Nissan Sentra. Manual — part 618
IP-16
< REMOVAL AND INSTALLATION >
STEERING COLUMN COVERS
STEERING COLUMN COVERS
Removal and Installation
INFOID:0000000009756854
REMOVAL
1. Remove the steering column cover screws (A), then remove the
steering column upper (1) and lower (2) covers.
NOTE:
• Shown with steering wheel removed for clarity.
• If necessary, rotate steering wheel to access steering column
cover screws (A).
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1003ZZ
CENTER CONSOLE ASSEMBLY
IP-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000009756855
Removal and Installation
INFOID:0000000009756856
REMOVAL
1. Remove the center console side finishers (1) (LH/RH).
a. Remove the center console side finisher screw (A) (LH/RH).
b. Release the clips using a suitable tool, then remove the center
console side finisher.
: Metal clip
1.
Center console upper finisher
2.
Center console side finisher (RH) 3.
Center console side finisher (LH)
4.
Center console side finisher screw cover (LH/
RH)
5.
Center console assembly
6.
Center console screw cover (LH/
RH)
7.
Center console rear finisher
8.
Center console rear finisher cover 9.
Center console coin tray (if
equipped)
10. Heated seat switch finisher (if equipped)
11. Center console cup holder finisher 12. Shift selector finisher
13. Storage bin
ALJIA1036ZZ
ALJIA1037ZZ
IP-18
< REMOVAL AND INSTALLATION >
CENTER CONSOLE ASSEMBLY
2. Remove the shift selector finisher (1).
a. Remove cluster lid C lower. Refer to
b. Remove the shift selector screws (A).
c.
Release the clips using a suitable tool, then remove the shift
selector finisher.
: Metal clip
3. Release the center console cup holder finisher clips, then
remove the center console cup holder finisher (1).
: Metal clip
4. Remove the center console screw cover (1) using a suitable tool
and the center console screws (A) (LH/RH).
5. Remove the remaining center console screws (A).
6. Disconnect the harness connectors from the center console assembly and remove.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1038ZZ
ALJIA1039ZZ
ALJIA1040ZZ
ALJIA1043ZZ
CLUSTER LID A
IP-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CLUSTER LID A
Removal and Installation
INFOID:0000000009756857
REMOVAL
1. Release cluster lid A clips and pawls using a suitable tool.
: Pawl
: Metal clip
2. Remove cluster lid A.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA1045ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст