Nissan Frontier. Manual — part 293
DLN-74
< SYMPTOM DIAGNOSIS >
[TRANSFER: TX15B]
4WD SHIFT INDICATOR LAMP AND 4LO INDICATOR LAMP DO NOT TURN ON
4WD SHIFT INDICATOR LAMP AND 4LO INDICATOR LAMP DO NOT
TURN ON
Description
INFOID:0000000009479691
4WD shift indicator lamp and 4LO indicator lamp do not turn ON for approx. 1 second when turning ignition
switch to ON.
Diagnosis Procedure
INFOID:0000000009479692
1.
CHECK SELF-DIAGNOSIS
Perform transfer control unit self-diagnosis. Refer to
DLN-17, "CONSULT Function (ALL MODE AWD/4WD)"
.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Check items displayed by self-diagnosis.
2.
CHECK COMBINATION METER
Check if the indication and operation of combination meter are normal. Refer to
.
Is the inspection result normal?
YES
>> Replace transfer control unit. Refer to
DLN-92, "Removal and Installation"
.
NO
>> Replace combination meter. Refer to
4WD SHIFT INDICATOR LAMP OR 4LO INDICATOR LAMP DO NOT CHANGE
DLN-75
< SYMPTOM DIAGNOSIS >
[TRANSFER: TX15B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
4WD SHIFT INDICATOR LAMP OR 4LO INDICATOR LAMP DO NOT
CHANGE
Description
INFOID:0000000009479693
4WD shift indicator lamp or 4LO indicator lamp do not change when switching the 4WD shift switch.
Diagnosis Procedure
INFOID:0000000009479694
1.
CONFIRM THE SYMPTOM
Confirm 4WD shift indicator lamp and 4LO indicator lamp when ignition switch is turned to ON.
Do 4WD shift indicator lamp and 4LO indicator lamp turn on?
YES-1 (A/T models)>>GO TO 2.
YES-2 (M/T models)>>GO TO 3.
NO
>> Go to
2.
CHECK SYSTEM FOR STOP LAMP SWITCH
Perform trouble diagnosis for stop lamp switch system. Refer to
(Type 1) or
BRC-171, "Diagnosis Procedure"
(Type 2).
Are the inspection results normal?
YES
>> GO TO 3.
NO
>> Repair or replace damaged parts.
3.
CHECK SYSTEM FOR 4WD SHIFT SWITCH
Perform trouble diagnosis for 4WD shift switch system. Refer to
Are the inspection results normal?
YES
>> GO TO 4.
NO
>> Repair or replace damaged parts.
4.
CHECK SYSTEM FOR WAIT DETECTION SWITCH
Perform trouble diagnosis for wait detection switch system. Refer to
Are the inspection results normal?
YES
>> GO TO 5.
NO
>> Repair or replace damaged parts.
5.
CHECK SYSTEM FOR 4LO SWITCH
Perform trouble diagnosis for 4LO switch system. Refer to
Are the inspection results normal?
YES-1 (A/T models)>>GO TO 6.
YES-2 (M/T models)>>GO TO 7.
NO
>> Repair or replace damaged parts.
6.
CHECK SYSTEM FOR ATP SWITCH
Perform trouble diagnosis for ATP switch system. Refer to
.
Are the inspection results normal?
YES
>> GO TO 7.
NO
>> Repair or replace damaged parts.
7.
SYMPTOM CHECK
Check again.
Does the symptom still occur?
YES
>> GO TO 8.
NO
>> Inspection End.
8.
CHECK TRANSFER CONTROL UNIT
Check transfer control unit input/output signal. Refer to
DLN-76
< SYMPTOM DIAGNOSIS >
[TRANSFER: TX15B]
4WD SHIFT INDICATOR LAMP OR 4LO INDICATOR LAMP DO NOT CHANGE
Are the inspection results normal?
YES
>> GO TO 9.
NO
>> Check transfer control unit pin terminals for damage or loose connection with harness connector.
If any items are damaged, repair or replace damaged parts.
9.
CHECK TRANSFER INNER PARTS
1. Disassemble transfer assembly. Refer to
DLN-104, "Disassembly and Assembly"
2. Check transfer inner parts.
Are the inspection results normal?
YES
>> Inspection End.
NO
>> Repair or replace damaged parts.
ATP WARNING LAMP DOES NOT TURN ON
DLN-77
< SYMPTOM DIAGNOSIS >
[TRANSFER: TX15B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
ATP WARNING LAMP DOES NOT TURN ON
Description
INFOID:0000000009479695
ATP warning lamp does not turn ON when the transfer case is switched in or out of 4LO with the A/T selector
lever in N position.
Diagnosis Procedure
INFOID:0000000009479696
1.
CHECK SELF-DIAGNOSIS
Perform transfer control unit self-diagnosis. Refer to
DLN-17, "CONSULT Function (ALL MODE AWD/4WD)"
.
Is the inspection result normal?
YES
>> GO TO 2
NO
>> Check items displayed by self-diagnosis.
2.
CHECK COMBINATION METER
Check if the indication and operation of combination meter are normal. Refer to
.
Is the inspection result normal?
YES
>> Replace transfer control unit. Refer to
DLN-92, "Removal and Installation"
.
NO
>> Replace combination meter. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст