Nissan Pathfinder (2012 year). Manual — part 30
AV-58
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
U1200 AV CONTROL UNIT
U1200 AV CONTROL UNIT
Description
INFOID:0000000007347619
Replace the AV control unit if this DTC is displayed. Refer to
AV-114, "Removal and Installation"
.
DTC Logic
INFOID:0000000007347620
Part name
Description
AV CONTROL UNIT
• It is the master unit of the MULTI AV system and it is connected to each control
unit by means of communication. It operates each system according to com-
munication signals from the AV control unit.
• AV control unit includes audio function and vehicle information function.
• It is connected to ECM and combination meter via CAN communication to ob-
tain necessary information for the vehicle information function.
• It inputs the automatic brightness ON/OFF signals that are required for the dis-
play dimming control.
• It inputs the signals for driving status recognition (vehicle speed, reverse and
parking brake).
DTC
Display contents of CONSULT
DTC Detection Condition
Action to take
U1200
Control Unit
FLASH- ROM
[U1200]
An internal malfunction is detected in AV control unit
(FLASH-ROM).
Replace AV control unit. Re-
fer to
.
August 2012
2012 Pathfinder
AV
U1216 AV CONTROL UNIT
AV-59
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
U1216 AV CONTROL UNIT
Description
INFOID:0000000007347621
Replace the AV control unit if this DTC is displayed. Refer to
AV-114, "Removal and Installation"
DTC Logic
INFOID:0000000007347622
Part name
Description
AV CONTROL UNIT
• It is the master unit of the MULTI AV system and it is connected to each control
unit by means of communication. It operates each system according to com-
munication signals from the AV control unit.
• AV control unit includes audio function and vehicle information function.
• It is connected to ECM and combination meter via CAN communication to ob-
tain necessary information for the vehicle information function.
• It inputs the automatic brightness ON/OFF signals that are required for the dis-
play dimming control.
• It inputs the signals for driving status recognition (vehicle speed, reverse and
parking brake).
DTC
Display contents of CONSULT
DTC Detection Condition
Action to take
U1216
CAN CONT
[U1216]
Internal malfunction of AV control unit (CAN controller) is
detected.
Replace AV control unit.
Refer to
August 2012
2012 Pathfinder
AV-60
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
U1240 SWITCH CONN
U1240 SWITCH CONN
Description
INFOID:0000000007347623
U1240 is indicated when malfunction occurs in communication signal of multi AV system. Indicated simulta-
neously, without fail, with the malfunction of control units connected to AV control unit with communication line.
Determine the possible malfunction cause from the table below.
Self-diagnosis results display item
DTC
Display contents of
CONSULT
DTC Detection Condition
Possible causes
U1240
• SWITCH CONN
[U1240]
• A/C and AV switch assembly power supply and ground
circuit malfunction is detected
• A malfunction is detected in communication circuit be-
tween AV control unit and A/C and AV switch assembly
• A malfunction is detected in communication signal be-
tween AV control unit and A/C and AV switch assembly
• A/C and AV switch assembly power
supply and ground circuits
• Communication circuit between AV
control unit and A/C and AV switch
assembly
August 2012
2012 Pathfinder
AV
U1243 DISPLAY UNIT
AV-61
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
U1243 DISPLAY UNIT
Description
INFOID:0000000007347624
DTC Logic
INFOID:0000000007347625
Diagnosis Procedure
INFOID:0000000007347626
Regarding Wiring Diagram information, refer to
1.
CHECK DISPLAY UNIT POWER SUPPLY AND GROUND CIRCUIT
Check display unit power supply and ground circuit. Refer to
AV-66, "DISPLAY UNIT : Diagnosis Procedure"
Is inspection result OK?
YES
>> GO TO 2
NO
>> Repair malfunctioning parts.
2.
CHECK CONTINUITY OF COMMUNICATION CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect display unit connector and AV control unit connector.
3. Check continuity between display unit harness connector M93
(A) terminals 11, 22 and AV control unit harness connector
M133 (B) terminals 56, 44.
4. Check continuity between display unit harness connector M93
(A) terminals 11, 22 and ground.
Are continuity results as specified?
YES
>> GO TO 3
Part name
Description
DISPLAY UNIT
• Display image is controlled by the serial communication from AV control unit.
• Inputs the RGB image signal (RGB, RGB area and RGB synchronizing) from
AV control unit and the auxiliary image signal from the auxiliary input jacks.
• Outputs the synchronizing signals (HP and VP) to the AV control unit.
DTC
Display contents of
CONSULT
DTC Detection Condition
Possible causes
U1243
FRONT DISP CONN
[U1243]
• Display unit power supply and ground circuit malfunc-
tion is detected
• Malfunction is detected on communication circuit be-
tween display unit and AV control unit
• Malfunction is detected on communication signal be-
tween display unit and AV control unit
• Display unit power supply and
ground circuit
• Communication circuit between
display unit and AV control unit
A
B
Continuity
Connector
Terminal
Connector
Terminal
M93
11
M133
56
Yes
22
44
A
—
Continuity
Connector
Terminal
M93
11
Ground
No
22
ALNIA0310GB
August 2012
2012 Pathfinder
AV-62
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
U1243 DISPLAY UNIT
NO
>> Repair harness or connector.
3.
CHECK COMMUNICATION SIGNAL
1. Connect display unit connector and AV control unit connector.
2. Turn ignition switch ON.
3. Check signal between display unit harness connector M93 ter-
minal 11 and ground with an oscilloscope or CONSULT.
Are voltage readings as specified?
YES
>> GO TO 4
NO
>> Replace AV control unit. Refer to
AV-114, "Removal and Installation"
4.
CHECK COMMUNICATION SIGNAL
Check signal between display unit harness connector M93 terminal
22 and ground with an oscilloscope or CONSULT.
Are voltage readings as specified?
YES
>> Inspection End.
NO
>> Replace display unit. Refer to
AV-116, "Removal and Installation"
.
(+)
(-)
Reference signal
Connector
Terminal
M93
11
Ground
ALNIA0311GB
PKIB5039J
(+)
(-)
Reference signal
Connector
Terminal
M93
22
Ground
ALNIA0312GB
PKIB5039J
August 2012
2012 Pathfinder
AV
U1300 AV COMM CIRCUIT
AV-63
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
U1300 AV COMM CIRCUIT
Description
INFOID:0000000007347627
U1300 is indicated when malfunction occurs in communication signal of multi AV system. Indicated simulta-
neously, without fail, with the malfunction of control units connected to AV control unit with communication line.
Determine the possible malfunction cause from the table below.
Self-diagnosis results display item
DTC
Display contents of
CONSULT
DTC Detection Condition
Possible causes
U1300
U1240
• AV COMM CIRCUIT
[U1300]
• SWITCH CONN
[U1240]
• A/C and AV switch assembly power supply and ground
circuit malfunction is detected
• A malfunction is detected in communication circuit be-
tween AV control unit and A/C and AV switch assembly
• A malfunction is detected in communication signal be-
tween AV control unit and A/C and AV switch assembly
• A/C and AV switch assembly power
supply and ground circuits
• Communication circuit between AV
control unit and A/C and AV switch
assembly
August 2012
2012 Pathfinder
AV-64
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
U1310 AV CONTROL UNIT
U1310 AV CONTROL UNIT
Description
INFOID:0000000007347628
Replace the AV control unit if this DTC is displayed. Refer to
AV-114, "Removal and Installation"
.
DTC Logic
INFOID:0000000007347629
Part name
Description
AV CONTROL UNIT
• It is the master unit of the MULTI AV system and it is connected to each control
unit by means of communication. It operates each system according to com-
munication signals from the AV control unit.
• AV control unit includes audio function and vehicle information function.
• It is connected to ECM and combination meter via CAN communication to ob-
tain necessary information for the vehicle information function.
• It inputs the automatic brightness ON/OFF signals that are required for the dis-
play dimming control.
• It inputs the signals for driving status recognition (vehicle speed, reverse and
parking brake).
DTC
Display contents of
CONSULT
DTC Detection Condition
Action to take
U1310
CONTROL UNIT (AV)
[U1310]
An initial diagnosis error is detected in AV communication
circuit.
Replace AV control unit. Refer to
114, "Removal and Installation"
.
August 2012
2012 Pathfinder
AV
POWER SUPPLY AND GROUND CIRCUIT
AV-65
< DTC/CIRCUIT DIAGNOSIS >
[MID AUDIO]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
POWER SUPPLY AND GROUND CIRCUIT
AV CONTROL UNIT
AV CONTROL UNIT : Diagnosis Procedure
INFOID:0000000007347630
Regarding Wiring Diagram information, refer to
1.
CHECK FUSES
Check that the following fuses of the AV control unit are not are not blown.
Are the fuses OK?
YES
>> GO TO 2
NO
>> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse.
2.
POWER SUPPLY CIRCUIT CHECK
1. Disconnect AV control unit connectors M131 and M135.
2. Check voltage between the AV control unit connectors M131
and M135 and ground.
Are the voltage results as specified?
YES
>> GO TO 3
NO
>> • Check connector housings for disconnected or loose
terminals.
• Repair harness or connector.
3.
GROUND CIRCUIT CHECK
1. Turn ignition switch OFF.
2. Check continuity between AV control unit harness connectors M131, M133, M134, M135 and ground.
Unit
Terminals
Signal name
Fuse No.
AV control unit
19
Battery power
29
7
Ignition switch ACC or ON
4
104
Ignition switch ON or START
12
(+)
(-)
OFF
ACC
ON
Connector
Terminal
M131
7
Ground
0V
Battery
voltage
Battery
voltage
19
Ground
Battery
voltage
Battery
voltage
Battery
voltage
M135
104
Ground
0V
0V
Battery
voltage
ALNIA0875GB
August 2012
2012 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст