Nissan Sentra. Manual — part 190
BRM-34
< REMOVAL AND INSTALLATION >
REPLACEMENT OPERATIONS
Roof
INFOID:0000000009758081
REMOVAL
1. Remove the headlining. Refer to
INT-40, "Removal and Installation"
.
Replacement parts
z
Roof panel
Front
ALKIA2779ZZ
REPLACEMENT OPERATIONS
BRM-35
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
2. Remove the roof side moldings (RH/LH). Refer to
EXT-32, "Removal and Installation"
.
3. Remove the windshield glass. Refer to
GW-12, "Removal and Installation"
.
4. Remove the rear window glass. Refer to
GW-26, "Removal and Installation"
5. Drill out spot welds using a 8.0 mm (0.31 in) spot weld removing bit (A) on the windshield and rear window
glass flanges.
NOTE:
Only drill through the first layer of metal (the roof outer panel)
6. Use an angle head grinder and a 3.18 mm (0.125 in) cutting wheel (A) to grind through the first layer only.
NOTE:
Only grind through the first layer of metal (the roof outer panel)
ALKIA2824ZZ
BRM-36
< REMOVAL AND INSTALLATION >
REPLACEMENT OPERATIONS
7. Remove roof panel (1).
PREPARATION
ALKIA2825ZZ
ALKIA2543ZZ
REPLACEMENT OPERATIONS
BRM-37
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
BRM
N
O
P
1. Grind all mating surfaces around the roof flanges.
2. Test panel for proper alignment and fit.
3. Remove panel.
4. Compare to the removed panel, then drill 8.0 mm (0.31 in) holes in the same location on the new roof
panel.
5. Use 3M weld through primer to prime body side upper and the front and rear window flanges
INSTALLATION
1.
Weld through primer
Front
ALKIA2542ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст