Nissan Sentra. Manual — part 585
HAC-188
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONER]
A/C ASSEMBLY SWITCH
REMOVAL AND INSTALLATION
A/C ASSEMBLY SWITCH
Removal and Installation
INFOID:0000000009757775
REMOVAL
1. Remove the CVT shift selector finisher (CVT: RE0F11A). Refer to
TM-253, "Removal and Installation"
.
2. Remove the MT shift selector finisher (6MT: RS6F94R). Refer to
3. Remove the front air control screws.
4. Release the front air control metal clips using a suitable tool.
5. Disconnect the harness connectors from the A/C assembly switch and remove.
INSTALLATION
Installation is in the reverse order of removal.
A/C AUTO AMP.
HAC-189
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
A/C AUTO AMP.
Exploded View
INFOID:0000000009757776
Removal and Installation
INFOID:0000000009757777
REMOVAL
1. Remove the AV control unit. Refer to
AV-406, "Removal and Installation"
2. Remove the AV control unit bracket screws (A).
3. Remove the A/C auto amp.
INSTALLATION
Installation is in the reverse order of removal.
1.
AV control unit bracket (LH)
2.
AV control unit bracket (RH)
3.
A/C auto amp.
4.
AV control unit
ALIIA0666ZZ
ALIIA0667ZZ
HAC-190
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONER]
INTAKE SENSOR
INTAKE SENSOR
Removal and Installation
INFOID:0000000009757778
The intake sensor is serviced as an assembly with the heating and cooling unit assembly. Refer to
"HEATING AND COOLING UNIT ASSEMBLY : Removal and Installation"
REFRIGERANT PRESSURE SENSOR
HAC-191
< REMOVAL AND INSTALLATION >
[MANUAL AIR CONDITIONER]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
REFRIGERANT PRESSURE SENSOR
Removal and Installation
INFOID:0000000009757779
REMOVAL
1. Discharge the refrigerant. Refer to
2. Remove the core support upper. Refer to
3. Disconnect the harness connector from the refrigerant pressure sensor.
4. Remove the refrigerant pressure sensor (1).
CAUTION:
Cap or wrap the opening of the refrigerant pressure sensor
with suitable material such as vinyl tape to avoid the entry
of air.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Do not reuse O-ring.
• Apply A/C oil to the O-ring of the refrigerant pressure sensor for installation.
• After charging refrigerant, check for leaks. Refer to
.
ALIIA0669ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст