Nissan Sentra. Manual — part 503
STEERING KNUCKLE
FSU-15
< REMOVAL AND INSTALLATION >
C
D
F
G
H
I
J
K
L
M
A
B
FSU
N
O
P
• Complete the inspection. Refer to
Inspection
INFOID:0000000009758763
INSPECTION AFTER REMOVAL
Check the following items, and replace the part if necessary.
• Check components for deformation, cracks, and other damage.
• Check boots of transverse link and steering outer socket ball joint for breakage, axial end play, and swing
torque.
- Transverse link: Refer to
.
- Steering outer socket: Refer to
.
INSPECTION AFTER INSTALLATION
1. Check the wheel sensor harness to be sure the connectors are fully seated.
2. Check the wheel alignment. Refer to
.
FSU-16
< UNIT REMOVAL AND INSTALLATION >
FRONT SUSPENSION MEMBER
UNIT REMOVAL AND INSTALLATION
FRONT SUSPENSION MEMBER
Exploded View
INFOID:0000000009758764
(CVT)
(M/T)
Removal and Installation
INFOID:0000000009758765
REMOVAL
1. Remove the front wheel and tire using power tool. Refer to
2. Remove the front under cover and the engine under cover. Refer to
.
3. Disconnect the steering gear from the lower shaft. Refer to
ST-12, "Removal and Installation"
.
AWEIA0293ZZ
1.
Upper link
2.
Front suspension member
3.
Member stay
Front
AWEIA0292ZZ
1.
Upper link
2.
Front suspension member
3.
Member stay
Front
FRONT SUSPENSION MEMBER
FSU-17
< UNIT REMOVAL AND INSTALLATION >
C
D
F
G
H
I
J
K
L
M
A
B
FSU
N
O
P
4. Disconnect the steering outer socket from the steering knuckle. Refer to
5. Remove the nut and bolt from the lower ball joint. Disconnect the transverse link from the steering
.
6. Remove the rear torque rod and the rear torque rod bracket.
• MRA8DE (M/T): Refer to
EM-82, "M/T : Removal and Installation"
EM-86, "CVT : Removal and Installation"
7. Disconnect the oxygen sensor. Refer to
EX-5, "Removal and Installation"
8. Disconnect the stabilizer connecting rod from the stabilizer bar. Refer to
9. Set a suitable jack under front suspension member.
CAUTION:
• At this step, the suitable jack must be set only for supporting the removal procedure. For details
on jacking up the vehicle, refer to
GI-31, "Garage Jack and Safety Stand and 2-Pole Lift"
.
• Do not damage the front suspension member with the suitable jack.
10. Remove the lower bolts from the upper links.
11. Remove the bolts and the member stay.
12. Remove the front suspension member bolts.
13. Gradually lower the suitable jack to remove the front suspension member from the vehicle.
CAUTION:
Make sure the front suspension member is stable when using the suitable jack.
14. If replacing the front suspension member, perform the following procedures:
• Remove the steering gear. Refer to
• Remove the transverse links. Refer to
.
• Remove the stabilizer bar, the stabilizer clamps, and the stabilizer bushings. Refer to
.
• Remove the oxygen sensor bracket. Refer to
15. Inspect the components. Refer to
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not reuse the transverse link nuts.
• Install the member stay bolts, the upper link bolts, and the front
suspension member bolts in the order of 1 to 10 as shown (if
equipped with the 6M/T).
• Install the member stay bolts, the upper link bolts, and the front
suspension member bolts in the order of 1 to 10 as shown (if
equipped with the CVT).
• Perform the final tightening of the nuts and bolts under unladen conditions with the tires on level ground.
• Complete the inspection. Refer to
Temporary tightening
: 1
→ 2→ 3 → 4
Final tightening
(Specified torque)
: 5
→ 6 → 7 → 8 → 9 → 10
: Front
JSEIA0426GB
Temporary tightening
: 1
→ 2→ 3 → 4
Final tightening
(Specified torque)
: 5
→ 6 → 7 → 8 → 9 → 10
: Front
AWEIA0298ZZ
FSU-18
< UNIT REMOVAL AND INSTALLATION >
FRONT SUSPENSION MEMBER
Inspection
INFOID:0000000009758766
INSPECTION AFTER REMOVAL
Check the front suspension member for cracks, wear or damage. Replace components if necessary.
INSPECTION AFTER INSTALLATION
1. Check the wheel sensor harness to be sure the connectors are fully seated.
2. Check the neutral position of the steering angle sensor. Refer to
3. Check the wheel alignment. Refer to
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст