Nissan Sentra. Manual — part 506
PLEASE HELP MAKE THIS SERVICE MANUAL BETTER!
Your comments are important to NISSAN and will help us to improve our Service Manuals.
Use this form to report any issues or comments you may have regarding our Service Manuals.
Please print this form and type or write your comments below. Mail or fax to:
Nissan North America, Inc.
Technical Service Information
39001 Sunrise Drive, P.O. Box 9200
Farmington Hills, MI USA 48331
FAX: (248) 488-3880
SERVICE MANUAL:
Model:
Year:
PUBLICATION NO. (Refer to Quick Reference Index ):
Please describe any Service Manual issues or problems in detail:
Page number(s)
Note: Please include a copy of each page, marked with your comments.
Are the trouble diagnosis procedures logical and easy to use? (circle your answer)
YES
NO
If no, what page number(s)?
Note: Please include a copy of each page, marked with your comments.
Please describe the issue or problem in detail:
Is the organization of the manual clear and easy to follow? (circle your answer)
YES
NO
Please comment:
What information should be included in NISSAN Service Manuals to better support you in servicing or
repairing customer vehicles?
DATE:
YOUR NAME:
POSITION:
DEALER:
DEALER NO.:
ADDRESS:
CITY:
STATE/PROV./COUNTRY:
ZIP/POSTAL CODE:
2014
QUICK REFERENCE CHART: 2014 SENTRA NAM
QUICK REFERENCE CHART: 2014 SENTRA NAM
Engine Tune-up Data
INFOID:0000000010409363
GENERAL SPECIFICATIONS
Unit: degree
( ): Valve timing control “ON”
Drive Belt
INFOID:0000000010409362
DRIVE BELT
Spark Plug
INFOID:0000000010409361
SPARK PLUG
Unit: mm (in)
Engine type
MRA8DE
Cylinder arrangement
In-line 4
Displacement cm
3
(cu. in)
1,798 (109.7)
Bore and stroke mm (in)
79.7x90.1 (3.138x3.547)
Valve arrangement
DOHC
Firing order
1-3-4-2
Number of piston rings
Compression
2
Oil
1
Compression ratio
9.9
Compression pressure
kPa (bar, kg/cm
2
, psi)/250 rpm
Standard
1,380 (13.8, 14.1, 200.2)
Minimum
1,220 (12.2, 12.4, 176.9)
Differential limit between cylinders
100 (1.0, 1.0, 14.5)
Valve timing
Intake valve
Exhaust valve
a
b
c
d
e
f
220
228
−4 (35)
ATDC
52 (13)
ABDC
4 (64)
ATDC
36 (-24)
BBDC
JPBIA4228ZZ
Tension of drive belt
Belt tension is not necessary, as it is automatically adjusted by drive belt auto-tensioner.
Make
NGK
Standard type*
DILKAR6A-11 (California) or PLZKAR6A-11 (except California)
Gap (Nominal)
Standard
0.9 (0.035)
Limit
1.1 (0.043)
QUICK REFERENCE CHART: 2014 SENTRA NAM
2014
*:Always check with the Parts Department for the latest parts information.
Front Wheel Alignment (Unladen*
1
)
INFOID:0000000010409360
UNITED STATES and CANADA
*1: Fuel, engine coolant, and lubricants are full. Spare tire, jack, hand tools, and mats are in designated positions.
*2: The difference when assuming the (LH) side is the standard.
Rear Wheel Alignment (Unladen*
1
)
INFOID:0000000010409359
Camber
Degree minute (Decimal degree)
Minimum
–1
° 04′ (–1.07°)
Nominal
–0
° 25′ (–0.42°)
Maximum
0
° 14′ (0.23°)
(LH) and (RH) difference*
2
–0
° 35′ (–0.58°) - 0° 35′ (0.58°)
Caster
Degree minute (Decimal degree)
Minimum
4
° 05′ (4.08°)
Nominal
4
° 50′ (4.83°)
Maximum
5
° 35′ (5.58°)
(LH) and (RH) difference*
2
–0
° 45′ (–0.75°) - 0° 45′ (0.75°)
Kingpin inclination
Degree minute (Decimal degree)
Minimum
11
° 20′ (11.33°)
Nominal
12
° 05′ (12.08°)
Maximum
12
° 50′ (12.83°)
Total
toe-in
Distance (A - B)
Minimum
In 1 mm (In 0.04 in)
Nominal
In 2 mm (In 0.08 in)
Maximum
In 3 mm (In 0.12 in)
Angle (LH and RH)
Degree minute
(Decimal degree)
Minimum
In 0
° 04′ (In 0.07°)
Nominal
In 0
° 10′ (In 0.17°)
Maximum
In 0
° 16′ (In 0.27°)
SFA234AC
Camber
Degree minute (Decimal degree)
Minimum
−2° 00′ (−2.00°)
Nominal
−1° 30′ (−1.50°)
Maximum
−1° 00′ (−1.00°)
2014
QUICK REFERENCE CHART: 2014 SENTRA NAM
*1: Fuel, engine coolant, and lubricants are full. Spare tire, jack, hand tools, and mats are in designated positions.
*2: Since an adjustment mechanism is not included, the value of the left and right wheels (both wheels) must be used as the standard
value.
Wheelarch Height (Unladen*)
INFOID:0000000010409357
UNITED STATES
Unit: mm (in)
*: Fuel, engine coolant, and lubricants are full. Spare tire, jack, hand tools, and mats are in designated positions.
CANADA
Unit: mm (in)
Total toe-in
Distance (A - B)
Nominal
In 3.5 mm (In 0.138 in)
Angle (LH and RH)
*2
Degree minute (Decimal degree)
Minimum
Out 0
° 03′ (Out 0.05°)
Nominal
In 0
° 20′ (In 0.33°)
Maximum
In 0
° 43′ (In 0.71°)
SFA234AC
Transaxle
6M/T or CVT
CVT
Tire size
205/55R16 (Except FE)
205/55R16 (FE)
205/50R17
Front (Hf)
703 (27.68)
706 (27.80)
708 (27.87)
Rear (Hr)
703 (27.68)
706 (27.80)
707 (27.83)
LEIA0085E
Transaxle
6M/T or CVT
CVT
Tire size
205/55R16
205/50R17
LEIA0085E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст