Nissan Frontier. Manual — part 73
AV-284
< BASIC INSPECTION >
[NAVIGATION]
INSPECTION AND ADJUSTMENT
>> Work End.
CONFIGURATION (AV CONTROL UNIT)
CONFIGURATION (AV CONTROL UNIT) : Description
INFOID:0000000009482201
Vehicle specification needs to be written with CONSULT because it is not written after replacing AV control
unit.
Configuration has three functions as follows:
CAUTION:
• When replacing AV control unit, you must perform “Select Saved Data List” or "After Replace ECU"
with CONSULT.
• Complete the procedure of “Select Saved Data List” or "After Replace ECU" in order.
• If you set incorrect “Select Saved Data List” or "After Replace ECU", incidents might occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
• Never perform “Select Saved Data List” or "After Replace ECU" except for new AV control unit.
CONFIGURATION (AV CONTROL UNIT) : Work Procedure
INFOID:0000000009482202
1.
WRITING MODE SELECTION
CONSULT
Select “Reprogramming, Configuration” of AV control unit.
When writing saved data>>GO TO 2.
When writing manually>>GO TO 3.
2.
PERFORM “SAVED DATA LIST”
CONSULT
Automatically “Operation Log Selection” window will display if “Before Replace ECU” was performed. Select
applicable file from the “Save Data List” and press “Confirm”.
>> Work End.
3.
PERFORM “AFTER REPLACE ECU” OR “MANUAL CONFIGURATION”
CONSULT
1. Select “After Replace ECU” or “Manual Configuration”.
2. Identify the correct model and configuration list. Refer to
AV-285, "CONFIGURATION (AV CONTROL
3. Confirm and/or change setting value for each item.
CAUTION:
Thoroughly read and understand the vehicle specification. ECU control may not operate normally
if the setting is not correct.
4. Select “Next”.
CAUTION:
Make sure to select “Next”, confirm each setting value and press “OK” even if the indicated con-
figuration of brand new AV control unit is same as the desirable configuration. If not, configuration
which is set automatically by selecting vehicle model can not be memorized.
5. When "Completed", select "End".
>> GO TO 4.
Function
Description
"Before Replace ECU"
• Reads the vehicle configuration of current AV control unit.
• Saves the read vehicle configuration.
"After Replace ECU"
Writes the vehicle configuration with manual selection.
"Select Saved Data List"
Writes the vehicle configuration with saved data.
AV
INSPECTION AND ADJUSTMENT
AV-285
< BASIC INSPECTION >
[NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
4.
OPERATION CHECK
Confirm that each function controlled by AV control unit operates normally.
>> Work End.
CONFIGURATION (AV CONTROL UNIT) : Configuration List
INFOID:0000000009482203
CAUTION:
Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal
control of ECU.
⇔: Items which confirm vehicle specifications
REGISTRATION (AV CONTROL UNIT)
REGISTRATION (AV CONTROL UNIT) : Description
INFOID:0000000011217827
AFTER REPLACEMENT
If the AV control unit is replaced with a new AV control unit, the new AV control unit must be registered using
the registration code.
CAUTION:
If the new AV control unit registration code is not registered, the “APPS” mode will not function.
REGISTRATION (AV CONTROL UNIT) : Work Procedure
INFOID:0000000011217828
1.
RECORD REGISTRATION CODE FOR REPLACEMENT AV CONTROL UNIT
1. Refer to the replacement AV control unit’s label located on the top of the AV control unit.
2. Create a registration code to supply to NISSAN Owner Services by combining the last 9 digits of the NIS-
SAN PART NO. (1) and the first 7 digits of the bar code number (2).
MANUAL SETTING ITEM
Items
Setting value
SOUND SYSTEM
BASE
⇔ BOSE
CAMERA SYSTEM
NONE/AVM
⇔ REAR CAMERA
ALNIA1654ZZ
AV-286
< BASIC INSPECTION >
[NAVIGATION]
INSPECTION AND ADJUSTMENT
3. Record the registration code.
>> GO TO 2.
2.
REGISTER REPLACEMENT AV CONTROL UNIT
Register the replacement AV control unit by contacting NISSAN Owner Services. Refer to TSB.
>> GO TO 3.
3.
OPERATION CHECK
Verify that the AV control unit “APPS” function operates normally.
>> Work End.
AWNIA3614ZZ
AV
U1000 CAN COMM CIRCUIT
AV-287
< DTC/CIRCUIT DIAGNOSIS >
[NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DTC/CIRCUIT DIAGNOSIS
U1000 CAN COMM CIRCUIT
DTC Logic
INFOID:0000000009482204
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000009482205
1.
PERFORM SELF DIAGNOSTIC RESULT
1. Turn ignition switch ON and wait for 2 seconds or more.
2. Perform Self Diagnostic Result for MULTI AV.
Is CAN COMM CIRCUIT displayed?
YES
>> Refer to
LAN-14, "Trouble Diagnosis Flow Chart"
NO
>> Refer to
GI-42, "Intermittent Incident"
.
CONSULT Display
DTC Detection Condition
Possible Cause
CAN COMM CIRCUIT
[U1000]
AV control unit is not transmitting or receiving
CAN communication signal for 2 seconds or
more.
CAN communication system.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст