Nissan Sentra. Manual — part 565
HAC-108
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONER]
SUNLOAD SENSOR
SUNLOAD SENSOR
Removal and Installation
INFOID:0000000009757706
REMOVAL
1. Release the defroster grille (LH). Refer to
VTL-9, "SIDE DEFROSTER GRILLE : Removal and Installa-
2. Disconnect the harness connector from the sunload sensor.
3. Release the sunload sensor pawls using a suitable tool, then remove the sunload sensor.
INSTALLATION
Installation is in the reverse order of removal.
INTAKE SENSOR
HAC-109
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
INTAKE SENSOR
Removal and Installation
INFOID:0000000009757707
The intake sensor is serviced as an assembly with the heating and cooling unit assembly. Refer to
"HEATING AND COOLING UNIT ASSEMBLY : Removal and Installation"
HAC-110
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONER]
REFRIGERANT PRESSURE SENSOR
REFRIGERANT PRESSURE SENSOR
Removal and Installation
INFOID:0000000009757708
REMOVAL
1. Discharge the refrigerant. Refer to
2. Remove the core support upper. Refer to
3. Disconnect the harness connector from the refrigerant pressure sensor.
4. Remove the refrigerant pressure sensor (1).
CAUTION:
Cap or wrap the opening of the refrigerant pressure sensor
with suitable material such as vinyl tape to avoid the entry
of air.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-ring.
• Apply A/C oil to the O-ring of the refrigerant pressure sensor for installation.
• After charging refrigerant, check for leaks. Refer to
ALIIA0669ZZ
DOOR MOTOR
HAC-111
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
DOOR MOTOR
Exploded View
INFOID:0000000009757709
1.
Heating and cooling unit assembly
2.
Intake door motor
3.
Mode door motor
4.
Air mix door motor LH
5.
Air mix door motor RH
ALIIA0646ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст