Nissan Sentra. Manual — part 939
WW-4
< PRECAUTION >
PRECAUTIONS
• Dip a soft cloth into lukewarm water with mild detergent (concentration: within 2 to 3%) and wipe the dirty
area.
• Then dip a cloth into fresh water, wring the water out of the cloth and wipe the detergent off.
• Then rub with a soft, dry cloth.
- Do not use organic solvent such as thinner, benzene, alcohol or gasoline.
- For genuine leather seats, use a genuine leather seat cleaner.
PREPARATION
WW-5
< PREPARATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
PREPARATION
PREPARATION
Special Service Tools
INFOID:0000000009756067
The actual shape of the tools may differ from those illustrated here.
Tool number
(TechMate No.)
Tool name
Description
—
(J-46534)
Trim Tool Set
Removing trim components
AWJIA0483ZZ
WW-6
< SYSTEM DESCRIPTION >
FRONT WIPER AND WASHER SYSTEM
SYSTEM DESCRIPTION
FRONT WIPER AND WASHER SYSTEM
Component Parts Location
INFOID:0000000009756068
FRONT WIPER AND WASHER SYSTEM
AWLIA1996ZZ
1. BCM (view under instrument panel,
left side of vehicle)
2. Combination meter
3. IPDM E/R (view with air inlet duct
removed)
4. Combination switch (wiper and
washer switch)
5. Front wiper motor (with wiper cowl
cover removed)
6. Front washer motor (with front
bumper removed)
FRONT WIPER AND WASHER SYSTEM
WW-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Component Description
INFOID:0000000009756069
Part
Description
Combination meter
Transmits the vehicle speed signal to BCM with CAN communication.
BCM
• Judges the switch status by the combination switch reading function.
• Requests (with CAN communication) the front wiper relay and the front wiper high
relay ON to IPDM E/R.
IPDM E/R
• Controls the integrated relay according to the request (with CAN communication)
from BCM.
• Performs the auto stop control of the front wiper.
Combination switch
(Wiper and washer switch)
• Provides input for wiper and washer control to the BCM.
• Refer to
.
Front washer motor
Washer fluid is sprayed according to combination switch signal.
Front wiper motor
• IPDM E/R controls front wiper operation.
• Front wiper stop position is transmitted to IPDM E/R.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст