage tray
15. Cluster lid C
AWJIA0464ZZ
INSTRUMENT PANEL ASSEMBLY
IP-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
Removal and Installation
INFOID:0000000009478551
REMOVAL
CAUTION:
• Be careful not to scratch the instrument panel pad or other parts.
• Before servicing, turn the ignition switch OFF, disconnect both battery terminals and wait at least
three minutes.
1. Disconnect the negative and positive battery negative terminals, then wait at least three minutes.
2. Remove the front pillar upper finishers (RH/LH). Refer to
INT-19, "Removal and Installation"
3. Remove the combination meter. Refer to
MWI-90, "Removal and Installation"
4. Remove audio unit (if equipped). Refer to
AV-49, "Removal and Installation"
(BASE AUDIO),
(Display audio without amplifier) or
AV-348, "Removal and Installation"
(Dis-
play audio with amplifier).
5. Remove AV control unit (if equipped). Refer to
AV-348, "Removal and Installation"
.
6. Remove cluster lid D. Refer to
IP-21, "Removal and Installation"
7. Remove two bolts (through glove box opening) that retain front passenger air bag module to the steering
member.
8. Disconnect the harness connectors from the passenger air bag module.
• For removal/installation of the direct-connect SRS connectors, refer to
.
9. Remove the instrument stay (RH/LH) bolts.
10. Disconnect all remaining harnesses and connectors.
11. Remove the instrument panel and pad assembly.
INSTALLATION
Installation is in the reverse order of removal.
16. Center ventilator assembly (RH/LH) 17.
Cluster lid D
18. Audio unit
19. Lower glove box latch assembly
20.
Lower glove box assembly
21. Fuse block cover
22. Lower glove box damper assembly
23.
Instrument lower panel (RH)
24. Upper glove box door
25. Upper glove box lid
26.
Instrument panel side cover RH
27. Instrument panel and pad assembly
28. Passenger air bag module
29.
Sensor cover
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст