Nissan Sentra. Manual — part 254
DLK-132
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
KEY REMINDER FUNCTION DOES NOT OPERATE
KEY REMINDER FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009756452
1.
CHECK ANTI KEY LOCK IN FUNCTI SETTING IN WORK SUPPORT
1. Select INTELLIGENT KEY of BCM using CONSULT.
2. Select ANTI KEY LOCK IN FUNCTI in WORK SUPPORT mode.
3. Check ANTI KEY LOCK IN FUNCTI setting in WORK SUPPORT.
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set On in ANTI KEY LOCK IN FUNCTI.
2.
CHECK DOOR SWITCH
Check door switch.
DLK-102, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
• Instrument center: Refer to
.
• Console: Refer to
• Trunk room: Refer to
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK UNLOCK SENSOR
Check unlock sensor.
DLK-97, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
REPLACE BCM
1. Replace BCM. Refer to
BCS-73, "Removal and Installation"
.
2. Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
OFF POSITION WARNING DOES NOT OPERATE
DLK-133
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
OFF POSITION WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009756453
1.
CHECK DTC WITH BCM
Check that DTC is not detected with BCM
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK DTC WITH COMBINATION METER
Check that DTC is not detected with combination meter
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
3.
CHECK DOOR SWITCH
Check front door switch (driver side).
DLK-102, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK COMBINATION METER BUZZER
Check combination meter buzzer.
DLK-91, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
DLK-91, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
REPLACE BCM
1. Replace BCM. Refer to
BCS-73, "Removal and Installation"
.
2. Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
DLK-134
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
P POSITION WARNING DOES NOT OPERATE
P POSITION WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009756454
1.
CHECK DTC WITH BCM
Check that DTC is not detected with BCM
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK DTC WITH COMBINATION METER
Check that DTC is not detected with combination meter
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
3.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
DLK-91, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK COMBINATION METER BUZZER
Check combination meter buzzer.
DLK-91, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK DOOR SWITCH
Check front door switch (driver side).
DLK-102, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CHECK KEY WARNING LAMP
Check key warning lamp.
DLK-107, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunctioning parts.
7.
CHECK SHIFT P WARNING LAMP
Check shift P warning lamp.
DLK-110, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 8.
NO
>> Repair or replace the malfunctioning parts.
8.
REPLACE BCM
1. Replace BCM. Refer to
BCS-73, "Removal and Installation"
.
2. Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
P POSITION WARNING DOES NOT OPERATE
DLK-135
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
NO
>> Check intermittent incident. Refer to
GI-39, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст