Nissan Pathfinder (2012 year). Manual — part 80
BCS-20
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
WORK SUPPORT
*: Initial setting
HEADLAMP
KEYLESS PANIC [On/Off]
Indicates condition of panic signal from keyfob.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
KEY CYL LK SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
Monitor Item [Unit]
Description
Test Item
Description
DOOR LOCK
This test is able to check door lock operation [OTR ULK/DR UNLK/ALL ULK/ALL LCK].
PW REMOTO DOWN SET
This test is able to check keyfob power window down operation [Off/On].
FLASHER
This test is able to check hazard reminder operation [Off/LH/RH].
HORN
This test is able to check horn operation [On].
Support Item
Setting
Description
HORN CHIRP SET
Off
Horn chirp function can be changed in this mode.
On*
HAZARD LAMP SET
MODE4*
Lock and Unlock
Hazard warning lamp function can be changed in this mode.
MODE3
Lock Only
MODE2
Unlock Only
MODE1
OFF
MULTI ANSWER BACK SET
MODE2
Lock
Hazard warning lamps flash twice and horn does not sound.
Unlock
Hazard warning lamps do not flash and horn does not sound.
MODE1*
Lock
Hazard warning lamps flash twice and horn sounds once.
Unlock
Hazard warning lamps flash once and horn does not sound.
AUTO LOCK SET
MODE3
1 min
Auto locking function can be changed in this mode.
MODE2
OFF
MODE1*
5 min
PANIC ALRM SET
MODE3
1.5 sec
Panic alarm operation can be changed in this mode.
MODE2
OFF
MODE1*
0.5 sec
PW DOWN SET
MODE3
5 sec
Keyfob power window down can be changed in this mode.
MODE2
OFF
MODE1*
3 sec
REMO CONT ID REGIST
—
Keyfob ID code can be registered.
REMO CONT ID ERASUR
—
Keyfob ID code can be erased.
REMO CONT ID CONFIR
—
Keyfob ID code registration is displayed.
August 2012
2012 Pathfinder
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
HEADLAMP : CONSULT Function (BCM - HEAD LAMP)
INFOID:0000000007354918
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
ACC ON SW [On/Off]
Indicates condition of ignition switch ACC position.
HI BEAM SW [On/Off]
Indicates condition of combination switch.
HEAD LAMP SW 1 [On/Off]
HEAD LAMP SW 2 [On/Off]
LIGHT SW 1ST [On/Off]
AUTO LIGHT SW [On/Off]
PASSING SW [On/Off]
FR FOG SW [On/Off]
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
BACK DOOR SW [On/Off]
Indicates condition of back door switch.
TURN SIGNAL R [On/Off]
Indicates condition of combination switch.
TURN SIGNAL L [On/Off]
OPTICAL SENSOR [V]
Indicates voltage signal from optical sensor.
Test Item
Description
TAIL LAMP
This test is able to check tail lamp operation [Off/On].
HEAD LAMP
This test is able to check head lamp operation [Off/Lo/Hi].
FR FOG LAMP
This test is able to check front fog lamp operation [Off/On].
Support Item
Setting
Description
BATTERY SAVER SET
Off
Exterior lamp battery saver function OFF.
On*
Exterior lamp battery saver function ON.
CUSTOM A/LIGHT SETTING
MODE4
Less sensitive setting than normal setting (Turns ON later than
normal operation).
MODE3
More sensitive setting than MODE 2 (Turns ON earlier than
MODE 2).
MODE2
More sensitive setting than normal setting (Turns ON earlier
than normal operation).
MODE1*
Normal.
August 2012
2012 Pathfinder
BCS-22
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
*: Initial setting
WIPER
WIPER : CONSULT Function (BCM - WIPER)
INFOID:0000000007354919
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
* : Initial setting
FLASHER
FLASHER : CONSULT Function (BCM - FLASHER)
INFOID:0000000007354920
DATA MONITOR
ILL DELAY SET
MODE8
180 sec
Sets delay timer function operation time
(All doors closed).
MODE7
150 sec
MODE6
120 sec
MODE5
90 sec
MODE4
60 sec
MODE3
30 sec
MODE2
OFF
MODE1*
45 sec
Support Item
Setting
Description
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
IGN SW CAN [On/Off]
Indicates ignition switch ON signal received from IPDM E/R on CAN communication line.
FR WIPER HI [On/Off]
Indicates condition of front wiper operation of combination switch.
FR WIPER LOW [On/Off]
FR WIPER INT [On/Off]
FR WASHER SW [On/Off]
INT VOLUME [1 - 7]
FR WIPER STOP [On/Off]
Indicates front wiper motor auto stop signal received from IPDM E/R on CAN communica-
tion line.
VEHICLE SPEED [km/h/mph]
Indicates vehicle speed signal received from combination meter on CAN communication
line.
RR WIPER ON [On/Off]
Indicates condition of rear wiper operation of combination switch.
RR WIPER INT [On/Off]
RR WASHER SW [On/Off]
RR WIPER STOP [On/Off]
Indicates rear wiper motor auto stop input from rear wiper motor.
Test Item
Description
FR WIPER
This test is able to check front wiper operation [Off/INT/Lo/Hi].
RR WIPER
This test is able to check rear wiper operation [Off/On].
Support Item
Setting
Description
WIPER SPEED SETTING
Off*
Front wiper intermittent time linked with wiper dial position.
On
Front wiper intermittent time linked with vehicle speed and wiper dial position.
August 2012
2012 Pathfinder
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-23
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
AIR CONDITIONER
AIR CONDITIONER : CONSULT Function (BCM - AIR CONDITIONER)
INFOID:0000000007354921
DATA MONITOR
INTELLIGENT KEY
INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)
INFOID:0000000007354922
DATA MONITOR
COMB SW
COMB SW : CONSULT Function (BCM - COMB SW)
INFOID:0000000007354923
DATA MONITOR
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
HAZARD SW [On/Off]
Indicates condition of hazard switch.
TURN SIGNAL R [On/Off]
Indicates condition of turn signal function of combination switch.
TURN SIGNAL L [On/Off]
BRAKE SW [On/Off]
Indicates condition of brake switch.
Test Item
Description
FLASHER
This test is able to check turn signal lamp operation [Off/LH/RH].
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
FAN ON SIG [On/Off]
Indicates condition of fan switch.
AIR COND SW [On/Off]
Indicates condition of A/C switch.
Monitor Item [Unit]
Description
I-KEY LOCK [On/Off]
Indicates condition of lock signal from Intelligent Key.
I-KEY UNLOCK [On/Off]
Indicates condition of unlock signal from Intelligent Key.
I-KEY PW DWN [On/Off]
Indicates condition of power window down signal from Intelligent Key.
I-KEY PANIC [On/Off]
Indicates condition of panic signal from Intelligent Key.
PUSH SW [On/Off]
Indicates condition of ignition knob switch.
Monitor Item [Unit]
Description
TURN SIGNAL R [On/Off]
Indicates condition of turn signal operation of combination switch.
TURN SIGNAL L [On/Off]
HI BEAM SW [On/Off]
Indicates condition of hi beam operation of combination switch.
HEAD LAMP SW 1 [On/Off]
Indicates condition of headlamp operation of combination switch.
HEAD LAMP SW 2 [On/Off]
LIGHT SW 1ST [On/Off]
Indicates condition of lighting operation of combination switch.
PASSING SW [On/Off]
Indicates condition of passing switch operation of combination switch.
AUTO LIGHT SW [On/Off]
Indicates condition of auto light operation of combination switch.
FR FOG SW [On/Off]
Indicates condition of front fog light operation of combination switch.
August 2012
2012 Pathfinder
BCS-24
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
BCM
BCM : CONSULT Function (BCM - BCM)
INFOID:0000000007354924
ECU IDENTIFICATION
The BCM part number is displayed.
SELF DIAGNOSTIC RESULT
WORK SUPPORT
CONFIGURATION
BCS-4, "CONFIGURATION (BCM) : Description"
.
CAN DIAG SUPPORT MNTR
LAN-10, "CAN Diagnostic Support Monitor"
.
IMMU
IMMU : CONSULT Function (BCM - IMMU)
INFOID:0000000007354925
SELF DIAGNOSTIC RESULT
DATA MONITOR
ACTIVE TEST
BATTERY SAVER
BATTERY SAVER : CONSULT Function (BCM - BATTERY SAVER)
INFOID:0000000007354926
DATA MONITOR
FR WIPER HI [On/Off]
Indicates condition of front wiper operation of combination switch.
FR WIPER LOW [On/Off]
FR WIPER INT [On/Off]
FR WASHER SW [On/Off]
Indicates condition of front washer operation of combination switch.
INT VOLUME [1 - 7]
Indicates condition of intermittent wiper operation of combination switch.
RR WIPER ON [On/Off]
Indicates condition of rear wiper operation of combination switch.
RR WIPER INT [On/Off]
RR WASHER SW [On/Off]
Indicates condition of rear washer operation of combination switch.
Monitor Item [Unit]
Description
Support Item
Setting
Description
RESET SETTING VALUE
Reset
Returns BCM to initial value in factory shipment.
Cancel
Cancels the reset function.
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
Test Item
Description
THEFT IND
This test is able to check security indicator operation [Off/On].
August 2012
2012 Pathfinder
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-25
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
* : with Intelligent Key
** : without Intelligent Key
ACTIVE TEST
WORK SUPPORT
*: Initial setting
TRUNK
TRUNK : CONSULT Function (BCM - TRUNK)
INFOID:0000000007354927
DATA MONITOR
ACTIVE TEST
THEFT ALM
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
KEY ON SW [On/Off]
Indicates condition of key switch.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
BACK DOOR SW [On/Off]
Indicates condition of back door switch.
KEY CYL LK SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
I-KEY LOCK* [On/Off]
Indicates condition of lock signal from Intelligent Key.
I-KEY UNLOCK* [On/Off]
Indicates condition of unlock signal from Intelligent Key.
KEYLESS LOCK** [On/Off]
Indicates condition of lock signal from keyfob.
KEYLESS UNLOCK** [On/Off]
Indicates condition of unlock signal from keyfob.
Test item
Description
BATTERY SAVER
This test is able to check battery saver operation [Off/On].
Support Item
Setting
Description
ROOM LAMP TIMER SET
MODE2
60 min
Sets the interior room lamp battery saver timer
operating time.
MODE1*
15 min (early production)
10 min (late production)
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
TRNK OPNR SW [On/Off]
Indicates condition of back door opener switch.
VEHICLE SPEED [km/h/mph]
Indicates vehicle speed signal received from combination meter on CAN communication
line.
Test item
Description
TRUNK/BACK DOOR
This test is able to check back door latch operation [Open].
August 2012
2012 Pathfinder
BCS-26
< SYSTEM DESCRIPTION >
DIAGNOSIS SYSTEM (BCM)
THEFT ALM : CONSULT Function (BCM - THEFT ALM)
INFOID:0000000007354928
DATA MONITOR
* : with Intelligent Key
** : without Intelligent Key
ACTIVE TEST
WORK SUPPORT
*: Initial setting
RETAINED PWR
RETAINED PWR : CONSULT Function (BCM - RETAINED PWR)
INFOID:0000000007354929
DATA MONITOR
ACTIVE TEST
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
ACC ON SW [On/Off]
Indicates condition of ignition switch ACC position.
I-KEY LOCK* [On/Off]
Indicates condition of lock signal from Intelligent Key.
I-KEY UNLOCK* [On/Off]
Indicates condition of unlock signal from Intelligent Key.
KEYLESS LOCK** [On/Off]
Indicates condition of lock signal from keyfob.
KEYLESS UNLOCK** [On/Off]
Indicates condition of unlock signal from keyfob.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
BACK DOOR SW [On/Off]
Indicates condition of back door switch.
KEY CYL LK-SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
Test Item
Description
THEFT IND
This test is able to check security indicator lamp operation [Off/On].
VEHICLE SECURITY HORN
This test is able to check vehicle security horn operation [On].
HEADLAMP(HI)
This test is able to check vehicle security lamp operation [On].
Support Item
Setting
Description
SECURITY ALARM SET
Off
Security alarm OFF.
On*
Security alarm ON.
THEFT ALM TRG
Off/On
The switch which triggered vehicle security alarm is recorded.
Monitor Item [Unit]
Description
IGN ON SW [On/Off]
Indicates condition of ignition switch ON position.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
August 2012
2012 Pathfinder
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-27
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
WORK SUPPORT
*: Initial setting
SIGNAL BUFFER
SIGNAL BUFFER : CONSULT Function (BCM - SIGNAL BUFFER)
INFOID:0000000007354930
DATA MONITOR
ACTIVE TEST
AIR PRESSURE MONITOR
AIR PRESSURE MONITOR : CONSULT Function (BCM - AIR PRESSURE MONI-
TOR)
INFOID:0000000007354931
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
SELF DIAGNOSTIC RESULT
NOTE:
Before performing Self Diagnostic Result, be sure to register the ID, or else the actual malfunction may be dif-
ferent from that displayed on CONSULT.
DATA MONITOR
Test Item
Description
RETAINED PWR
This test is able to check retained power operation [Off/On].
Support Item
Setting
Description
RETAINED PWR SET
MODE3
2 min
Sets the retained accessory power operating time.
MODE2
OFF
MODE1*
45 sec
Monitor Item [Unit]
Description
OIL PRESS SW [On/Off]
Indicates condition of oil pressure switch signal received from IPDM E/R on CAN communica-
tion line.
Test Item
Description
OIL PRESSURE SW
This test is able to check the oil pressure gauge operation [Off/On].
Monitor Item
Condition
Specification
VEHICLE SPEED
Drive vehicle
Vehicle speed (km/h or mph)
AIR PRESS FL
• Drive vehicle for a few minutes.
or
• Ignition switch ON and activation tool is trans-
mitting activation signals.
Tire pressure (kPa, kg/cm
2
or psi).
AIR PRESS FR
AIR PRESS RR
AIR PRESS RL
August 2012
2012 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст